Woda to zadziwiająca substancja, której wyjątkowe właściwości determinują warunki na naszej planecie i powodują, że życie w takiej formie, jaką znamy, może istnieć. Czy woda jest obojętna? Odpowiedź nie jest oczywista i zależy od kontekstu pytania. Tak, nie, czasem...

Until now, dust arising from lime manufacture has been considered harmless to the environment so it has been investigated marginally from the standpoint of environmental protection, especially when it came to magnetic properties and heavy metal content. The aim of the research was filling the gap in this area. The research comprised measurements of magnetic susceptibility, the content of heavy metals, reaction (pH) and specific conductivity of lime dust and also raw material and fuel used for lime production. The samples were taken from one of the lime plants located in Opole Province. Similar investigations were also performed for dust taken from the nearby cement plant using dry method of cement production. It was proven that magnetic susceptibility, heavy metal content and conductivity of lime dust was lower in comparison to cement dust, which resulted from the fact that the lime plant used neither low raw materials nor additives. Due to the high atmosphere dust level in the vicinity of the investigated plants, extremely basic reaction of the tested dust and high content of metals, the studied dust cause alkalization of soils and contribute to the increase of heavy metal content in soils, posing a threat to the environment.

This paper presents initial findings from research into the possibility of using gypsum binders in quartz moulding sand that could be used in the production of casting moulds and cores. For the purposes of the research two commercial types of gypsum were used as binders: building gypsum and gypsum putty. Dry components of moulding sand i.e. medium quartz sand and gypsum were mixed in proportion of 89/11 parts by weight. In order to achieve bonding properties for the binders, 5 parts by weight of water was added to the mixture of dry components. After 24 hours of adding water and mixing all the components, the moulding sand, naturally hardened, was subjected to high temperature. The moulding sand thus produced, i.e. with cheap and environmentally-friendly gypsum binders, was eventually analysed after heating (at temperatures of 300oC, 650oC and 950oC) and cooling in order to determine changes in the following parameters: LOI – loss on ignition, chemical composition and pH. Moreover, investigated were bonding bridges, before and after the moulding sand was roasted. The research results revealed differences in the structure of bonding bridges and the occurrence of automatic adhesive destruction for both types of gypsum binders. For two types of moulding sands under the investigation of the LOI exceeded 2.59wt.% (with building gypsum) or 2.84wt.% (with putty gypsum) and pH increased to ca. 12 as a result of increasing roasting temperature from 300oC to 650oC. Next, roasting at 950oC decrease value of LOI in both types of moulding sands. Moulding sand with builoding gypsum roasted at 950oC revealed a return to the value of pH parameter measured prior to annealing.

Casting covers major area of production all over the world. Resin bonded casting is widely used in today’s manufacturing industries. Furan

No bake casting is most widely accepted in indian foundries due to its excellent surface finish and dimensional stability. It is a self-setting

binder and it has a lower work and strip times. Though the casting process is also known as process of uncertainty, in the present study, an

attempt has been made to investigate the effect of Grain Fineness Number, Loss of Ignition, Potential of Hydrogen, % of Resin with

respect to sand, Sand Temperature and Compressive strength of the mould on Sand Inclusion defect – one of the most dominating defect in

the Krislur Castomech Pvt. Ltd. Industry situated at Bhavnagar, Gujarat, India. The experiments were conducted based on response surface

methodology (RSM) and sequential approach using face centered central composite design. The results show that quadratic model with

removal of some insignificant term is comparatively best fits for Sand Inclusion Defect.

This study presents the spatial variability and dynamics of soil organic carbon (SOC), soil organic matter (SOM) and soil pH contents at the Wonji Shoa Sugar Estate (WSSE), Ethiopia. Soil samples were collected immediately after the sug-arcane was harvested and then analysed for SOC, SOM and pH content using standard procedures. The analysis resultsshowed that the pH value varied between 6.7–8.4 (neutral to moderately alkaline) and 7.3–8.5 (neutral to strongly alkaline) for the top and bottom soil profiles, respectively. The SOM content is in the range of 1.1–6.7% and 0.74–3.3% for the upper and lower soil layers, respectively. Nearly 45% of the samples demonstrated a SOM content below the desirable threshold (<2.1%) in the bottom layer and, hence, inadequate. Moreover, most of the topsoil layer (95%) has an SOM content exceed-ing the desirable limit and hence is categorized within the normal range. Interestingly, the SOC content showed a spatial variability in both the surface and sub-surface soil layers. A lower SOC and SOM content was found for the sub-soil in the south and southwestern part of the plantation. A further decline in the SOC and SOM content may face the estate if the cur-rent waterlogging condition continues in the future for a long period. Overall, the study result emphasizes the need to min-imize the pre-harvest burning of sugarcane and action is needed to change the irrigation method to green harvesting to fa-cilitate the SOC retention in the soil and minimize the greenhouse emission effect on the environment, hence improving soil quality in the long-term.

