Applied sciences

Archive of Mechanical Engineering

Content

Archive of Mechanical Engineering | 2024 | vol. 71 | No 2

Download PDF Download RIS Download Bibtex

Abstract

The performance of triangular elements satisfying either compatibility or incompatibility conditions in the plate bending analyses is of great importance. To achieve highly accurate responses, four elements are formulated for the structural analysis in this study. All of these elements have thirteen nodes with different degree-of-freedom arrangements. Two of them are displacement-based compatible triangular elements, which are named Karimi Pour Compatible Triangular (KCT) and Noroozinejad Compatible Triangular (NCT) elements. Besides, the other two stress-based incompatible triangular elements are also suggested with the names of Karimi Pour Incompatible Triangular (KIT) and Noroozinejad Incompatible Triangular (NIT) elements. In this study, several benchmark problems are solved by using four proposed elements. These structures were previously analyzed by analytical or numerical schemes. Findings clearly indicated the improvement of answers, when various behaviors of the plate bending structures were studied. Additionally, it is concluded that the solution time is considerably declined if the recommended stress-based elements are utilized.
Go to article

Authors and Affiliations

Arash Karimi Pour
1
ORCID: ORCID
Ehsan Noroozinejad Farsangi
2
ORCID: ORCID

  1. Innovative Structural Engineering and Mechanics Group, Texas, USA
  2. Urban Transformations Research Centre (UTRC), Western Sydney University ( NSW), Australia
Download PDF Download RIS Download Bibtex

Abstract

This study was conducted under the 4R-UAV project. The project is funded by the Latvian Council of Science with the goal of creating an innovative, aerodynamically improved, environmentally friendly, zero waste, and zero emission UAV. For the Circular Aviation 4R (Reduce, Recycle, Reuse, Redesign) concept, this paper covers two Rs (Reduce and Redesign) aspects of the 4R-UAV project. Topology optimization of structures has gained enormous potential with the advances in additive manufacturing techniques. However, it is still challenging when it comes to conventional manufacturing. Aircraft/UAV wings are conventionally hollow structures and leave almost little or no space for further material removal. It becomes even more complicated when conventional manufacturing limitations are further imposed. Nevertheless, topology optimization is indeed an excellent way of reducing the mass of the structures by keeping the mechanical strength intact. This computational study attempts to implement topology optimization on a small-scale aircraft aluminum alloy wing as well as on a carbon composite UAV wing. In order to ensure the feasibility of not only additive manufacturing but also conventional manufacturing, controlled/limited topology optimization was applied only to the ribs of the wings. It was found that topology optimized wing ribs (aluminum and carbon composite) demonstrated a 20% mass reduction while up to 10% overall mass reduction of the wings was achieved. Moreover, after the topology optimization, the wings demonstrated improved mechanical characteristics and factor of safety. The knowledge learned from this study will be implemented for the topology optimization of the future small-scale 4R-UAV wings which will be mainly manufactured using additive manufacturing.
Go to article

Authors and Affiliations

Ali Arshad
1
ORCID: ORCID
Akshay Murali
1
ORCID: ORCID
Toms Kaidalovs
1
ORCID: ORCID
Pavels Gavrilovs
1
ORCID: ORCID

  1. Aeronautics, Space Engineering and Transport Institute, Faculty of Civil and Mechanical Engineering, Riga Technical University, Latvia
Download PDF Download RIS Download Bibtex

Abstract

The present numerical study is concerned with the impact of fin shape design on the thermal efficiency of phase change material (PCM)-based thermal energy storage (TES) unit, assuming the same surface area occupied by fins. Comparison of two different finned TES units equipped with rectangular and triangular fin shapes, respectively, showed significant enhancements in PCM melting activity. Comparative analysis demonstrated that triangular fin shape lowers PCM melting time by 12.64% for equivalent fin numbers, and by 15.38% for equal fin lengths due to the increased heat transfer area provided by the triangular shape. Further examination of fins with triangular shape in terms of spacing and length, under fixed thickness and size parameters, revealed significant reduction in melting time with increasing fins length. Notably, a 50.75% decrease in melting time was achieved by decreasing the number of fins to 20 while increasing fin length to 10 mm. Moreover, maintaining heat transfer fluid (HTF) temperature 20 K higher than the melting PCM temperature maximizes TES thermal efficiency. These outcomes emphasize the importance of optimizing fin shape design for enhancing heat transfer without affecting the energy storage capacity of TES systems, with potential applications in thermal management systems.
Go to article

Authors and Affiliations

Nassira Cheriet
1 3
ORCID: ORCID
Mohamed Lamine Benlekkam
1 2
ORCID: ORCID
Sahraoui Kherris
1 3
ORCID: ORCID

  1. Tissemsilt University, Faculty of Sciences and Technology, Tissemsilt, Algeria
  2. Laboratory of Smart Structure, University of AinTemouchent, AinTemouchent, Algeria
  3. Mechanical Engineering, Materials and Structures Laboratory, Tissemsilt, Algeria
Download PDF Download RIS Download Bibtex

