Nauki Techniczne

Archives of Thermodynamics

Zawartość

Archives of Thermodynamics | 2022 | vol. 43 | No 4

Abstrakt

An analysis of the methods used in Bulgaria for estimating CO2, SO2 and dust emissions has been conducted. The first methodology, which is officially used by all energy auditors at the Agency for Sustainable Energy Development targets the energy efficiency of combustion devices installed mainly at industrial enterprises. The second methodology, used by the Ministry of Environment and Water, is more comprehensive and can be applied to thermal power plants, small combustion plants as well as industrial systems. In recent years, many projects related to energy efficiency and renewable energy projects, including hydrogen technologies, which require an assessment of reduced greenhouse gas emissions, have been implemented as a priority. The use of reliable and accurate methods is essential in the assessment of greenhouse emissions. A novel methodology, based on stoichiometric equations of the combustion process for solid, liquid and gaseous fuels has been proposed and comprised. This novel methodology is characterized by higher precision compared to the methods currently in place and this is achieved through calculating emissions from the combustion of energy fuels accounting for the full elemental composition of the fuel and its heating value, whereas the current commonly applied methods use only the fuel type and the carbon content. A further benefit of the proposed methodology is the ability to estimate emissions of fuels for which there is no alternative method for calculating CO2, SO2 and dust. Results of emission calculations according to the analysed methods are presented. Finally, a comparative analysis between the presented methodologies including an assessment of their accuracy and universal applicability has been made.
Przejdź do artykułu

Autorzy i Afiliacje

Iliya Krastev Iliev
1
Hristo Ivanov Beloev
1
Diana Ivanova Ilieva
2
Janusz Badur
3

  1. University of Ruse, Heat, Hydraulics and Environmental Engineering, Studentska 8, 7017 Ruse, Bulgaria
  2. University of Telecommunications and Post, Akad. Stefan Mladenov 1, 1700 Sofia, Bulgaria
  3. Energy Conversion Department, Institute of Fluid Flow Machinery, Polish Academy of Sciences, Fiszera 14, 80-251 Gdansk, Poland

Abstrakt

The energy sector is a majorarea that is responsible for the country development. Almost 40% of the total energy requirement of an EU country is consumed by the building sector and 60% of which is only used for heating and cooling requirements. This is a prime concern as fossil fuel stocks are depleting and global warming is rising. This is where thermal energy storage can play a major role and reduce the dependence on the use of fossil fuels for energy requirements (heating and cooling) of the building sector. Thermal energy storage refers to the technology which is related to the transfer and storage of heat energy predominantly from solar radiation, alternatively to the transfer and storage of cold from the environment to maintain a comfortable temperature for the inhabitants in the buildings by providing cold in the summer and heat in the winter. This work is an extensive study on the use of thermal energy storage in buildings. It discusses different methods of implementing thermal energy storage into buildings, specifically the use of phase change materials, and also highlights the challenges and opportunities related to implementing this technology. Moreover, this work explains the principles of different types and methods involved in thermal energy storage.
Przejdź do artykułu

Autorzy i Afiliacje

Priyam Deka
1
Andrzej Szlęk
1

  1. Silesian University of Technology, Faculty of Energy and Environmental Engineering, Konarskiego 18, 44-100, Gliwice, Poland

Abstrakt

Shell and tube heat exchangers are commonly used in a wide range of practical engineering. The key issue in such a system is the heat exchange between the hot and cold working media. An increased cost of production of these devices has forced all manufacturing companies to reduce the total amount of used materials by better optimizing their construction. Numerous studies on the heat exchanger design codes have been carried out, basically focusing on the use of fully time-dependent partial differential equations for mass, momentum, and energy balance. They are very complex and time-consuming, especially when the designers want to have full information in a full 3D system. The paper presents the 1D mathematical model for analysis of the thermal performance of the counter-current heat exchanger comprised of mixed time-dependent and time-independent equations, solved by the upwind numerical solution method, which allows for a reduction in the CPU time for obtaining the proper solution. The comparison of numerical results obtained from an in-house program called Upwind Heat Exchanger Solver written in a Fortran code, with those derived using commercial software package ASPEN, and those obtained experimentally, shows very good agreement in terms of the temperature and pressure distribution predictions. The proposed method for fast designing calculations appears beneficial for other tube shapes and types of heat exchangers.
Przejdź do artykułu

