Management and Production Engineering Review

Zawartość

Management and Production Engineering Review | 2021 | vol. 12 | No 3

Abstrakt

Nowadays, the main challenge in maintenance is to establish a dynamic maintenance strategy to significantly track and improve the performance measures of multi-state systems in terms of production, quality, security and even the environment. This paper presents a quantitative approach based on Dynamic Bayesian Network (DBN) to model and evaluate the maintenance of multi-state system and their functional dependencies. According to transition relationships between the system states modeled by the Markov process, a DBN model is established. The objective is to evaluate the reliability and the availability of the system with taking into account the impact of maintenance strategies (perfect repair and imperfect repair). Using the proposed approach, the dynamic probabilities of system states can be determined and the subsystems contributing to system failure can also be identified. A practical application is demonstrated by a case study of a blower system. Through the result of the diagnostic inference, to improve the performances of the blower, the critical components C, F, W, and P should be given more attention. The results indicate also that the perfect repair strategy can improve significantly the performances of the blower, while the imperfect repair strategy cannot degrade the performances in comparison to the perfect repair strategy. These results show the effectiveness of this approach in the context of a predictive evaluation process and in providing the opportunity to evaluate the impact of the choices made on the future measurement of systems performances. Finally, through diagnostic analysis, intervention management and maintenance planning are managed efficiently and optimally.
Przejdź do artykułu

Autorzy i Afiliacje

Zakaria Dahia
Ahmed Bellaouar
Jean-Paul Dron

Abstrakt

Unrelated Parallel Machines Scheduling Problem (U-PMSP) is a category of discrete optimization problems in which various manufacturing jobs are assigned to identical parallel machines at particular times. In this paper, a specific production scheduling task the U-PMSP with Machine and Job Dependent Setup Times, Availability Constraint, Time Windows and Maintenance Times is introduced. Machines with different capacity limits and maintenance times are available to perform the tasks. After that our problem, the U-PMSP with Machine and Job Dependent Setup Times, Availability Constraints, Time Windows and Maintenance Times is detailed. After that, the applied optimization algorithm and their operators are introduced. The proposed algorithm is the genetic algorithm (GA), and proposed operators are the order crossover, partially matched crossover, cycle crossover and the 2-opt as a mutation operator. Then we prove the efficiency of our algorithm with test results. We also prove the efficiency of the algorithm on our own data set and benchmark data set. The authors conclude that this GA is effective for solving high complexity parallel machine problems.
Przejdź do artykułu

Autorzy i Afiliacje

Anita Agárdi
Károly Nehéz

Abstrakt

Small and medium-sized enterprises (SMEs) are facing barriers to grow due to the lack of structured procedures for upgrading and allocating the limited resources. To overcome these drawbacks and to improve business capabilities, a structured framework to conduct a comprehensive diagnostic and upgrading study is presented in this paper. The proposed framework involves four phases. First, the external and internal strategic factors, which can affect the enterprises’ performance are evaluated using strategic planning and assessment tools. Second, key upgrade performance indicators are developed and evaluated using multi-attribute rating techniques to guide, evaluate, and track progress of upgrading process. Third, a set of upgrade strategies are generated and evaluated using resource allocation model. Finally, a periodic re-evaluation plan is introduced to monitor the implementation progress. The developed framework for performance evaluation and upgrading is suitable to be used as a structured know-how procedure in manufacturing enterprises and can support entrepreneurs in their strategic decisions. To validate the proposed framework, a data set was collected from a local housecore company. As a result, one package of the efficient frontier strategies that represents the best use of resources was proposed for implementation.
Przejdź do artykułu

Autorzy i Afiliacje

Amer Momani
Tarek Al-Hawari
Sufyan Tahat

Abstrakt

Occupational risk is closely related to work environment. For the same positions, but in different working conditions threats and level of risk can be different. For this also estimating the degree of damage hazard the largest possible should be adopted effects. However, when estimating probability occurrence of threats should include, among others: working conditions, events from the past, or possible employee behavior (in particular those that may be the cause of an accident at work). The source of the above information may be data from statistics or observations of work stations. The article presents the assessment of occupational risk at the position of the laser cutter operator, which was carried out using the Job Safety Analysis (JSA) method. According to this method, occupational risk is determined on the basis of two parameters, i.e.: consequences of C and probability of consequences P. In turn, the probability of consequences is the sum of three factors: frequency of hazard F, probability of event O and avoidability or damage limitation A.
Przejdź do artykułu