Abstract

The paper presents the results of a simulation on a 3D model of undeformed chips and cutting forces during three-pass gear cutting using the power skiving method. At the level of individual blades and teeth in successive angular cutting positions, the main component of the cutting force and the tangential force on the cutter axis are shown. The analysis of the forces acting on a single gear tooth and the continuous cutting forces allowed the development of a methodology for the selection of rational cutting modes – the value of the axial feed, the number of passes with different cutting depths in order to ensure the minimum time consumption and to achieve the required accuracy of the gears in terms of the parameter of the permissible angular deviation of the profile of the cut gear. It is shown that, provided the required machining accuracy is ensured, higher productivity is achieved by increasing the axial feed at a lower depth of cut and increasing the number of passes, rather than by reducing the feed and increasing the depth of cut.
Go to article

Authors and Affiliations

Ihor Hrytsay
1
ORCID: ORCID
Andrii Slipchuk
1
ORCID: ORCID

  1. Lviv Polytechnic National University, Lviv, Ukraine
Download PDF Download RIS Download Bibtex

Abstract

Development of synthetic bone graft via bone tissue engineering involves seeding of patient’s stem cells onto a porous scaffold in presence of growth factors. Porosity, strength and dimensional accuracy of the porous scaffold play a vital role in this process. This work aims at ascertaining influence of build orientation on porosity, mechanical strength and dimensional accuracy of the selectively laser sintered polyamide porous scaffolds. Initially, CAD models of test specimens with pre-designed porosity were created in Solidworks® software. All the specimens were fabricated on EOSINT P395, a selective laser sintering machine, along various primary (Flat, Edge, Upright and Flat_diag) and secondary (0o, 30o, 45o, 60o and 90o) orientations. Results show that measured porosity of most of the specimens was (range: 42.89-35.26%) less than the designed porosity (41.71%). Maximum average tensile strength (16.84 MPa) was recorded for specimens printed along Flat_0o orientation. Specimens printed along Upright_90o orientation showed highest average compressive strength (8.26 MPa). Specimens printed along Flat orientation showed relatively better average impact strength. Best dimensional accuracy was obtained for specimens printed along Flat orientation.
Go to article

Authors and Affiliations

Falguni Gorana
1
ORCID: ORCID
Yashwant Kumar Modi
1
ORCID: ORCID

  1. Department of Mechanical Engineering, Jaypee University of Engineering and Technology, Guna, MP, India
Download PDF Download RIS Download Bibtex

Abstract

Electrical contacts are used in general electrical applications such as circuit breakers, switches, relays, connectors, etc. Repeated separations of the parts (anode and cathode) of these contacts under input power can damage their contact materials. The objective of this work is to study the influence of the input electric power (100 W and 256 W) and the contact sizes (hemispherical contacts with diameters D=5 mm and D=8 mm) on the variation of the arc energy and the damage of the contact surfaces by oxidization or by erosion. These parameters are decisive for selecting the best arc-resistant contact sample. Experimental results, SEM, and EDX analysis show that high input power leads to more degradation of contact surfaces. Also, the smaller and the larger contact diameters generate similar arcing energies with similar erosion sizes and oxidation rates, but the contact with a small diameter has a higher lifetime (1215 operations) and oxidizes less quickly than the one with a large diameter that has a lower lifetime (374 operations). Experimental and numerical analyses demonstrate that arc mobility is one of several factors influencing the change in contact lifetime.
Go to article

Authors and Affiliations

Kada Hadda
1 2
ORCID: ORCID
Amine Beloufa
1
ORCID: ORCID
Mohamed Amirat
1
ORCID: ORCID
Aissa Boutte
2
ORCID: ORCID

  1. Smart Structure Laboratory, University of Ain Temouchent, Algeria
  2. Algerian Space Agency - Satellite Development Center, Oran, Algeria
Download PDF Download RIS Download Bibtex

Abstract

Micropolar fluid flow through an anisotropic porous medium between two horizontally oriented impermeable plates under the effect of slip conditions for velocity and microrotation vectors at both plates are analysed in this paper. The permeability of an anisotropic porous medium is along two principal axes of permeability K1 and K2. The principal axis with permeability K2 forms an angle ψ with the horizontal direction called anisotropic (or orientation) angle. It is observed that the velocity and the microrotation profiles decrease as permeability ratio K and orientation angle ψ increase. Velocity slip (β1 and β2) parameters show the effect on the velocity profile near upper and lower plates but have a strong influence on the microrotation profile. The spin slip (σ1 and σ2) parameters showed minor enhancement in the velocity profile but had an increasing effect on the microrotation vector. The decrease in permeability ratio and anisotropic angle results in an increase in skin friction. The impact of other parameters like Darcy number Da, micropolar parameter N on velocity and microrotation vectors are presented graphically and discussed. The presence of the slip effect helps to reduce the impact of friction due to plates causing fluid flow to enhance.
Go to article

Authors and Affiliations

Amit Kumar
1
ORCID: ORCID
Krishna Prasad Madasu
1
ORCID: ORCID

  1. National Institute of Technology Raipur, Raipur, India

Instructions for authors

About the Journal
Archive of Mechanical Engineering is an international journal publishing works of wide significance, originality and relevance in most branches of mechanical engineering. The journal is peer-reviewed and is published both in electronic and printed form. Archive of Mechanical Engineering publishes original papers which have not been previously published in other journal, and are not being prepared for publication elsewhere. The publisher will not be held legally responsible should there be any claims for compensation. The journal accepts papers in English.