Autorzy i Afiliacje

Dariusz Kardaś
1
Izabela Wardach-Święcicka
1
Artur Grajewski
2

  1. The Szewalski Institute of Fluid Flow Machinery, Polish Academy of Sciences, Fiszera 14, 80-231 Gdansk, Poland
  2. HEXONIC Sp. z o.o., Warszawska 50, 82-100 Nowy Dwór Gdanski, Poland

Abstrakt

In this study, a theoretical model is presented to investigate the performance of a thermoelectric (TE) radiant cooling system combined with photovoltaic (PV) modules as a power supply in a building with an ambient temperature reaching more than 45ºC. The combined system TE/PV performance is studied under different solar radiation by using the hourly analysis program and photovoltaic system software. The thermal and electric characteristics of TE are theoretically investigated under various supplied voltages using the multi-paradigm programming language and numerical computing environment. Also, a theoretical analysis of heat transfer between the TE radiant cooling system and an occupied zone from the side, and the other side between the TE radiant cooling system and duct zone is presented. The maximum power consumption by TE panels and building cooling load of 130 kW is predicted for May and June. The 145 units of PV panels could provide about 50% of the power required by TE panels. The thermal and electric characteristics of TE panels results show the minimum cold surface temperature of 15ºC at a supplied voltage between 6 V and 7 V, and the maximum hot surface temperature of 62ºC at a supplied voltage of 16 V. The surface temperature difference between supplied current and supplied power increases as supplied voltage increases. At a higher supplied voltage of 16 V, the maximum surface temperature difference between supplied current, and supplied power of 150ºC, 3.2 A, and 48 W, respectively. The cooling capacity increases as supplied voltage increases, at a surface temperature difference of –10ºC and supplied voltage of 16 V, the maximum cooling capacity is founded at about 60 W. As supplied voltage decreases the coefficient of performance increases. The maximum coefficient of performance is about 5 at the surface temperature difference of –10ºC and supplied voltage of 8 V.
Przejdź do artykułu

Autorzy i Afiliacje

Israa Ali Abdulghafor
1
Mohannad Jabbar Mnati
1

  1. Middle Technical University, Institute of Technology Baghdad, Al-Za’franiya, 10074, Baghdad, Iraq

Abstrakt

The present study aims at investigating and simulating the hydrogen cycle production at low temperatures using thermochemical reactions. The cycle used in this work is based on the dissociation of water molecules depending on a copper chlorine couple. Furthermore, the proposed method uses mainly thermal energy provided by a solar thermal field. This proposed cycle differs from what is found in the literature. However, most of the thermochemical cycles for hydrogen production work at quite high temperatures which is a technical challenge. Therefore, the maximum temperature used in the present cycle is limited to 500°C. A thermodynamic analysis based on both the first and second laws is performed to evaluate the energy, exergy and efficiency of each reaction as well as the overall exergetic efficiency of the system. Furthermore, a parametric study is conducted to figure out the impact of the surrounding temperatures on the overall exergetic efficiency using commercial energy simulation software. The results show that the cycle can achieve an exergy efficiency of 30.5%.
Przejdź do artykułu

Autorzy i Afiliacje

Omar Benbrika
1
Ahmed Bensenouci
1
Mohamed Tegar
1
Kamal R.A. Ismail
2

  1. Department of Mechanics, Amar Telidji University of Laghouat, B.P. 37G Laghouat 03000, Algeria
  2. University of Campinas, Sao Paulo 13083-970, Brazil

Abstrakt

The paper presents a theoretical analysis of thermal energy storage filled with phase change material (PCM) that is aimed at optimization of an adsorption chiller performance in an air-conditioning system. The equations describing a lumped parameter model were used to analyze internal heat transfer in the cooling installation. Those equations result from the energy balances of the chiller, PCM thermal storage unit and heat load. The influence of the control of the heat transfer fluid flow rate and heat capacity of the system components on the whole system operation was investigated. The model was used to validate the selection of Rubitherm RT62HC as a PCM for thermal storage. It also allowed us to assess the temperature levels that are likely to appear during the operation of the system before it will be constructed.
Przejdź do artykułu