Exogenous fibrolytic enzymes (EFE) and yeast are feed supplements that improve forage digestion in rumen, but their influences on physical reticulorumen parameters are not well studied. This study was designed to evaluate the effect of the EFE:endo-β-xylanase (37x104 U/cow/day), endocellulase (45x104 U/cow/day), endo-β-glucanase (12x104U/cow/day), and active yeast – Saccharomyces cerevisiae CNCM-1077 (10x109CFU/cow/day) supplements on reticulorumen pH (RpH) and temperature (RT) in dairy cows. Nine Lithuanian Red cows were allocated into three groups (3 cows/group): control group (C) – farm diet without supplementa- tion, enzyme group (E) – farm diet supplemented with EFE, enzyme and active yeast group (EY) – farm diet supplemented with EFE and active yeast. The feeding trial lasted for 60 d. All cows were equipped with reticuloruminal telemetric pH and temperature sensor device. Data provided by the device were used to calculate the mean RpH (RpH/24h), the mean minimal RpH ( RpH/24h min.) and mean of the time that RpH was below the threshold value of 6.0 (RpH<6.0/24h, min.). The highest RpH/24h (6.37±0.22) was observed in group EY and it was by 1.62% (p<0.05) and 1.27% (p<0.001) higher as compared with groups E and C, respectively. Also min RpH/24h (6.24±0.24) was highest in group EY and values were by 0.63% (p<0.001) and 0.65% (p<0.001) higher as compared with groups C and E, respectively.

The shortest duration of RpH<6.0/24h, was recorded in group EY, and it was by 57.76% (p<0.05) and 47.87% shorter as compared with groups C and E, respectively. In conclusion, feed supple- mentation with EFE and Saccharomyces cerevisiae CNCM-1077 had beneficial effect on RpH.

The presence of lipopolysaccharide (LPS) in blood induces an inflammatory response which leads to multiple organ dysfunction and numerous metabolic disorders. Uncontrolled, improper or late intervention may lead to tissue hypoxia, anaerobic glycolysis and a disturbance in the acid -base balance. The effects of LPS-induced toxemia on biological and immunological markers were well studied. However, parameters such as base excess, ions, and acid-base balance were not fully investigated. Therefore, the objective of this study was to examine these blood parameters collectively in LPS-induced inflammatory toxemia in rat’s model. After induction of toxemia by injecting LPS at a rate of 5 mg/kg body weight intravenously, blood was collected from the tail vein of twenty rats and immediately analyzed. After 24 hours, the animals were sacrificed and the blood was collected from the caudal vena cava. The results revealed that the levels of pH, bicarbonate, partial pressure of oxygen, oxygen saturation, Alveolar oxygen, hemoglobin, hematocrit, magnesium (Mg2+), and calcium (Ca2+) were significantly decreased. On the other side, the levels of Base excess blood, Base excess extracellular fluid, partial pressure of carbon dioxide, lactate, Ca2+/Mg2+, potassium, and chloride were significantly increased compared to those found pre toxemia induction. However, sodium level showed no significant change. In conclusion, Acute LPS-toxemia model disturbs acid-base balance, blood gases, and ions. These parameters can be used to monitor human and animal toxemic inflammatory response induced by bacterial LPS conditions to assist in the management of the diagnosed cases.

In this research different methods for measuring water quality indices were conducted to investigate the performance of the newly designed, constructed and operated 9-Nissan water treatment plant, Iraq. Data gathering and implementation took place throughout winter and summer. Water samples were taken periodically, according to the standard method, the re-search was carried out by collecting different random samples for eight months (Jun. 2015–Jan. 2016) and measuring (tur-bidity, total hardness, pH, total dissolved solids, suspended solids, Cl–, Mg2+, Fe2+,NO3–, NH3+) for each sample. Five dif-ferent approaches and methodologies of calculating the water index were applied. The results revealed that the Water Qual-ity Indices varied from 70.55 to 88.24, when applying Canadian Council of Ministers of the Environment Water Quality Index (CCMEWQI) and British Columbia water quality index (BCWQI) geometric weighted mean respectively. All the results, from the five approaches indicated good water quality, multiple regression analyses were conducted for turbidity, total hardness and suspended solids, they found that these parameters are strongly related to each other and to other pa-rameters.