Archive of Mechanical Engineering is an Open Access journal. The journal does not have article processing charges (APCs) nor article submission charges.

Outline of procedures
  • To ensure that high scientific standards are met, the editorial office of Archive of Mechanical Engineering implements anti-ghost writing and guest authorship policy. Ghostwriting and guest authorship are indication of scientific dishonesty and all cases will be exposed: editorial office will inform adequate institutions (employers, scientific societies, scientific editors associations, etc.).
  • To maintain high quality of published papers, the editorial office of Archive of Mechanical Engineering applies reviewing procedure. Each manuscript undergoes crosscheck plagiarism screening. Each manuscript is reviewed by at least two independent reviewers.
  • Before publication of the paper, authors are obliged to send scanned copies of the signed originals of the declaration concerning ghostwriting, guest authorship and authors contribution and of the Open Access license.
Submission of manuscripts

The manuscripts must be written in one of the following formats:
  • TeX, LaTeX, AMSTeX, AMSLaTeX (recommended),
  • MS Word, either as standard DOCUMENT (.doc, .docx) or RICH TEXT FORMAT (.rtf).
All submissions to the AME should be made electronically via Editorial System – an online submission and peer review system at https://www.editorialsystem.com/ame. First-time users must create an Author’s account to obtain a user ID and password required to enter the system. All manuscripts receive individual identification codes that should be used in any correspondence with regard to the publication process. For the authors already registered in Editorial System it is enough to enter their username and password to log in as an author. The corresponding author should be identified while submitting a paper – personal e-mail address and postal address of the corresponding author are required. Please note that the manuscript should be prepared using our LaTeX or Word template and uploaded as a PDF file.

If you experience difficulties with the manuscript submission website, please contact the Assistant to the Editor of the AME (ame.eo@meil.pw.edu.pl).

All authors of the manuscript are responsible for its content; they must have agreed to its publication and have given the corresponding author the authority to act on their behalf in all matters pertaining to publication. The corresponding author is responsible for informing the co-authors of the manuscript status throughout the submission, review, and production process.

Length and arrangement

Papers (including tables and figures) should not exceed in length 25 pages of size 12.6 cm x 19.5 cm (printing area) with a font size of 11 pt. For manuscript preparation, the Authors should use the templates for Word or LaTeX available at the journal webpage. Please notice that the final layout of the article will be prepared by the journal's technical staff in LaTeX. Articles should be organized into the following sections:
  • List of keywords (separated by commas),
  • Full Name(s) of Author(s), Affiliation(s), Corresponding Author e-mail address,
  • Title,
  • Abstract,
  • Main text,
  • Appendix,
  • Acknowledgments (if applicable),
  • References.
Affiliations should include department, university, city and country. ORCID identifiers of all Authors should be added.
We suggest the title should be as short as possible but still informative.

An abstract should accompany every article. It should be a brief summary of significant results of the paper and give concise information about the content of the core idea of the paper. It should be informative and not only present the general scope of the paper, but also indicate the main results and conclusions. An abstract should not exceed 200 words.

Please follow the general rules for writing the main text of the paper:
  • use simple and declarative sentences, avoid long sentences, in which the meaning may be lost by complicated construction,
  • divide the main text into sections and subsections (if needed the subsections may be divided into paragraphs),
  • be concise, avoid idle words,
  • make your argumentation complete; use commonly understood terms; define all nonstandard symbols and abbreviations when you introduce them;
  • explain all acronyms and abbreviations when they first appear in the text;
  • use all units consistently throughout the article;
  • be self-critical as you review your drafts.
The authors are advised to use the SI system of units.

Artwork/Equations/Tables

You may use line diagrams and photographs to illustrate theses from your text. The figures should be clear, easy to read and of good quality (300 dpi). The figures are preferred in a vector format (bitmap formats are acceptable, but not recommended). The size of the figures should be adequate to their contents. Use 8-9pt font size of the text within the figures.

You should use tables only to improve conciseness or where the information cannot be given satisfactorily in other ways. Tables should be numbered consecutively and referred to within the text by numbers. Each table should have an explanatory caption which should be as concise as possible. The figures and tables should be inserted in the text file, where they are mentioned.

Displayed equations should be numbered consecutively using Arabic numbers in parentheses. They should be centered, leaving a small space above and below to separate it from the surrounding text.

Footnotes/Endnotes/Acknowledgements

We encourage authors to restrict the use of footnotes. Information concerning research grant support should appear in a separate Acknowledgements section at the end of the paper. Acknowledgements of the assistance of colleagues or similar notes of appreciation should also appear in the Acknowledgements section.

References
References should be numbered and listed in the order that they appear in the text. References indicated by numerals in square brackets should complete the paper in the following style:

Books:
[1] R.O. Author. Title of the Book in Italics. Publisher, City, 2018.

Articles in Journals:
[2] D.F. Author, B.D. Second Author, and P.C. Third Author. Title of the article. Full Name of the Journal in Italics, 52(4):89–96, 2017. doi: 1234565/3554. (where means: 52 – volume; 4 – number or issue; 89–96 – pages, and 1234565/3554 – doi number (if exists).)