Autorzy i Afiliacje

Michal Palega

Abstrakt

Warehouse and inventory management is a recurring issue in many of the different supply chains in diverse industries, where the constant changes in the markets have a direct impact on the management of warehouses and inventories, either generating over-stocks or shortages. This paper presents a case study on warehouse and inventory management control. The company under study was having problems in this area, where over-stocks were generated frequently, leading to various incidents, such as having to store finished and packaged product in unsuitable places, with the associated risk of deterioration. To deal with this problem, control tools based on the KPI (Key Performance Indicator) concept were developed. To this end, the corresponding problem and the information management process within the Supply Chain department had to be analyzed. In this case, it was observed that the databases were not synchronized, therefore strategies were proposed to systematize the collection and updating of data. In addition, to summarize the information, we proceeded to the implementation of an interactive form that facilitates the visualization and interpretation of the evolution of the process, and to be able to apply an efficient control on it, and thus to propose corrective actions supported by evidence.
Przejdź do artykułu

Autorzy i Afiliacje

Micaela Marziali
Daniel Alejandro Rossit
Adrián Toncovich

Abstrakt

Digital twin (DT) is a solution for presenting reality in a virtual world. DTs have been discussed in the literature only recently. The aim of this work is to review and analyse literature connected to DTs. Under a systematic literature review the authors searched databases for the information how DTs can support organization operations and how they can support sustainability of companies. A literature review was performed according to a developed research methodology, which covers research questions and keywords identification, selection criteria and results analysis. Databases, such as Web of Science, Scopus and Science Direct, were searched. The titles, abstracts and keywords were searched for works related to digital twins, sustainable development and manufacturing processes. Moreover, the search was focused on real-time monitoring, data, decision-making etc. The keywords used in the searching process are specified in the methodology. Afterwards, quantitate and qualitative analysis were performed taking into account number of publication, year of publications, type of publication, based on keywords and available information concerning the papers. Deeper analysis was performed on available full texts of the papers. The main goal of this paper was to assess how much the specified problem is discussed in literature in the context of production organizations and real-time and what kind of topics are present in publications to indicate future research needs.
Przejdź do artykułu

Autorzy i Afiliacje

Jerzy Pater
Dorota Stadnicka

Abstrakt

Management processes in an organization involve decision-making based on many criteria (MCDM), and in this process ranking of variables plays a vital role. This paper presents the analysis of key business issues of an Indian automotive organization using an efficient interpretive ranking (eIRP) approach. This paper integrates the Situation-Actor-Process (SAP) and Learning-Action-Performance (LAP) framework of the organization with eIRP. It evaluates the ranking of actions to be carried out in an organization with respect to performance parameters. The study highlights the area where the organization should focus on achieving desired business excellence. From the analysis, it is revealed that the top-ranked suggested action for the organization is the adoption of energy policy as a core business policy followed by technology management, maintenance management, and the use of information technology for cost management. This case study is one of the few that uses the SAP-LAP framework for ranking the actors and actions of the organization using the eIRP approach, to make MCDM an easy task.
Przejdź do artykułu

Autorzy i Afiliacje

Sumit Kumar
Pardeep Gupta

Abstrakt

This paper is the first to optimize the friction stir welding (FSW) process considering the Clamp Pitch (mm) and Clamping Torque effect using the Various combinations of parameters were constructed using factorial design and responses, resulting in a comprehensive factorial analysis. Conspicuous changes in the tensile strength, yield strength, hardness, and power profile were observed for all amalgamations of parameters. Significant parameters of the FSW process have been considered in many optimization studies, however, the effect of the Clamp Pitch (mm) and Clamping Torque (Nm) has been never studied. Three levels of three parameters were used in the experiments: Clamp Pitch, tool rotational speed and Clamping Torque. The full factorial analysis was performed, was applied as an approach for selecting the values of the Significant factors of the parameters. For each result the three key parameters were important with p-values of less than 0.05, suggesting their significance in the phase of FSW. Mathematical models built with high R-sq. and least percentage error were adequate for the investigated responses. The findings were gained by important parameter values factors of 30 mm, 1800 rpm and 70 Nm for the take into consideration parameter range for the Clamp Pitch, rotational speed and Clamping Torque respectively.
Przejdź do artykułu

