Polycrystalline samples BaTiO3 and the solid solutions Ba0.9Sr0.1TiO3, Ba0.9Sr0.1Ti0.9Sn0.1O3, Ba0.9Sr0.1Ti0.8Sn0.2O3 were obtained by means of a mechanochemical treatment based on the high-energy ball milling technique and next a high temperature solid state reaction method. The influence of synthesis condition on microstructural, dielectric and ferroelectric properties of obtained solid solutions were investigated. The structure and morphology of the investigated samples were characterized by an X-ray diffraction (XRD) and scanning electron microscopy (SEM). The characterization of electrical properties of the ceramics within the temperature range from –130°C to 250°C were performed by means of a dielectric spectroscopy method at the frequency ranging from 0.1 Hz to 10 MHz. The diffusion of the paraelectric – ferroelectric phase transition and dielectric relaxation for ceramic samples are described.

In the presented work, the conditions of the high-temperature and mechanochemical method for the synthesis of compound Sm ₅VO ₁₀ and their influence on its physicochemical properties were studied. The following methods were used for the study: X-ray powder diffraction (XRD), differential thermal analysis (DTA), infrared spectroscopy (FTIR), ultraviolet and visible light spectroscopy (UV–VIS–DRS), scanning electron microscopy (SEM-EDX), and laser beam diffraction spectrometry (LDS). Based on the results, it was determined that the compound Sm ₅VO ₁₀ is thermally stable in air atmospheres up to 1475 °C, crystallises in a monoclinic system, and its structure is made up of oxygen VO ₄ and SmO ₈ polyhedra. The estimated energy gap value for nanometric, mechanochemically obtained Sm ₅VO ₁₀ was about 3.20 eV, and for the microcrystalline, obtained with the high-temperature method, was about 2.75 eV. The established physicochemical characterisation of Sm ₅VO ₁₀ initially showed that the compound could find potential applications, e.g. as a photocatalyst for water purification or as a component of new optoelectronic materials.

In the present study, the lead-free BaTi1-xZrxO3 (for x = 0, 0.05 and 0.15) ceramics were prepared by High-Energy Ball Milling and heat treatments. The performed X-ray, SEM and EDS measurements confirmed high purity, good quality and the expected quantitative composition of the obtained samples. The study of dielectric properties was performed by means of broadband dielectric spectroscopy at the frequency ranging from 0.1 Hz to 10 MHz. The obtained measurement data, analyzed in accordance with the Arrhenius formalism demonstrated the presence of relaxation type dielectric mechanisms. The impedance answer of studied ceramic materials indicated the presence of two relaxation processes: one with a dominant resistive component and the other with a small capacitive component. The observed dielectric relaxation process is temperature dependent and has a “non-Debye” character.