A buckling analysis of temperature-dependent embedded plates reinforced by single-walled carbon nanotubes (SWCNTs) subjected to a magnetic field is investigated. The SWCNTs are distributed as uniform (UD) and three types of functionally graded nanotubes (FG), in which the material properties of the nano-composite plate are estimated based on the mixture rule. The surrounding temperature-dependent elastic medium is simulated as Pasternak foundation. Based on the orthotropic Mindlin plate theory, the governing equations are derived using Hamilton's principle. The buckling load of the structure is calculated based on an exact solution by the Navier method. The influences of elastic medium, magnetic field, temperature and distribution type, and volume fractions of SWCNT are shown on the buckling of the plate. Results indicate that CNT distribution close to the top and bottom are more efficient than that distributed near the mid-plane for increasing the stiffness of the plates.

The paper presents methods of analytical and measurement-based determination of pressures acting on sheet metal in the process of electrodynamic forming by means of flat inductors generating pulse magnetic field. Pressures are determined for sheet metal of different thicknesses processed by means of circular and elliptical spiral inductors. The paper describes also examples of copper and aluminium sheet metal forming conducted by means of the analysed inductors and shaped forming dies.

This paper summarizes the activity of the chosen Polish geodetic research teams in 2015–2018 in the fields of Earth: rotation, dynamics as well as magnetic field. It has been prepared for the needs of the presentation on the 27th International Union of Geodesy and Geodynamics General Assembly, Montreal, Canada. The part concerning Earth rotation is mostly focused on the use of modelling of diurnal and subdiurnal components of Earth rotation by including low frequency components of polar motion and UT1 in the analysis, study of free oscillations in Earth rotation derived from both space-geodetic observations of polar motion and the time variation of the second degree gravitational field coefficients derived from Satellite Laser Ranging (SLR) and Gravity Recovery and Climate Experiment (GRACE) observations, new methods of monitoring of Earth rotation, as well as studies on applications of the Ring Laser Gyroscope (RLG) for direct and continuous measurements of changes in Earth rotation and investigations of the hydrological excitation of polar motion. Much attention was devoted to the GRACE-derived gravity for explaining the influence of surface mass redistributions on polar motion. Monitoring of the geodynamical phenomena is divided into study on local and regional dynamics using permanent observations, investigation on tidal phenomena, as well as research on hydrological processes and sea level variation parts. Finally, the recent research conducted by Polish scientists on the Earth’s magnetic field is described.

W artykule przedstawiono wyniki badań nad wpływem stałego pola magnetycznego na usuwanie związków organicznych i azotu amonowego wysokoobciążonym osadem czynnym. Badania prowadzono w skali laboratoryjnej, w temperaturze pokojowej, w trzech lub dwóch układach działających równolegle. W dwóch układach recyrkulowany osad czynny eksponowano w polu magnetycznym o indukcji 20 mT lub 40 mT. Magnetyzer umieszczono na przewodzie przeznaczonym do recyrkulacji osadu czynnego. Szybkość nitryfikacji w układzie, w którym recyrkulowany osad czynny eksponowano w polu magnetycznym była wyższa w porównaniu z układem działającym poza oddziaływaniem pola magnetycznego. Prowadząc badania przy obciążeniu osadu czynnego w zakresie od 0,6 do 0,9 g ChZTlg_,m·d obserwowano, że szybkość nitryfikacji w układzie, w którym recyrkulowany osad czynny eksponowano w polu magnetycznym o indukcji 40 mT była 2 razy wyższa w porównaniu z układem kontrolnym. Wyniki świadczą o tym, że pole magnetyczne może być czynnikiem wspomagającym nitryfikację ścieków wysokoobciążonym osadem czynnym.

