We discuss waste, fuels, and air quality with Prof. Czesława Rosik-Dulewska from the PAS Institute of Environmental Engineering and the Department of Land Protection at the University of Opole.

Multidisciplinary research was carried on in 1978/79 in the region of Admiralty Bay and Arctowski Station. This area is representative of the near-shore Antarctic ecosystem. It is characterized by a number of local traits such as climate, ice conditions, hydrology, hydrochemistry and hydrodynamics. Estimates were made of primary production and abundance of zooplankton in Admiralty Bay and of the biomass and quantity of food taken by avi-fauna and pinnipeds. Main routes and directions of transport of mineral and organic matter are shown; some of them have been estimated quantitatively. A continuous inflow of organic matter from Bransfield Strait is necessary for the summer functionning of Admiralty Bay.

New Year’s Eve is an example of a situation in which urban residents are exposed to an almost continuous and increased noise level from the impulsive sounds sources – fireworks. This custom has become a source of many controversies related to the protection of human and animal health or environmental pollution. However, current legal regulations only slightly affect the subject of noise of fireworks and its harmfulness. Currently, it does not seem possible to completely prohibit the use of fireworks in urban areas, but this does not mean that it is not possible to decrease the degree of their annoyance.

The paper consists the issues of identification, analysis and assessment of impulsive noise of fireworks and acoustic climate during New Year’s Eve. Material presented refers to measurements of time series, frequency spectrum and values of noise parameters of selected fireworks. It was presented, among others, that the measured values exceed the criteria for occupational noise (LCpeak), due to the direct hazard of hearing loss, from 1.8 dB at a distance of 25 m and 6.2 dB at a distance of 15 m. Also this work discusses results of impulsive noise measurements of fireworks recorded during New Year’s Eve in years 2016–2017. Material refers to measurements at three measurement points spread over the city of Kraków. Obtained results were compared with typical noise levels for night time in urban area, indicating also the main sources of annoyance and hazard from this type of noise.

The cumulative results of investigations of the possibility of using the reclaimed materials after the mechanical, thermal or

mechanical-thermal reclamation for making cores by means of the blowing method in the alkaline CO2 technology, are

presented in the paper. Three kinds of spent sands: with furfuryl resin, bentonite and alkaline phenolic resin, obtained from

the foundry, were subjected to three kinds of reclamation: mechanical, thermal and combined mechanical-thermal, applying

for this aim adequate experimental devices. The obtained reclaims were assessed with regard to the degree of the matrix

liberation from the determined binding material. Reclaims of moulding sands with binders of the form of resin were assessed

with regard to ignition loss values and pH reaction, while reclaims of moulding sands with bentonite with regard to the

residual clay content and pH value. In all cases the results of the performed sieve analyses were estimated and the average

characteristic diameter dl was determined. The reclaimed matrix was applied as a full substitute of the fresh high-silica sand in typical

procedures of preparing core sands used for making shaped samples for bending strength investigations, Rg

u

.

An innovative system designed for the continuous monitoring of acoustic climate of urban areas was presented in the paper. The assessment of environmental threats is performed using online data, acquired through a grid of engineered monitoring stations collecting comprehensive information about the acoustic climate of urban areas. The grid of proposed devices provides valuable data for the purpose of long and short time acoustic climate analysis. Dynamic estimation of noise source parameters and real measurement results of emission data are utilized to create dynamic noise maps accessible to the general public. This operation is performed through the noise source prediction employing a propagation model being optimized for computer cluster implementation requirements. It enables the system to generate noise maps in a reasonable time and to publish regularly map updates in the Internet. Moreover, the functionality of the system was extended with new techniques for assessing noise-induced harmful effects on the human hearing system. The principle of operation of the dosimeter is based on a modified psychoacoustic model of hearing and on the results of research performed with participation of volunteers concerning the impact of noise on hearing. The primary function of the dosimeter is to estimate, in real time, auditory effects which are caused by exposure to noise. The results of measurements and simulations performed by the system prototype are depicted and analyzed. Several cases of long-term and short-term measurements of noise originating from various sources were considered in detail. The presented outcomes of predicted degree of the hearing threshold shift induced during the noise exposure can increase the awareness of harmfulness of excessive sound levels.

The successful design and implementation of hydroengineering projects crucially rests upon three collaborative pillars of research: field observations, physical models, and mathematical models.

The article attempts to identify environmental conditions for the development of cogeneration companies in Poland. The article systematizes knowledge about environmental regulations which concern this issue. Within the framework of identified environmental conditions, the authors characterize issues related to national legislation that regulates the operation of cogeneration companies, as well as the requirements resulting from European Union and national regulations in this matter. These regulations, directly and indirectly, affect the long-term future of cogeneration companies and the energy sector as a whole. Undoubtedly, in the current state of environmental regulations in force, the key change for a power company such as a cogeneration company is to meet the requirements for the emission of harmful substances. The change was introduced in 2016 as a result of more stringent emission limits and the adoption of the IED (Industrial Emissions Directive). The implementation of recommendations of the BAT (Best Available Techniques) Conclusions in 2017 additionally tightened the required limits. Undeniably, the key period for cogeneration companies will be 2021 as per the implementation of imposed harmful substances emission’s limits. The article comprehensively discusses the conditions that substantially affect the long-term growth of a cogeneration company and are crucial when making assumptions intended to address strategic development issues in the domestic fuel and power sector.