Autorzy i Afiliacje

Ibrahim Sabry

Abstrakt

In this article conclusions from nearly 10 years of collaboration with Polish and German Engineer-to-Order (ETO) small and medium-sized enterprises (SMEs) from mechanical sector was presented. Research objective was to highlight common organizational problems they are dealing with, which prevent them from transition to Mass Customizers. As a result, a concept of 5 foundations for robust process design was proposed: procedures, product selection, machining philosophy, planning and storage, cross-functional teams. More practical solutions from this field have to be published to fill the research gap.
Przejdź do artykułu

Autorzy i Afiliacje

Bartosz Ciesla
Janusz Mleczko

Abstrakt

The article is devoted to the development of a multicomponent adaptive strategy for managing Russian high-tech enterprises in modern crisis conditions. Adaptability and flexibility are considered as the most important indicators of the efficiency of structures, their ability to ensure sustainable operation and effective innovative development of high-tech enterprises. A significant place in the article is devoted to possible approaches and methods of adaptive management of the enterprise in crisis, with the help of which changes in the internal and external environment are monitored, which can be expected and random, make current operational decisions that contribute to the achievement of pre-set goals based on correction of certain tasks. The questions about the quality of adaptation, adaptive characteristics of the structure and their consistency with the level and quality of adaptation of other elements of the enterprise, conjugation of adaptability and flexibility and pace of changes are considered. A number of modern techniques related to the development of strategies for the development of high-tech enterprises in crisis conditions are analyzed. The necessity of conducting a comprehensive accounting of the crisis as the main factor associated with the uncertainty of the external environment at the stage of strategic analysis is substantiated. There is an option, in which it is possible to include the crisis and its main characteristics into the strategic three competence model of the enterprise, as an additional controlled parameter. There is a general specificity of the formation of the strategy of a high-tech enterprise in conditions of risk and uncertainty.
Przejdź do artykułu

Autorzy i Afiliacje

Sergey V. Novikov
Gennady V. Tikhonov

Abstrakt

Wire electrical discharge machining (WEDM) is a non-conventional material-removal process where a continuously travelling electrically conductive wire is used as an electrode to erode material from a workpiece. To explore its fullest machining potential, there is always a requirement to examine the effects of its varied input parameters on the responses and resolve the best parametric setting. This paper proposes parametric analysis of a WEDM process by applying non-parametric decision tree algorithm, based on a past experimental dataset. Two decision tree-based classification methods, i.e. classification and regression tree (CART) and Chi-squared automatic interaction detection (CHAID) are considered here as the data mining tools to examine the influences of six WEDM process parameters on four responses, and identify the most preferred parametric mix to help in achieving the desired response values. The developed decision trees recognize pulse-on time as the most indicative WEDM process parameter impacting almost all the responses. Furthermore, a comparative analysis on the classification performance of CART and CHAID algorithms demonstrates the superiority of CART with higher overall classification accuracy and lower prediction risk.
Przejdź do artykułu

Autorzy i Afiliacje

Shruti Sudhakar Dandge
Shankar Chakraborty

Abstrakt

Supply chain management emerged as the ultimate management strategy to ensure the competitive advantages of companies in their markets. Suppliers are considered as inevitable sources of external risks in modern supply chains. In this respect, resonance is essential for the ability to adapt in resonance to disturbances and to restore in choosing suppliers. As suppliers of critical resources are vulnerable, choosing better suppliers to create resilience, and thereby reducing the risks in the supply chain as a whole. In recent years, emphasis has been placed on supply chain resilience and resilient suppliers, but few studies have been conducted on the evaluation and selection of resilient suppliers with multi-criteria decision making models. The main purposes of this study are a broad review of the literature on the resilient factor, factorization, efficiency of key factors in the reliance of suppliers and the ranking of resilient suppliers using the combined approach of SWARA and WASPAS. For this purpose, after a comprehensive review of Literature interview with the experts of petrochemical upstream industry, six key factors and overall resilience of suppliers were identified in eighteen factors. Then the weight of the dimensions was determined by using the SWARA method. The output of the method showed that supplier accountability and key performance factors were the most important factors in assessing the resilience of suppliers. Using the supporting method, five resilient suppliers were evaluated based on six dimensions and the final ranking of suppliers was determined. With this ranking, the industry will be a major step towards improving supply chain and increasing suppliers’ resilience to address disruptions and risks, improve supply and achieve competitive advantage and satisfy the consumers’ needs.
Przejdź do artykułu

