This study focused on the effect of heavy metal cobalt ions (at concentrations of 1–1000 ppm) on the development and enzymatic activity of four entomopathogenic fungi: Beauveria bassiana, Beauveria brongniartii, Isaria fumosorosea and Metarhizium robertsii, commonly used in biological plant protection. It was found that each of the tested species of fungi reacted individually to contact with the Co2+ ions at their various concentrations. Depending on the variants of the experiment carried out, there were changes in the development of the mycelia (mainly growth inhibition) and their morphological features (color and structure) in comparison to the control samples. Co2+ ions had a fungistatic effect on all fungal strains, whereas a fungicidal effect was noted at concentrations of 750 ppm and 1000 ppm against M. robertsii and I. fumosorosea, respectively. In addition, there was a discrepancy in enzymatic activity between the tested fungal species developing in the medium with varying concentrations of metal salt. The inhibitory effect of Co2+ ions on lipase production was observed in I. fumosorosea. Protease production was stimulated in B. bassiana at all Co2+ concentrations, whereas in M. robertsii this effect was noted at 1 ppm. The changing dynamics of extracellular fungal hydrolases, due to the action of Co2+ ions, may translate into the role of these microorganisms in the processes of insect pathogenesis. This work suggests that severe pollution of the environment by cobalt could be a restrictive factor for the development and pathogenicity of entomopathogenic fungi and must be taken into account for their successful application in biological plant protection.
In this investigation, the formation of oxide scales on different Co-Ni based superalloys of γ–γ′ type was analyzed. Co-20Ni-7Al-7W (at. %) alloy as well as its W-free modifications based on Co-Ni-Al-Mo-Nb and Co-Ni-Al-Ta systems was analyzed under conditions of high temperature oxidation at 800 and 900°C. Therefore, the alloys were isothermally oxidized at selected temperatures for 100 h in laboratory furnace. Afterwards, the oxidation products were evaluated by means of X-ray diffraction (XRD), optical microscopy (OM) and scanning electron microscopy (SEM). The performed tests showed that W-free alloys exhibit worse oxidation resistance compared to those of Co-Ni-Al-W alloys. After oxidation at 900°C, all alloys were prone of oxide spallation. The scales characterized by oxide peeling were mostly composed of complex Co-based oxides, including CoWO4, CoTa2O6, Co2Mo3O8, CoNb2O6.
Considering the advantages of hollow fiber supported liquid membrane (HFSLM), it has been applied for extraction of Co(II) with a motivation to extract cobalt from various waste resources. Extraction efficiency and transport behavior of Co(II) through HFSLM containing Cyanex 272 diluted in kerosene were investigated. Experiments were performed as a function of aqueous feed solution velocity (1000 mL/min) for both feed and strip, pH of feed solution in the range of 4.00-6.75, the carrier concentration of 25-1000 mol/m3, and acid concentration in strip solution of 1-500 mol/m3on. The mass transfer rate or flux JCo(II), which is a function of metal concentration, volume of solution, and membrane area were analyzed. The optimum condition for extraction of Co(II) was pH of 6.00, Cyanex 272 concentration of 500 mol/m3 and H2SO4 concentration of 100 mol/m3.
The paper presents results of research on cobalt and nickel ions removal from monocomponent solutions
using Purolite ion exchange resins. It has been shown that C 160 ion exchange resin has the best
sorption properties for both ions (Qe – 72.5 mg Co/g and 88.2 mg Ni/g). Regeneration process of this
ion exchanger has high efficiency, achieving about 93% for cobalt ions and about 84% in case of nickel
ions. It has been shown that the use of ion exchange method with suitable ion exchange resins guarantees
effective removal of cobalt and nickel ions from solutions with very high concentrations corresponding
to contents of these metals in industrial wastewaters (e.g. galvanic). In case of C 160 ion exchange resin,
after the sorption process is carried out in one 50 minute cycle, the cobalt concentration decreased from
about 30 000 mg/L to about 9 500 mg/L (approx. 68%), whereas nickel concentration reached about
6 300 mg/L (approx. 79%). Studied chelating resins don’t have such high sorption capacities. In their
case, it is required to convert cobalt and nickel ions into complex forms. The kinetics of studied processes
were described by pseudo-second order equations.
At present, industrial development is increasing pollution of soils, air and natural waters. These
pollutants have a negative effect on the health and life of living organisms. Metals which interfere with
the natural biological balance and inhibit self-cleaning processes in water bodies have particularly
toxic effects. Cobalt, which gets into the environment from industrial sewage from electrochemical
plants and the metallurgical industry, also belong to this group. This is also relatively rare and precious
element, so it is important to look for additional sources of its recovery. Chemical and physicochemical
methods such as: precipitation, extraction, membrane processes – nanofiltration, reverse
osmosis, sorption and ion exchange are used to recover cobalt. The choice of method depends on: the
kind and composition of wastewaters as well as on form and concentration of the pollutants.
Ion exchange resins produced by Purolite which were used to remove cobalt ions from solutions
with concentrations corresponding to its contents in galvanic wastewater was the subject of the study.
It has been shown that the C 160 ion exchange resin has the best the sorption properties for Co2+ ions
(54.7 mg/g). In case of this ion exchange resin, after sorption process carried out in one 50 minute cycle,
cobalt concentration decreased from about 30 g/L to about 9 g/L. The values of the sorption capacity
do not depend on the method of introducing the solution into an ion exchange column (pouring or dropping).