Theses:
[3] W. Author. Title of the thesis. Ph.D. Thesis, University, City, Country, 2010.

Conference Proceedings:
[4] H. Author. Title of the paper. In Proc. Conference Name in Italics, pages 001–005, Conference Place, 10-15 Jan. 2015. doi: 98765432/7654vd.

English language

Archive of Mechanical Engineering is published in English. Make sure that your manuscript is clearly and grammatically written. The content should be understandable and should not cause any confusion to the readers, including the reviewers. After accepting the manuscript for a publication in the AME, we offer a free language check service, for correcting small language mistakes.

Submission of Revised Articles

When revision of a manuscript is requested, authors are expected to deliver the revised version of the manuscript as soon as possible. The manuscript should be uploaded directly to the Editorial System as an answer to the Editor's decision, and not as a new manuscript. If it is the 1st revision, the authors are expected to return revised manuscript within 60 days; if it is the 2nd revision, the authors are expected to return revised manuscript within 14 days. Additional time for resubmission must be requested in advance. If the above mentioned deadlines are not met, the manuscript may be treated as a new submission.

Outline of the Production Process

Once an article has been accepted for publication, the manuscript is transferred into our production system to be language-edited and formatted. Language/technical editors reserve the privilege of editing manuscripts to conform with the stylistic conventions of the journal. Once the article has been typeset, PDF proofs are generated so that authors can approve all editing and layout.

Proofreading

Proofreading should be carried out once a final draft has been produced. Since the proofreading stage is the last opportunity to correct the article to be published, the authors are requested to make every effort to check for errors in their proofs before the paper is posted online. Authors may be asked to address remarks and queries from the language and/or technical editors. Queries are written only to request necessary information or clarification of an unclear passage. Please note that language/technical editors do not query at every instance where a change has been made. It is the author's responsibility to read the entire text, tables, and figure legends, not just items queried. Major alterations made will always be submitted to the authors for approval. The corresponding author receives e-mail notification when a PDF is available and should return the comments within 3 days of receipt. Comments must be uploaded to Editorial System.

Reviewers


The Editorial Board of the Archive of Mechanical Engineering (AME) sincerely expresses gratitude to the following individuals who devoted their time to review papers submitted to the journal. Particularly, we express our gratitude to those who reviewed papers several times.