Autorzy i Afiliacje

Mehdi Ajalli
1
Nima Saberifard
2
Babak Zinati
2

  1. Bu-Ali Sina University, Department of Management, Hamedan, Iran
  2. slamic Azad University, Department of Industrial Management, Rasht Branch, Rasht, Iran

Instrukcja dla autorów

All manuscripts should be submitted at:

https://www.editorialsystem.com/mper/

They are first examined by the Management and Production Engineering Review Editors. Manuscripts clearly not suitable for publication, incomplete or not prepared in the required style will be sent back to the authors without scientific review, but may be resubmitted as soon as they have been corrected. The ultimate decision to accept, accept subject to correction, or reject a manuscript lies within the prerogative of the Editor-in-Chief and is not subject to appeal. The editors are not obligated to justify their decision.

All manuscripts submitted to MPER at https://www.editorialsystem.com/mper/ will be sent to at least two and in some cases three reviewers for passing the double-blind review process. The responsible editor will make the decision either to send the manuscript to another reviewer to resolve the difference of opinion or return it to the authors for revision.

The material formatted in the MPER format must be unpublished and not under submission elsewhere. Once a year a list of co-operating reviewers is publish in electronic version of MPER.

All articles published in MPER are published in open access. In order to provide free access to readers, and to cover the costs of copyediting, typesetting, long-term archiving, and journal management, an article processing charge (APC) of 800 PLN (about 180 Euro, VAT included) for 10-page article applies to papers accepted after peer review. Each additional page of the article (over 10 pages) costs 80 PLN (about 18 Euro, VAT included). Maximum length of the article is 18 pages (using MPER template). There is no submission charge.

The average time during which the preliminary assessment of manuscripts is conducted - 14 days

The average time during which the reviews of manuscripts are conducted - 6 months

The average time in which the article is published - 12 months

Dodatkowe informacje

The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on https://creativecommons.org/licenses/by/4.0/.

Zasady etyki publikacyjnej

The ethics statements for the journal Management and Production Engineering Review are based on the guidelines of Committee on publication ethics (COPE) and the ELSEVIER publishing ethics resource kit.
For Authors: All articles, published in the journal Management and Production Engineering Review have to comprise a list of references which correspond with the journal’s Instructions to authors for paper preparation. The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted. All articles are tested using antyplagiarism programme. An author should not in general publish manuscripts describing essentially the same research in more than one journal or primary publication. Submitting the same manuscript to more than one journal concurrently constitutes unethical publishing behaviour and is unacceptable. Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study. The corresponding author should ensure that all co-authors have seen and approved the final version of the paper and have agreed to its submission for publication. All authors should disclose in their manuscript any financial or other substantive conflict of interest that might be construed to influence the results or interpretation of their manuscript. All sources of financial support for the project should be disclosed.
Authors are accountable for the originality, validity and integrity of the content of their submissions. In choosing to use AI tools, authors are expected to do so responsibly and in accordance with our editorial policies on authorship and principles of publishing ethics. Authorship requires taking accountability for content, consenting to publication via an author publishing agreement, giving contractual assurances about the integrity of the work, among other principles. These are uniquely human responsibilities that cannot be undertaken by AI tools. Therefore, AI tools must not be listed as an author. Authors must, however, acknowledge all sources and contributors included in their work. Where AI tools are used, such use must be acknowledged and documented appropriately.
For Editor-in-Chief: The editor is responsible for decision which of the articles submitted to the journal should be published. The editor and editorial board and office must not disclose any information about a submitted manuscript to anyone other than the corresponding author, reviewers, potential reviewers, other editorial advisers, and the publisher, as appropriate. Unpublished materials disclosed in a submitted manuscript must not be used in an editor's own research without the express written consent of the author.
For Reviewers: Peer review helps the editor in making editorial decisions and also assist the author in improving the paper. Any selected referee who feels unqualified to review the research reported in a manuscript or knows that its prompt review will be impossible should notify the editor and excuse himself from the review process. Any manuscripts received for review must be treated as confidential documents. They must not be shown to or discussed with others except as authorized by the editor. Reviews should be conducted objectively. Personal criticism of the author is inappropriate. Reviewers should identify relevant published work that has not been cited by the authors. Any statement that an observation, derivation, or argument had been previously reported should be accompanied by the relevant citation. A reviewer should also call to the editor's attention any substantial similarity or overlap between the manuscript under consideration and any other published paper of which they have personal knowledge. Information obtained through peer review must be kept confidential and not used for personal advantage. Reviewers should not consider manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the papers. Other sources: http://apem-journal.org/