W artykule przedstawiono wyniki badań nad wpływem stałego pola magnetycznego na przemiany związków organicznych i azotu amonowego. Badania prowadzono w skali laboratoryjnej w temperaturze pokojowej w dwóch układach działających równolegle. Wjednym z układów ścieki surowe eksponowano w polu magnetycznym o indukcji 180 mT. Magnetyzer umieszczono na przewodzie doprowadzającym ścieki surowe. Drugi układ traktowano jako układ kontrolny. Badania realizowano bez udziału osadu czynnego oraz z udziałem osadu czynnego. Prowadząc badania w eksperymencie bez osadu czynnego odnotowano wyższy o 15% stopień usunięcia ChZT w układzie, w którym ścieki surowe eksponowano w polu magnetycznym o indukcji 180 mT w porównaniu z układem działającym poza oddziaływaniem pola magnetycznego. Prowadząc badania z wykorzystaniem osadu czynnego wykazano, że stopień usunięcia ChZT utrzymywał się na podobnym poziomie w obu układach. Szybkość nitryfikacji w układzie, w którym ścieki surowe eksponowano w polu magnetycznym była niższa w porównaniu z układem działającym poza oddziaływaniem pola magnetycznego.

3D printing is a technology with possibilities related to the production of elements of any geometry, directly from a digital project. Elements made of plastic are metalized to give new properties such as conductivity or corrosion resistance. In this work, experimental work related to the electroless deposition of metallic coatings on plastics was carried out. For this purpose, the copper and nickel coatings were catalytically deposited on elements printed using hard-lightened resin. The effect of the metallization time on the properties of copper and nickel coatings was determined. In addition, the process of deposition metals in the magnetic field was analyzed with different direction of magnetic field to the surface of the samples. The coatings were analyzed by XRF, XRD method and morphology of surface was observed by scanning electron microscopy (SEM).

We propose a novel magnetic field sensitive semiconductor device, viz., Horizontally-Split-Drain Magnetic-Field Sensitive Field-Effect Transistor (HSDMAGFET) which can be used to measure or detect steady or variable magnetic fields. Operating principle of the transistor is based on one of the galvanomagnetic phenomena and a Gradual Channel Detachment Effect (GCDE) and is very similar to that of Popovic and Baltes's SDMAGFET. The predicted absolute sensitivity of the new sensor can reach as high value as 1000 V/T. Furthermore, due to its original structure, the spatial resolution of the new MAGFET is very high which makes this device especially useful in reading magnetically encoded data or magnetic pattern recognition.

A ship built from ferromagnetic steel disturbs the uniformity of the Earth’s magnetic field. Changes of ship’s signature are due to the magneto-mechanical interaction of the hull with the Earth’s magnetic field. The ship’s magnetic field can be detected by a magnetic naval mine. For this reason, the vessel has to be demagnetized. There are several methods of ship’s de-perming. The results of experimental and computer simulations of the ship’s de-perming process using coils lying on the seabed are presented in this paper. The simulation of the de-perming process with a hysteresis model of ship’s steel was carried out in Opera-3d 18R2. The laboratory experiments were carried out using a physical ship’s model, several Helmholtz coils, magneto-resistive sensors, etc. The experiments and computer simulations have shown that ship’s de-perming with coils lying on the seabed is possible. The values of coil currents are over dozen times greater than those used in the standard method.

The Kibble balance experiment is used to redefine the kilogram as a unit of mass based on the Planck constant. To demonstrate and understand the basic principle of the Kibble balance, the National Institute of Standards (NIS)-Egypt has constructed a prototype Kibble balance that can measure gram-level masses with 0.01% relative uncertainty. Through the construction of this prototype, the challenges can be studied and addressed to overcome the weaknesses of NIS’s prototype. This study presents the design and construction of the prototype Kibble balance. It also focuses on the design and performance of the magnetic system, which is a crucial element of the Kibble balance. Analytical modeling and finite element analysis were used to evaluate and improve the magnet system. Several other aspects were also discussed, including the yoke’s material and enhancing the magnetic profile within the air gap of the magnet system. Over a vertical distance of 30 mm inside the air gap, the magnetic flux density was found to be 0.3 T, and the uniformity was found to be 8 x 10 ^-5.

Influence of magnetic field on parameters of normal detonation wave and cumulation process of cylindrical detonation wave in gaseous explosive mixture was examined. A review of applications of generalised Chester-Chisnell-Whitham (CCW) method used for analysis of implosion processes of detonation waves is presented.