List of reviewers in 2023

Sara I. ABDELSALAM – University of California Riverside, United States
M. ARUNA – Liwa College of Technology, United Arab Emirates
Krzysztof BADYDA – Warsaw University of Technology, Poland
Nathalie BÄSCHLIN – Kunstmuseum Bern, Germany
Joanna BIJAK – Silesian University of Technology, Gliwice, Poland
Tomas BODNAR – The Czech Academy of Sciences, Prague, Czech Republic
Dariusz BUTRYMOWICZ – Białystok University of Technology, Poland
Suleyman CAGAN – Mechanical Engineering, Mersin University, Turkey
Claudia CASAPULLA – University of Naples Federico II, Italy
Peng CHEN – Northwestern Polytechnical University, Xi’an, China
Yao CHENG – Southwest Jiaotong University, Chengdu, China
Jan de JONG – University of Twente, Netherlands
Mariusz DEJA – Gdańsk University of Technology, Poland
Jerzy EJSMONT – Gdańsk University of Technology, Poland
İsmail ESEN – Karabuk University, Turkey
Pedro Javier GAMEZ-MONTERO – Universitat Politecnica de Catalunya, Spain
Aman GARG – National Institute of Technology, Kurukshetra, India
Michał HAĆ – Warsaw University of Technology, Poland
Satoshi ISHIKAWA – Kyushu University, Japan
Jacek JACKIEWICZ – Kazimierz Wielki University, Bydgoszcz, Poland
Krzysztof JAMROZIAK – Wrocław University of Technology, Poland
Hong-Lae JANG – Changwon National University, Korea (South)
Łukasz JANKOWSKI – Institute of Fluid-Flow Machinery, PAS, Gdansk, Poland
Albizuri JOSEBA – University of the Basque Country, Spain
Łukasz KAPUSTA – Warsaw University of Technology, Poland
Dariusz KARDAŚ – Institute of Fluid-Flow Machinery, PAS, Gdansk, Poland
Panagiotis KARMIRIS-OBRATAŃSKI – AGH University of Science and Technology, Cracow, Poland
Sivakumar KARTHIKEYAN – SRM Nagar
Tarek KHELFA – Hunan University of Humanities Science and Technology, China
Sven-Joachim KIMMERLE – Universität der Bundeswehr München, Germany
Thomas KLETSCHKOWSKI – HAW Hamburg, Germany
Piotr KLONOWICZ – Institute of Fluid-Flow Machinery, PAS, Gdansk, Poland
Vladis KOSSE – Queensland University of Technology, Australia
Mariusz KOSTRZEWSKI – Warsaw University of Technology, Poland
Maria KOTELKO – Lodz University of Technology, Poland
Michał KOWALIK – Warsaw University of Technology, Poland
Zbigniew KRZEMIANOWSKI – Institute of Fluid-Flow Machinery, Gdańsk, Poland
Slawomir KUBACKI – Warsaw University of Technology, Poland
Mieczysław KUCZMA – Poznan University of Technology, Poland
Waldemar KUCZYŃSKI – The Koszalin University of Technology, Poland
Rafał KUDELSKI – AGH University of Science and Technology, Cracow, Poland
Rajesh KUMAR – Sant Longowal Institute of Engineering and Technology, India
Mustafa KUNTOĞLU – Selcuk University, Turkey
Anna LEE – Pohang University of Science and Technology, South Korea, Korea (South)
Guolong LI – Chongqing University, China
Luxian LI – Xi'an Jiaotong University, China
Yingchao LI – Ludong University, Yantai, China
Xiaochuan LIN – Nanjing Tech University, China
Zhihong LIN – HuaQiao University, China
Yakun LIU – Massachusetts Institute of Technology, United States
Jinjun LU – Northwest University, Xiʼan, China
Paweł MACIĄG – Warsaw University of Technology, Poland
Paweł MALCZYK – Warsaw University of Technology, Poland
Emil MANOACH – Bulgarian Academy of Sciences, Sofia, Bulgaria
Mihaela MARIN – “Dunărea de Jos” University of Galati, Romania
Miloš MATEJIĆ – University of Kragujevac, Serbia
Krzysztof MIANOWSKI – Warsaw University of Technology, Poland
Tran MINH TU – Hanoi University of Civil Engineering, Viet Nam
Farhad Sadegh MOGHANLOU – University of Mohaghegh Ardabili, Ardabil, Iran
Mohsen MOTAMEDI – University of Isfahan, Iran
Adis MUMINOVIC – University of Sarajevo, Bosnia and Herzegovina
Mohamed NASR – National Research Centre, Giza, Egypt
Huu-That NGUYEN – Nha Trang University, Viet Nam
Tan-Luy NGUYEN – Ho Chi Minh City University of Technology, Viet Nam
Viorel PALEU – Gheorghe Asachi Technical University of Iasi, Romania
Nicolae PANC – Technical University of Cluj-Napoca, Romania
Marcin PĘKAL – Warsaw University of Technology, Poland
Van Vinh PHAM – Le Quy Don Technical University, Hanoi, Viet Nam
Vaclav PISTEK – Brno University of Technology, Czech Republic
Paweł PYRZANOWSKI – Warsaw University of Technology, Poland
Lei QIN – Beijing Information Science & Technology University, China
Milan RACKOV – University of Novi Sad, Serbia
Yuriy ROMASEVYCH – National University of Life and Environmental Sciences of Ukraine, Kiev, Ukraine
Artur RUSOWICZ – Warsaw University of Technology, Poland
Andrzej SACHAJDAK – Silesian University of Technology, Gliwice, Poland
Mirosław SEREDYŃSKI – Warsaw University of Technology, Poland
Maciej SUŁOWICZ – Cracow University of Technology, Poland
Biswajit SWAIN – National Institute of Technology, Rourkela, India
Tadeusz SZYMCZAK – Motor Transport Institute, Warsaw, Poland
Reza TAHERDANGKOO – Institute of Geotechnics, Freiberg, Germany
Rulong TAN – Chongqing University of Technology, China
Daniel TOBOŁA – Łukasiewicz Research Network - Cracow Institute of Technology, Poland
Milan TRIFUNOVIĆ – University of Niš, Serbia
Duong VU – Duy Tan University, Viet Nam
Shaoke WAN – Xi’an Jiaotong University, China
Dong WEI – Northwest A&F University, Yangling , China
Marek WOJTYRA – Warsaw University of Technology, Poland
Mateusz WRZOCHAL – Kielce University of Technology, Poland
Hugo YAÑEZ-BADILLO – TecNM: Tecnológico de Estudios Superiores de Tianguistenco, Mexico
Guichao YANG – Nanjing Tech University, China
Xiao YANG – Chongqing Technology and Business University, China
Yusuf Furkan YAPAN – Yildiz Technical University, Turkey
Luhe ZHANG – Chongqing University, China
Xiuli ZHANG – Shandong University of Technology, Zibo, China