Procedura recenzowania

Received manuscripts are first examined by the Management and Production Engineering Review Editors. Manuscripts clearly not suitable for publication, incomplete or not prepared in the required style will be sent back to the authors without scientific review, but may be resubmitted as soon as they have been corrected. The corresponding author will be notified by e-mail when the manuscript is registered at the Editorial Office (marta.grabowska@put.poznan.pl; mper@put.poznan.pl). The ultimate decision to accept, accept subject to correction, or reject a manuscript lies within the prerogative of the Editor-in-Chief and is not subject to appeal. The editors are not obligated to justify their decision. All manuscripts submitted to MPER editorial office (https://www.editorialsystem.com/mper/) will be sent to at least two and in some cases three reviewers for passing the double-blind review process. The responsible editor will make the decision either to send the manuscript to another reviewer to resolve the difference of opinion or return it to the authors for revision.

The average time during which the preliminary assessment of manuscripts is conducted - 14 days
The average time during which the reviews of manuscripts are conducted - 6 months
The average time in which the article is published - 8.4 months

Recenzenci

Name Surname Affiliation Hind Ali University of Technology, Iraq Katarzyna Antosz Rzeszow University of Technology, Poland Bagus Arthaya Mechatronics Engineering Universitas Parahyangan, Indonesia Sarini Azizan Australian National University, Australia Zbigniew Banaszak Management and Computer Science, Koszalin University of Technology, Poland Lucia Bednarova Technical University of Kosice, Slovak Republic Kamila Borsekova UNIVERZITA MATEJA BELA V BANSKEJ BYSTRICI, Slovak Republic RACHID Boutarfa Hassan First University, Morocco Anna Burduk Wrocław University of Science and Technology, Poland Virginia Casey Universidad Nacional de Rosario, Argentina Claudiu Cicea Bucharest University of Economic Studies Romania, Romania Ömer Cora Karadeniz Technical University, Turkey Wiesław Danielak Uniwersytet Zielonogórski, Poland" Jacek Diakun Poznan University of Technology, Poland Ewa Dostatni Poznan University of Technology, Poland Marek Dźwiarek Milan Edl University of West Bohemia, Czech Republic Joanna Ejdys Bialystok University of Technology, Poland Abdellah El barkany Sidi Mohamed Ben Abdellah University Faculty of Science and Technology of Fez, Morocco Francesco Facchini Università degli Studi di Bari, Italy Mária Magdolna Farkasné Fekete Szent István University, Hungary Çetin Fatih Başkent Üniversitesi, Turkey Mose Gallo Materials and Industrial Production Engineering, University of Napoli Federico, Italy Mit Gandhi Gujarat Gas Limited, India Józef Gawlik Cracow University of Technology, Institut of Production Engineering, Poland Andrzej Gessner Politechnika Poznańska, Poland Pedro Glass Universitatea Valahia din Targoviste, Romania Arkadiusz Gola Lublin University of Technology, Faculty of Mechanical Engineering, Poland Alireza Goli Department of industrial engineering, Yazd university, Yazd, Iran Iran, Iran Magdalena Graczyk-Kucharska Politechnika Poznańska, Poland Damian Grajewski Poznan University of Technology, Poland Łukasz Grudzień Production Engineering Department, Poznan University of Technology, Poland Patrik Grznár University of Žilina, Slovak Republic" Anouar Hallioui INTI International University, Malaysia Ali HAMIDOGLU Adam Hamrol Mechanical Engineering, Poznan University