The article deals with effect the use of organic (biohumus) and mineral (biochar) fertilizers based on the products of chicken vital activity on changing the fertility of technogenic sod-podzolic soils exposed to constant and unstable magnetic fields. The germination and growth dynamics of grasses and onions were investigated. The rational rate of introduction of the studied fertilizers into the technogenic soil is determined. Running (RMF) and direct (DMF) magnetic fields were applied in two ways: with fertilizers added and without fertilizers added. It has been established that the effect of preliminary magnetization of technogenic soil has a significant effect on lawn grass germination and the length of onion feathers, which are more than twice the height when exposed to the RMF, as compared with DMF. The effect of RMF on grass germination was also twice as high for DMF, when fertilizers were added. The DMF mag-netization and biohumus helps to increase the grass sprout height by 10–20%. Onion sprouts were higher in two cases: DMF and biohumus; RMF and biochar. The influence of the factor of fertilizer type has a significant effect in 30–40% of cases, whilst at a spread rate of more than 5%, significant chemical activity of biochar negatively affects the germination of both grass and onion.

This paper presents the summary of research activities carried out in Poland in 2011–2014 in the field of Earth rotation and geodynamics by several Polish research institutions. It contains a summary of works on Earth rotation, including evaluation and prediction of its parameters and analysis of the related excitation data as well as research on associated geodynamic phenomena such as geocentre motion, global sea level change and hydrological processes. The second part of the paper deals with monitoring of geodynamic phenomena. It contains analysis of geodynamic networks of local, and regional scale using space (GNSS and SLR) techniques, Earth tides monitoring with gravimeters and water-tube hydrostatic clinometer, and the determination of secular variation of the Earth’ magnetic field.

Electromagnetic arrangements which create a magnetic field of required distribution and magnitude are widely used in electrical engineering. Development of new accurate designing methods is still a valid topic of technical investigations. From the theoretical point of view the problem belongs to magnetic fields synthesis theory. This paper discusses a problem of designing a shape of a solenoid which produces a uniform magnetic field on its axis. The method of finding an optimal shape is based on a genetic algorithm (GA) coupled with Bézier curves.

The development of a distributed generation will influence the structure of the power transmission and distribution network. Distributed sources have lower power and therefore the lines of lower voltage are used. Therefore, the electric field intensity near such lines is lower. On the other hand magnetic field intensity may prove essential. The main aim of the paper is to present a method estimating the “ballast” of the natural environment at 50 Hz electric and magnetic fields in the power system, with distributed and centralized generation in real operating conditions.

Energy based approach was used in the study to formulate a set of functions approximating the magnetic flux linkages versus independent currents. The simplest power series that approximates field co-energy and linked fluxes for a two winding core of an induction machine are described by a set of common unknown coefficients. The authors tested three algorithms for the coefficient estimation using Weighted Least-Squared Method for two different positions of the coils. The comparison of the approximation accuracy was accomplished in the specified area of the currents. All proposed algorithms of the coefficient estimation have been found to be effective. The algorithm based solely on the magnetic field co-energy values is significantly simpler than the method based on the magnetic flux linkages estimation concept. The algorithm based on the field co-energy and linked fluxes seems to be the most suitable for determining simultaneously the coefficients of power series approximating linked fluxes and field co-energy.

The effect of rotating magnetic field on the heat transfer process in a magnetically assisted bioreactor was studied experimentally. Experimental investigations are provided for the explanation of the influence of the rotating magnetic field on natural convection. The heat transfer coefficients and the Nusselt numbers were determined as a function of the product of Grashof and Prandtl dimensionless numbers. Moreover, the comparison of the thermal performance between the tested set-up and a vertical cylinder was carried out. The relative enhancement of heat transfer was characterized by the rate of the relative heat transfer intensification. The study showed that along with the intensity of the magnetic field the heat transfer increased.

The aim of the study was to present an experimental investigation of the influence of the RMF on mixing time. The obtained results suggest that the homogenization time for the tested experimental set-up depending on the frequency of the RMF can be worked out by means of the relationship between the dimensionless mixing time number and the Reynolds number. It was shown that the magnetic field can be applied successfully to mixing liquids.