In order to prepare a coal company for the development of future events, it is important to predict how can evolve the key environmental factors. This article presents the most important factors influencing the hard coal demand in Poland. They have been used as explanatory variables during the creation of a mathematical model of coal sales. In order to build the coal sales forecast, the authors used the ARMAX model. Its validation was performed based on such accuracy measures as: RMSE, MAPE and Theil’s index. The conducted studies have allowed the statistically significant factors out of all factors taken into account to be identified. They also enabled the creation of the forecast of coal sales volume in Poland in the coming years. To maintain the predictability of the forecast, the mining company should continually control the macro environment. The proper demand forecast allows for the flexible and dynamic adjustment of production or stock levels to market changes. It also makes it possible to adapt the product range to the customer’s requirements and expectations, which, in turn, translates into increased sales, the release of funds, reduced operating costs and increased financial liquidity of the coal company. Creating a forecast is the first step in planning a hard coal mining strategy. Knowing the future needs, we are able to plan the necessary level of production factors in advance. The right strategy, tailored to the environment, will allow the company to eliminate unnecessary costs and to optimize employment. It will also help the company to fully use machines and equipment and production capacity. Thanks to these efforts, the company will be able to reduce production costs and increase operating profit, thus survive in a turbulent environment.

The issue of air pollution, resulting to a large extent from the use of fossil fuels for energy purposes, is one of the most serious environmental threats in several Polish cities, but also outside of them. The amount of pollutants emitted into the atmosphere translates into the living conditions of the inhabitants. The utilization of geothermal energy, which is a renewable and ecological source of energy, brings noticeable improvement in the quality of atmospheric air, as evidenced by significant ecological effects achieved by working geothermal district heating plants. The paper presents results of comprehensive considerations focused on assessing the effects of utilization of geothermal water and energy in Poland. Issues related to the implementation of exploration works aimed at acquiring geothermal water resources, as well as environmental aspects of the use of geothermal waters and energy were discussed. The undertaken considerations have been directed at assessing whether the use of such a kind of renewable energy resources could have an impact on improving the living conditions of the local community.

The article reports three experiments conducted to determine whether musicians possess better ability of recognising the sources of natural sounds than non-musicians. The study was inspired by reports which indicate that musical training develops not only musical hearing, but also enhances various non-musical auditory capabilities. Recognition and detection thresholds were measured for recordings of environmental sounds presented in quiet (Experiment 1) and in the background of a noise masker (Experiment 2). The listener’s ability of sound source recognition was inferred from the recognition-detection threshold gap (RDTG) defined as the difference in signal level between the thresholds of sound recognition and sound detection. Contrary to what was expected from reports of enhanced auditory abilities of musicians, the RDTGs were not smaller for musicians than for non-musicians. In Experiment 3, detection thresholds were measured with an adaptive procedure comprising three interleaved stimulus tracks with different sounds. It was found that the threshold elevation caused by stimulus interleaving was similar for musicians and non-musicians. The lack of superiority of musicians over non-musicians in the auditory tasks explored in this study is explained in terms of a listening strategy known as casual listening mode, which is a basis for auditory orientation in the environment.

The aim of this paper is to present characteristics, toxicity and environmental behavior of nanoparticles (NPs) (silver, copper, gold, zinc oxide, titanium dioxide, iron oxide) that most frequently occur in consumer products. In addition, NPs are addressed as the new aquatic environmental pollutant of the 21st century. NPs are adsorbed onto particles in the aquatic systems (clay minerals, fulvic and humic acids), or they can adsorb environmental pollutants (heavy metal ions, organic compounds). Nanosilver (nAg) is released from consumer products into the aquatic environment. It can threaten aquatic organisms with high toxicity. Interestingly, copper nanoparticles (Cu-NPs) demonstrate higher toxicity to bacteria and aquatic microorganisms than those of nanosilver nAg. Their small size and reactivity can cause penetration into the tissues and interfere with the metabolic systems of living organisms and bacterial biogeochemical cycles. The behavior of NPs is not fully recognized. Nevertheless, it is known that NPs can agglomerate, bind with ions (chlorides, sulphates, phosphates) or organic compounds. They can also be bound or immobilized by slurry. The NPs behavior depends on process conditions, i.e. pH, ionic strength, temperature and presence of other chemical compounds. It is unknown how NPs behave in the aquatic environment. Therefore, the research on this problem should be carried out under different process conditions. As for the toxicity, it is important to understand where the differences in the research results come from. As NPs have an impact on not only aquatic organisms but also human health and life, it is necessary to recognize their toxic doses and know standards/regulations that determine the permissible concentrations of NPs in the environment.

There are two methods to produce primary copper: hydrometallurgical and pyrometallurgical. Copper concentrates, from which copper

matte is melted, constitute the charge at melting primary copper in the pyrometallurgical process. This process consists of a few stages, of

which the basic ones are roasting and smelting. Smelting process may be bath and flash. Slag from copper production, on the end of

process contain less 0,8%. It is treat as a waste or used other field, but only in a few friction. The slag amount for waste management or

storage equaled 11 741 – 16 011 million tons in 2011. This is a serious ecological problem. The following slags were investigated: slag

originated from the primary copper production process in the flash furnace of the Outtokumpuja Company in HM Głogów 2 (Sample S2):

the same slag after the copper removal performed according the up to now technology (Sample S1): slag originated from the primary

copper production process in the flash furnace of the Outtokumpuja Company in HM Głogów 2, after the copper removal performed

according the new technology (Sample S3). In practice, all tested slags satisfy the allowance criteria of storing on the dumping grounds of

wastes other than hazardous and neutral.

The paper, especially dealt with problems of reclamation of used furan sand, carried out in new, vibratory sand reclamation unit REGMAS

developed by researches from AGH-University of Science and Technology, Faculty of Foundry Engineering in Cracow (Poland).

Functional characteristics of reclamation unit as well as the results of reclamation of used sand with furfuryl resin are discussed in the

paper. The quality of reclaim was tested by means of the LOI and pH value, dust content in the reclaim and at least by the the quality of

the castings produced in moulds prepared with the use of reclaimed matrix.