List of reviewers in 2022
Isam Tareq ABDULLAH – Middle Technical University, Baghdad, Iraq
Ahmed AKBAR – University of Technology, Iraq
Nandalur AMER AHAMMAD – University of Tabuk, Saudi Arabia
Ali ARSHAD – Riga Technical University, Latvia
Ihsan A. BAQER – University of Technology, Iraq
Thomas BAR – Daimler AG, Stuttgart, Germany
Huang BIN – Zhejiang University, Zhoushan, China
Zbigniew BULIŃSKI – Silesian University of Technology, Poland
Onur ÇAVUSOGLU – Gazi University, Turkey
Ali J CHAMKHA – Duy Tan University, Da Nang , Vietnam
Dexiong CHEN – Putian University, China
Xiaoquan CHENG – Beihang University, Beijing, China
Piotr CYKLIS – Cracow University of Technology, Poland
Agnieszka DĄBSKA – Warsaw University of Technology, Poland
Raphael DEIMEL – Berlin University of Technology, Germany
Zhe DING – Wuhan University of Science and Technology, China
Anselmo DINIZ – University of Campinas, São Paulo, Brazil
Paweł FLASZYŃSKI – Institute of Fluid-Flow Machinery, Gdańsk, Poland
Jerzy FLOYRAN – University of Western Ontario, London, Canada
Xiuli FU – University of Jinan, China
Piotr FURMAŃSKI – Warsaw University of Technology, Poland
Artur GANCZARSKI – Cracow University of Technology, Poland
Ahmad Reza GHASEMI– University of Kashan, Iran
P.M. GOPAL – Anna University, Regional Campus Coimbatore, India
Michał GUMNIAK – Poznan University of Technology, Poland
Bali GUPTA – Jaypee University of Engineering and Technology, India
Dmitriy GVOZDYAKOV – Tomsk Polytechnic University, Russia
Jianyou HAN – University of Science and Technology, Beijing, China
Tomasz HANISZEWSKI – Silesian University of Technology, Poland
Juipin HUNG – National Chin-Yi University of Technology, Taichung, Taiwan
T. JAAGADEESHA – National Institute of Technology, Calicut, India
Jacek JACKIEWICZ – Kazimierz Wielki University, Bydgoszcz, Poland
JC JI – University of Technology, Sydney, Australia
Feng JIAO – Henan Polytechnic University, Jiaozuo, China
Daria JÓŹWIAK-NIEDŹWIEDZKA – Institute of Fundamental Technological Research, Warsaw, Poland
Rongjie KANG – Tianjin University, China
Dariusz KARDAŚ – Institute of Fluid-Flow Machinery, Gdansk, Poland
Leif KARI – KTH Royal Institute of Technology, Sweden
Daria KHANUKAEVA – Gubkin Russian State University of Oil and Gas, Russia
Sven-Joachim KIMMERLE – Universität der Bundeswehr München, Germany
Yeong-Jin KING – Universiti Tunku Abdul Rahman, Malaysia
Kaushal KISHORE – Tata Steel Limited, Jamshedpur, India
Nataliya KIZILOVA – Warsaw University of Technology, Poland
Adam KLIMANEK – Silesian University of Technology, Poland
Vladis KOSSE – Queensland University of Technology, Australia
Maria KOTEŁKO – Lodz University of Technology, Poland
Roman KRÓL – Kazimierz Pulaski University of Technology and Humanities in Radom, Poland
Krzysztof KUBRYŃSKI – Airforce Institute of Technology, Warsaw, Poland
Mieczysław KUCZMA – Poznan University of Technology, Poland
Paweł KWIATOŃ – Czestochowa University of Technology, Poland
Lihui Lang – Beihang University, China
Rafał LASKOWSKI – Warsaw University of Technology, Poland
Guolong Li – Chongqing University, China
Leo Gu LI – Guangzhou University, China
Pengnan LI – Hunan University of Science and Technology, China
Nan LIANG – University of Toronto, Mississauga, Canada
Michał LIBERA – Poznan University of Technology, Poland
Wen-Yi LIN – Hungkuo Delin University of Technology, Taiwan
Wojciech LIPINSKI – Austrialian National University, Canberra, Australia
Linas LITVINAS – Vilnius University, Lithuania
Paweł MACIĄG – Warsaw University of Technology, Poland
Krishna Prasad MADASU – National Institute of Technology Raipur, Chhattisgarh, India
Trent MAKI – Amino North America Corporation, Canada