Autorzy i Afiliacje

Jarosław Karwacki
1
Roman Kwidziński
1
Piotr Leputa
1 2

  1. The Szewalski Institute of Fluid Flow Machinery, Polish Academy of Sciences, Heat Transfer Department, Fiszera 14, 80-231 Gdansk, Poland
  2. ENERGA Ciepło Ostrołeka Sp. z o.o., Celna 13, 07-410 Ostrołeka, Poland

Instrukcja dla autorów

Submission of manuscript
Manuscripts should be electronically submitted to the Editorial System http://www.editorialsystem.com/aot. Each manuscript should be accompanied by a cover letter explaining why the manuscript is considered suitable for publication in the journal. The letter should contain:

• full title of the paper,
• full list of authors with affiliations,
• e-mail address of the authors,
• contact address and telephone numbers of the corresponding author.

The cover letter should explicitly state that the manuscript has not been previously published in any language anywhere and that it is not under simultaneous consideration or in press by another journal.

Manuscripts that have been previously rejected, or withdrawn after being returned for modification, may be resubmitted if the major criticisms have been addressed. The cover letter must state that the manuscript is a resubmission, and the former manuscript number should be provided.
All authors of the manuscript are responsible for its content; they must have agreed to its publication and have given the corresponding author the authority to act on their behalf. The corresponding author is responsible for informing the co-authors of the manuscript status throughout the submission, review, and production process.

From January 1, 2024, the authors are requested to submit their paper using a dedicated template provided at the AOT webpage https://www.imp.gda.pl/archives-of-thermodynamics/.


Notes for Contributors

Archives of Thermodynamics publishes original papers which have not previously appeared in other journals. The journal does not have article processing charges (APCs) nor article submission charges. The language of the papers is English. The authors are responsible to prepare papers with good English. All pages should be numbered.

Paper preparation quidelines

1. The manuscript should be written in very good English, using the two-column format provided in the template.

2. The heading should specify the title (as short as possible), author, his/her complete affiliation, town, zip code, country and e-mail. Please indicate the corresponding author. The heading should be followed by Abstract and Keywords.

3. More important symbols used in the paper should be listed in Nomenclature, placed below Abstract and arranged in a column, e.g.:
u – velocity, m/s
v – specific volume, m/kg etc.

The list should begin with Latin symbols in alphabetical order followed by Greek symbols also in alphabetical order and with a separate heading. Subscripts and superscripts should follow Greek symbols and should be identified with separate headings. Physical quantities should be expressed in SI units ( Système International d’Unités). In the template a dedicated area is created to put the nomenclature.

4. All abbreviations should be spelled out first time they are introduced in the text. Abbreviations should also be listed in the Nomenclature.

5. The equations should be each in a separate line. Standard mathematical notation should be used. All symbols used in equations must be clearly defined. The numbers of equations should run consecutively, irrespective of the division of the paper into sections. The numbers should be given in round brackets on the righthand side of the column.

6. Particular attention should be paid to the differentiation between capital and small letters. If there is a risk of confusion, the symbols should be explained (for example small c) in the margins. Indices of more than one level (such as Bfa) should be avoided wherever possible.

7. Computer-generated figures should be produced using bold lines and characters. No remarks should be written directly on the figures, except numerals or letter symbols only. Figures should be as small as possible while displaying clearly all the information requires, and with all lettering readable. The relevant explanations can be given in the caption.

8. The figures, including photographs, diagrams, etc., should be numbered with Arabic numerals in the same order in which they appear in the text. Each figure should have its own caption explaining the content without reference to the text.

9. The figures should also be submitted as separate graphic files in either vector formats (PostScript (PS), Encapsulated PostScript (EPS), preferable, CorelDraw (CDR), etc.) or bitmap formats (Tagged Image File Format (TIFF), Joint Photographic Experts Group (JPEG), etc.), with the resolution not lower than 300 dpi, preferably 600 dpi. These resolutions refer to images sized at dimensions comparable to those of figures in the print journal. Therefore, electronic figures should be sized to fit on single printed page and can have maximum 120 mm x 170 mm.