The main objective of these experiments was to study the oxygen mass transfer rate through the volumetric mass transfer coefficient (kLa) for an experimental set-up equipped with a rotating magnetic field (RMF) generator and various liquids. The experimental results indicated that kLa increased along the magnetic strength and the superficial gas velocity. Mathematical correlations defining the influence of the considered factors on kLa were proposed.

This paper presents a geomagnetic detection method for pipeline defects using complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) and wavelet energy product (WEP) – Teager energy operator (TEO), which improves detection accuracy and defect identification ability as encountering strong inference noise. The measured signal is first subtly decomposed via CEEMDAN into a series of intrinsic mode functions (IMFs), which are then distinguished by the Hurst exponent to reconstruct the filtered signal. Subsequently, the scale signals are obtained by using gradient calculation and discrete wavelet transform and are then fused by using WEP. Finally, TEO is implemented to enhance defect signal amplitude, completing geomagnetic detection of pipeline defects. The simulation results created by magnetic dipole in a noisy environment, indoor experiment results and field testing results certify that the proposed method outperforms ensemble empirical mode decomposition (EEMD)-gradient, EEMD-WEP-TEO, CEEMDAN-gradient in terms of detection deviation, peak side-lobe ratio (PSLR) and integrated side-lobe ratio (ISLR).

The paper presents a description of the phenomena occurring on the surface of the forging dies. A detailed analysis was made of 24 pre-forging dies due to the most intensive wear in this operation. To compare the results, new tools were also analysed. The research described in the study showed that the most dangerous factor for the hot forging process analysed is thermal-mechanical fatigue, which causes small cracks, which in turn quickly leads to the formation of a crack network on the entire contact surface of the tool with forged material. The second phenomenon is the tempering of the surface of the material for a long-term temperature effect. The presence of hard iron oxides in the form of scale from forging material is the accompanying phenomenon that intensifies the processes of tool wear. The paper presents the results of the analysis of the presence of residual magnetic field for forging tools and the results of laboratory tests of wear processes of tool steels for hot work in the presence of a magnetic field and in the presence of scale.

The current research aimed to use non traditional methods to control some stored grain insects. The effects of 180 millitesla (mT) magnetic field (MF) for six different exposure periods (3 min, 30 min, 1 h, 12 h, 24 h and 48 h) on mortality (%) of two stored grain insects, Tribolium casteneum adults and Trogoderma granarium larvae, reduction in F1-progeny (%), seeds germination (%) and seed components (%) after 8 months storage period were studied under laboratory conditions. According to results, the mortality (%) of tested insects increased with increasing of MF time exposure. Trogoderma granarium was more resistant than T. casteneum in which mortality reached 56 and 75%, respectively 14 days after from exposure period. Without any negative effect on seeds germination (%) the MF was very effective in protecting stored wheat from insect infestation up to 8 months compared to non-magnetic seeds which became infested after 3 months of storage. Furthermore, the germination (%) was accelerated by 6 h compared to non-magnetic seeds. The MF level caused a slight increase in the percent of total carbohydrate, crude protein and ash while slightly decrease the percent of moisture, total fats and crude fiber.

The effect of a static magnetic field (MF) of 7 mT with phenol (P) or p-chlorophenol (p-chP) concentrations of 100 mg∙dm ^–3 on the proliferation of Saccharomyces cerevisiae yeast was investigated. The abundance of the microorganism was determined under static culture conditions on a YPG medium with or without the addition of P or p-chP and exposed or unexposed to the MF over 48 h of the experiment. A static MF of 7 mT was shown to have a stimulating effect on S. cerevisiae cell proliferation after 24 h. It was proved that P and p-chP were used as an additional carbon source by yeasts. The greatest stimulation of the growth of the studied microorganisms was observed under the simultaneous effect of an MF and in presence of either P or p-chP. It was generally about 2 times higher at the time of the study than in the control. Statistical analysis of the results was carried out using, among other things, analysis of variance (ANOVA). A statistically significant difference in the growth of the tested microorganisms was observed. The study results indicate the possibility of applying an MF of 7 mT to enhance the process of phenol and p-chlorophenol removal from industrial wastewater.