Marco MANCINI – Institut für Energieverfahrenstechnik und Brennstofftechnik, Germany
Piotr MAREK – Warsaw University of Technology, Poland
Miloš MATEJIĆ – University of Kragujevac, Serbia
Phani Kumar MEDURI – VIT-AP University, Amaravati, India
Fei MENG – University of Shanghai for Science and Technology, China
Saleh MOBAYEN – University of Zanjan, Iran
Vedran MRZLJAK – Rijeka University, Croatia
Adis MUMINOVIC – University of Sarajevo, Bosnia and Herzegovina
Mohamed Fawzy NASR – National Research Centre, Giza, Egypt
Paweł OCŁOŃ – Cracow University of Technology, Poland
Yusuf Aytaç ONUR – Zonguldak Bulent Ecevit University, Turkey
Grzegorz ORZECHOWSKI – LUT University, Lappeenranta, Finland
Halil ÖZER – Yıldız Technical University, Turkey
Muthuswamy PADMAKUMAR – Technology Centre Kennametal India Ltd., Bangalore, India
Viorel PALEU – Gheorghe Asachi Technical University of Iasi, Romania
Andrzej PANAS – Warsaw Military Academy, Poland
Carmine Maria PAPPALARDO – University of Salerno, Italy
Paweł PARULSKI – Poznan University of Technology, Poland
Antonio PICCININNI – Politecnico di Bari, Italy
Janusz PIECHNA – Warsaw University of Technology, Poland
Vaclav PISTEK – Brno University of Technology, Czech Republic
Grzegorz PRZYBYŁA – Silesian University of Technology, Poland
Paweł PYRZANOWSKI – Warsaw University of Technology, Poland
K.P. RAJURKARB – University of Nebraska-Lincoln, United States
Michał REJDAK – Institute of Chemical Processing of Coal, Zabrze, Poland
Krzysztof ROGOWSKI – Warsaw University of Technology, Poland
Juan RUBIO – University of Minas Gerais, Belo Horizonte, Brazil
Artur RUSOWICZ – Warsaw University of Technology, Poland
Wagner Figueiredo SACCO – Universidade Federal Fluminense, Petropolis, Brazil
Andrzej SACHAJDAK – Silesian University of Technology, Poland
Bikash SARKAR – NIT Meghalaya, Shillong, India
Bozidar SARLER – University of Lubljana, Slovenia
Veerendra SINGH – TATA STEEL, India
Wieńczysław STALEWSKI – Institute of Aviation, Warsaw, Poland
Cyprian SUCHOCKI – Institute of Fundamental Technological Research, Warsaw, Poland
Maciej SUŁOWICZ – Cracov University of Technology, Poland
Wojciech SUMELKA – Poznan University of Technology, Poland
Tomasz SZOLC – Institute of Fundamental Technological Research, Warsaw, Poland
Oskar SZULC – Institute of Fluid-Flow Machinery, Gdansk, Poland
Rafał ŚWIERCZ – Warsaw University of Technology, Poland
Raquel TABOADA VAZQUEZ – University of Coruña, Spain
Halit TURKMEN – Istanbul Technical University, Turkey
Daniel UGURU-OKORIE – Federal University, Oye Ekiti, Nigeria
Alper UYSAL – Yildiz Technical University, Turkey
Yeqin WANG – Syndem LLC, United States
Xiaoqiong WEN – Dalian University of Technology, China
Szymon WOJCIECHOWSKI – Poznan University of Technology, Poland
Marek WOJTYRA – Warsaw University of Technology, Poland
Guenter WOZNIAK – Technische Universität Chemnitz, Germany
Guanlun WU – Shanghai Jiao Tong University, China
Xiangyu WU – University of California at Berkeley, United States
Guang XIA – Hefei University of Technology, China
Jiawei XIANG – Wenzhou University, China
Jinyang XU – Shanghai Jiao Tong University,China
Jianwei YANG – Beijing University of Civil Engineering and Architecture, China
Xiao YANG – Chongqing Technology and Business University, China
Oguzhan YILMAZ – Gazi University, Turkey
Aznifa Mahyam ZAHARUDIN – Universiti Teknologi MARA, Shah Alam, Malaysia
Zdzislaw ZATORSKI – Polish Naval Academy, Gdynia, Poland
S.H. ZHANG – Institute of Metal Research, Chinese Academy of Sciences, China
Yu ZHANG – Shenyang Jianzhu University, China
Shun-Peng ZHU – University of Electronic Science and Technology of China, Chengdu, China
Yongsheng ZHU – Xi’an Jiaotong University, China