10. The references for the paper should be numbered in the order in which they are called in the text. Calling the references is by giving the appropriate numbers in square brackets. The references should be listed with the following information provided: the author’s surname and the initials of his/her names, the complete title of the work (in English translation) and, in addition:

The references should be placed after the acknowledgment section. The references citation in the manuscript body should be numbered: [1], [2], etc. Please use the following style of references in bibliography APA – 7th ed:

Journal citation (APA – 7th ed):
[1] Król, J., & Ocłoń, P. (2019). Sensitivity analysis of hybrid combined heat and power plant on fuel and CO2 emission allowances price change. Energy Conversion and Management, 196, 127–148.
doi.org/10.1016/j.enconman.2019.05.090

[2] Zhou, Y., Bi, H., & Wang, H. (2023). Influence of the primary components of the high-speed train on fire heat release rate. Archives of Thermodynamics, 44(1), 37–61.
doi.org/10.24425/ather.2023.145876

When citing scientific papers, it is needed to provide a DOI identifier if available.
Example of citation:
• Król and Ocłoń [1] studied a hybrid CHP sensitivity on fuel and CO2 emission allowances price change.
• Zhou et al. [2] studied the influence of the primary components of the high speed train on fire heat release rate.

Book citation (APA – 7th ed):
[3] Ocłoń, P. (2021). Renewable energy utilization using underground energy systems (1st ed.). Springer Nature.
Example of citation:
• Ocłoń et al. [3] presented renewable energy systems for heating cooling and electrical energy production in buildings.

Book chapter citation (APA – 7th ed):
[4] Ciałkowski, M., & Frąckowiak, A. (2014). Boundary element method in inverse heat conduction problem. In Encyclopedia of Thermal Stresses (pp. 424–433). Springer Netherlands.
Example of citation:
• Ciałkowski and Frąckowiak [4] presented a Boundary element method application for solving inverse heat conduction problems.

Conference proceedings (APA – 7th ed):
[5] Pourghasemi, B., & Fathi, N. (2023). Validation and verification analyses of turbulent forced convection of Na and NaK in miniature heat sinks. ASME 2023 Verification, Validation, and Uncertainty Quantification Symposium, 17-19 May, Baltimore, USA.
Example of citation:
• Pourghasemi and Fathi [5] validated and verified turbulent forced convection of Na and NaK in miniature heat sinks.
For works originally published in a language other than English, the language should be indicated in parentheses at the end of the reference. Authors are responsible for ensuring that the information in each reference is complete and accurate, including the DOI number.

11. As the papers are published in English, the authors who are not native speakers of English are obliged to have the paper thoroughly reviewed language-wise before submitting for publication. When the Editors or Reviewers assess that the writing English of the manuscript is poor, the authors are obliged to correct it, and provide a Certificate of English Editing as attachment in Editorial System.

Further information

All manuscripts will undergo some editorial modification. The paper proofs (as PDF file) will be sent by e-mail to the corresponding author for acceptance, and should be returned within two weeks of receipt. Within the proofs corrections of minor and typographical errors in: author names, affiliations, articles titles, abstracts and keywords, formulas, symbols, grammatical error, details in figures, etc., are only allowed, as well as necessary small additions. The changes within the text will be accepted in case of serious errors, for example with regard to scientific accuracy, or if authors reputation and that of the journal would be affected. Submitted material will not be returned to the author, unless specifically requested. A PDF file of published paper will be supplied free of charge to the Corresponding Author. Submission of the manuscript expresses at the same time the authors consent to its publishing in both printed and electronic versions.

Transfer of Copyright Agreement

All papers are published under lincense CC BY 4.0. Once a paper has been accepted for publication, as a condition of publication, the authors are asked to send a scanned copy of the signed original of the Transfer of Copyright Agreement, signed by the Corresponding Author on behalf of all authors.

Ta strona wykorzystuje pliki 'cookies'. Więcej informacji