of Technology, Poland ni luh putu hariastuti itats, Indonesia Christian Harito Bina Nusantara University, Indonesia Muatazz Hazza "Mechanical and Industrial Engineering Department; School of Engineering. American University of Ras Al Khaimah. United Arab Emirates, United Arab Emirates" Ali Jaboob Dhofar University, Oman Małgorzata Jasiulewicz-Kaczmarek Poznan University of Technology, Poland Oláh Judit University of Debrecen, Hungary Jan Klimek Szkoła Główna Handlowa, Poland Nataliia Klymenko National University of Life and Environmental Sciences of Ukraine, Ukraine Peter Kostal Slovenská Technická Univerzita V Bratislave, Slovak Republic Martin Krajčovič University of Žilina, Slovak Republic Robert Kucęba Wydział Zarządzania, Politechnika Częstochowska, Poland Agnieszka Kujawińska Poznan University of Technology Edyta Kulej-Dudek Politechnika Częstochowska, Poland Sławomir Kłos Institute of Mechanical Engineering, University of Zielona Góra, Poland Christian Landschützer Graz University of Technology, Austria Anna Lewandowska-Ciszek Department of Logistics, Poznań University of Economics and Business, Poland Damjan Maletič University of Maribor, Faculty of Organizational Sciences, Slovenia Marcela Malindzakova Technical University, Slovak Republic Józef Matuszek Janusz MLECZKO Rami Mokao MIS - Management Information Systems, HIAST, Syria Maria Elena Nenni University of Naples, Italy Nor Hasrul Akhmal Ngadiman School of Mechanical Engineering, Universiti Teknologi Malaysia, Malaysia Dinh Son Nguyen The University of Danang, University of Science and Technology, Viet Nam Duc Duy Nguyen Department of Industrial Systems Engineering,
Ho Chi Minh Technology University (HCMUT), Viet Nam Filscha Nurprihatin Sampoerna University, Indonesia Filip Osiński Poznan University of Technology Ivan Pavlenko Department of General Mechanics and Machine Dynamics, Sumy State University, Ukraine Robert Perkin BorgWarner, United States Alin Pop University of Oradea, Romania Ravipudi Venkata Rao "Department of Mechanical Engineering S. V. National Institute of Technology, Surat, India" Marta Rinaldi University of Campania, Italy Michał Rogalewicz Division of Production Engineering, Institute of Materials Technology, Faculty of Mechanical Engineering, Poznan University of Technology, Poland David Romero Tecnológico de Monterrey, Mexico ELMADANI SAAD Hassan First university of Settat, Morocco Krzysztof Santarek Faculty of Mechanical and Industrial Engineering, Warsaw University of Technology, Poland shankar sehgal Panjab University Chandigarh, India Robert Sika Faculty of Mechanical Engineering and Management, Institute of Materials Technology, Poland Chansiri Singhtaun Department of Industrial Engineering, Faculty of Engineering, Kasetsart University, Thailand Bożena Skołud Silesian University of Technology, Poland Lucjan Sobiesław Jagiellonian University, Poland Fabiana TORNESE University of Salento, Italy Stefan Trzcielinski Poznan University of Technology, Poland Amit Kumar Tyagi Centre for Advanced Data Science, India Cang Vo Binh Duong University, Viet Nam Jaroslav Vrchota University of South Bohemia České Budějovice, Faculty of Economics, Department of Management, Studentská, 370 05 České Budějovice, Czech Republic Radosław Wichniarek Poznan University of Technology, Poland Ewa Więcek-Janka Wydział Inżynierii Zarządzania, Politechnika Poznańska, Poland Josef Zajac Uniwersytet Techniczny w Koszycach, Slovak Republic Aurora Zen Universidade Federal do Rio Grande do Sul, Brazil

Ta strona wykorzystuje pliki 'cookies'. Więcej informacji