List of reviewers of volume 68 (2021)
Ahmad ABDALLA – Huaiyin Institute of Technology, China
Sara ABDELSALAM – University of California, Riverside, United States
Muhammad Ilman Hakimi Chua ABDULLAH – Universiti Teknikal Malaysia Melaka, Malaysia
Hafiz Malik Naqash AFZAL – University of New South Wales, Sydney, Australia
Reza ANSARI – University of Guilan, Rasht, Iran
Jeewan C. ATWAL – Indian Institute of Technology Delhi, New Delhi, India
Hadi BABAEI – Islamic Azad University, Tehran, Iran
Sakthi BALAN – K. Ramakrishnan college of Engineering, Trichy, India
Leszek BARANOWSKI – Military University of Technology, Warsaw, Poland
Elias BRASSITOS – Lebanese American University, Byblos, Lebanon
Tadeusz BURCZYŃSKI – Institute of Fundamental Technological Research, Warsaw, Poland
Nguyen Duy CHINH – Hung Yen University of Technology and Education, Hung Yen, Vietnam
Dorota CHWIEDUK – Warsaw University of Technology, Poland
Adam CISZKIEWICZ – Cracow University of Technology, Poland
Meera CS – University of Petroleum and Energy Studies, Duhradun, India
Piotr CYKLIS – Cracow University of Technology, Poland
Abanti DATTA – Indian Institute of Engineering Science and Technology, Shibpur, India
Piotr DEUSZKIEWICZ – Warsaw University of Technology, Poland
Dinesh DHANDE – AISSMS College of Engineering, Pune, India
Sufen DONG – Dalian University of Technology, China
N. Godwin Raja EBENEZER – Loyola-ICAM College of Engineering and Technology, Chennai, India
Halina EGNER – Cracow University of Technology, Poland
Fehim FINDIK – Sakarya University of Applied Sciences, Turkey
Artur GANCZARSKI – Cracow University of Technology, Poland
Peng GAO – Northeastern University, Shenyang, China
Rafał GOŁĘBSKI – Czestochowa University of Technology, Poland
Andrzej GRZEBIELEC – Warsaw University of Technology, Poland
Ngoc San HA – Curtin University, Perth, Australia
Mehmet HASKUL – University of Sirnak, Turkey
Michal HATALA – Technical University of Košice, Slovak Republic
Dewey HODGES – Georgia Institute of Technology, Atlanta, United States
Hamed HONARI – Johns Hopkins University, Baltimore, United States
Olga IWASINSKA – Warsaw University of Technology, Poland
Emmanuelle JACQUET – University of Franche-Comté, Besançon, France
Maciej JAWORSKI – Warsaw University of Technology, Poland
Xiaoling JIN – Zhejiang University, Hangzhou, China
Halil Burak KAYBAL – Amasya University, Turkey
Vladis KOSSE – Queensland University of Technology, Brisbane, Australia
Krzysztof KUBRYŃSKI – Air Force Institute of Technology, Warsaw, Poland
Waldemar KUCZYŃSKI – Koszalin University of Technology, Poland
Igor KURYTNIK – State Higher School in Oswiecim, Poland
Daniel LESNIC – University of Leeds, United Kingdom
Witold LEWANDOWSKI – Gdańsk University of Technology, Poland
Guolu LI – Hebei University of Technology, Tianjin, China
Jun LI – Xi’an Jiaotong University, China
Baiquan LIN – China University of Mining and Technology, Xuzhou, China
Dawei LIU – Yanshan University, Qinhuangdao, China
Luis Norberto LÓPEZ DE LACALLE – University of the Basque Country, Bilbao, Spain
Ming LUO – Northwestern Polytechnical University, Xi’an, China
Xin MA – Shandong University, Jinan, China
Najmuldeen Yousif MAHMOOD – University of Technology, Baghdad, Iraq
Arun Kumar MAJUMDER – Indian Institute of Technology, Kharagpur, India
Paweł MALCZYK – Warsaw University of Technology, Poland
Miloš MATEJIĆ – University of Kragujevac, Serbia
Norkhairunnisa MAZLAN – Universiti Putra Malaysia, Serdang, Malaysia
Dariusz MAZURKIEWICZ – Lublin University of Technology, Poland
Florin MINGIREANU – Romanian Space Agency, Bucharest, Romania
Vladimir MITYUSHEV – Pedagogical University of Cracow, Poland
Adis MUMINOVIC – University of Sarajevo, Bosnia and Herzegovina
Baraka Olivier MUSHAGE – Université Libre des Pays des Grands Lacs, Goma, Congo (DRC)
Tomasz MUSZYŃSKI – Gdansk University of Technology, Poland
Mohamed NASR – National Research Centre, Giza, Egypt
Driss NEHARI – University of Ain Temouchent, Algeria
Oleksii NOSKO – Bialystok University of Technology, Poland
Grzegorz NOWAK – Silesian University of Technology, Gliwice, Poland
Iwona NOWAK – Silesian University of Technology, Gliwice, Poland
Samy ORABY – Pharos University in Alexandria, Egypt
Marcin PĘKAL – Warsaw University of Technology, Poland
Bo PENG – University of Huddersfield, United Kingdom
Janusz PIECHNA – Warsaw University of Technology, Poland
Maciej PIKULIŃSKI – Warsaw University of Technology, Poland
T.V.V.L.N. RAO – The LNM Institute of Information Technology, Jaipur, India
Andrzej RUSIN – Silesian University of Technology, Gliwice, Poland
Artur RUSOWICZ – Warsaw University of Technology, Poland
Benjamin SCHLEICH – Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany
Jerzy SĘK – Lodz University of Technology, Poland
Reza SERAJIAN – University of California, Merced, USA
Artem SHAKLEIN – Udmurt Federal Research Center, Izhevsk, Russia
G.L. SHI – Guangxi University of Science and Technology, Liuzhou, China
Muhammad Faheem SIDDIQUI – Vrije University, Brussels, Belgium
Jarosław SMOCZEK – AGH University of Science and Technology, Cracow, Poland
Josip STJEPANDIC – PROSTEP AG, Darmstadt, Germany
Pavel A. STRIZHAK – Tomsk Polytechnic University, Russia
Vadym STUPNYTSKYY – Lviv Polytechnic National University, Ukraine
Miklós SZAKÁLL – Johannes Gutenberg-Universität Mainz, Germany
Agnieszka TOMASZEWSKA – Gdansk University of Technology, Poland
Artur TYLISZCZAK – Czestochowa University of Technology, Poland
Aneta USTRZYCKA – Institute of Fundamental Technological Research, Warsaw, Poland
Alper UYSAL – Yildiz Technical University, Turkey
Gabriel WĘCEL – Silesian University of Technology, Gliwice, Poland
Marek WĘGLOWSKI – Welding Institute, Gliwice, Poland
Frank WILL – Technische Universität Dresden, Germany
Michał WODTKE – Gdańsk University of Technology, Poland
Marek WOJTYRA – Warsaw University of Technology, Poland
Włodzimierz WRÓBLEWSKI – Silesian University of Technology, Gliwice, Poland
Hongtao WU – Nanjing University of Aeronautics and Astronautics, China
Jinyang XU – Shanghai Jiao Tong University, China
Zhiwu XU – Harbin Institute of Technology, China
Zbigniew ZAPAŁOWICZ – West Pomeranian University of Technology, Szczecin, Poland
Zdzislaw ZATORSKI – Polish Naval Academy, Gdynia, Poland
Wanming ZHAI – Southwest Jiaotong University, Chengdu, China
Xin ZHANG – Wenzhou University of Technology, China
Su ZHAO – Ningbo Institute of Materials Technology and Engineering, China



This page uses 'cookies'. Learn more