E ach of the tested ion exchange resins is characterized by a high degree of cobalt concentration
after regeneration using mineral acids, which can be advantageous in selecting the recovery method for
this metal.
The aim of our research was to investigate the genotoxic effects of cobalt chloride and copper chloride in mouse bone marrow cells using the micronucleus (MN) assay. The three different concentrations of cobalt chloride (11.2, 22.5 and 45 mg kg-1) and copper chloride (1.17, 2.35 and 4.70 mg kg-1) were injected intraperitoneally to mice for 24 and 48 hours. It was observed that both of these heavy metals induced a significant increase in frequency of micronucleated polychromatic erythrocytes (MNPCE) at different concentrations in mice for 24 and 48 hours when compared with the control. Furthermore, the significant reduction for the polychromatic erythrocyte/normochromatic erythrocyte (PCE/NCE) ratio which is indicative of bone marrow cytotoxicity was observed in bone marrow cells which were treated with copper chloride at all concentrations for 24 and 48 hours. No reduction of the PCE/NCE ratio was observed both 24 and 48 hours after all the doses of cobalt chloride tested as compared to the negative control. These results lead us to the conclusion that copper chloride may have genotoxic and cytotoxic properties due to induction in the frequency of MN and a reduction in PCE/NCE ratio in bone marrow cells of mice, whereas cobalt chloride induced only genotoxic effect in mice bone marrow
The influence of the electrode geometry on the microstructure and corrosion behaviour of Co-Mo nano-crystalline coatings elaborated by electrodeposition is studied. The corrosion behaviour was determined in the Ringer’s solution at 25°C. Electrodeposition mechanisms are also discussed as a function of the electrode geometry. The electrode geometry was found to affect the growth rate and, under certain conditions, the microstructure (existence of channels and pores). It does not have influence on the corrosion behaviour.
The influence on the corrosion behaviour of Co-Mo nano-crystalline coatings of dissolved oxygen is studied in the Ringer’s solution and artificial saliva at 25°C. This was done by means of potentiodynamic tests and surface observations. It was shown that dissolved oxygen has no influence on passivity, oxidation of the coating and selective dissolution of cobalt. By contrast, dissolved oxygen affects corrosion. General corrosion was observed in the Ringer’s solution whereas pitting corrosion was found in artificial saliva.
The work presents the results of the studies of Co-Cr-Mo casting alloys used in the production of frame casts of removable dentures,
crowns and bridges in dental prosthetics. The studies were performed on four Co-Cr-Mo alloys of different contents of Mo, W and other
additives. Electrochemical tests were performed, which aimed at examining the corrosion resistance of the alloys and observing the alloy
structure after chronoamperometric tests with the potential in the area of the occurrence of the passive layer breakpoint. The alloy
microstructure images after chronoamperometric tests show the presence of non-uniformly distributed general corrosion. Moreover, a
project of cobalt alloy casting was elaborated using a ceramic mold casting. Additionally, analysis of the obtained microstructure was
performed. The microstructure of the examined alloys was of the dendrite type. This microstructure was chemically inhomogeneous and
consisted of an austenitic matrix formed by a solid cobalt solution and chromium in the core dendritic structure.
This work presents the studies on the electrochemical process of thin palladium layers formation onto electrodeposited cobalt coatings. The suggested methodology consists of the preparation of thick and smooth cobalt substrate via galvanostatic electrodeposition. Cobalt coatings were prepared under different cathodic current density conditions from acidic bath containing cobalt sulphate and addition of boric acid. Obtained cobalt layers were analyzed by x-ray diffraction to determine their phase composition. Freshly prepared cobalt coatings were modificated by the galvanic displacement method in PdCl2 solution, to obtain smooth and compact Pd layer. The comparison of electrocatalytic properties of Co coatings with Co/Pd ones enabled to determine the influence of Palladium presence in cathodic deposits on the hydrogen evolution process.
The paper presents the effect of ZrO2 layer deposition by the ALD process on the physicochemical properties of cobalt-based alloys (Realloy C and EOS CoCr SP2) intended for application in prosthetic dentistry. The paper shows the results of the surface roughness measurements made by the AFM method as well as the wettability and free surface energy measurements. Additionally,potentiodynamic tests of pitting corrosion resistance and electrochemical impedance spectroscopy in a solution of artificial saliva were carried out. Tests were carried out on the samples in the initial state and after surface modification with the ZrO2 layer. Based on these results, the usefulness (e.g. enhancement of corrosion resistance and biocompatibility) of the proposed ZrO2 layer on the cobalt alloys was assessed.
In this work, we developed the lanthanum strontium cobalt ferrite and it’s composite with yttrium iron cobaltite (mass ratio of 1:1) cathodes as a thin layer on Ce0.8Sm0.2O1.9 electrolyte. Two kinds of electrode pastes were prepared, with and without 6 mm polystyrene beads as an additional pore former. The performance of cathode materials was investigated by electrochemical impedance spectroscopy as a function of electrode morphology, oxygen partial pressure, potential, and temperature. The polarization resistance of the more porous electrodes was lower than those electrodes prepared without additional pore former in the whole potential range at 800°C, slightly lower at 700°C and 600°C. The addition of yttrium iron cobaltite decreased the performance of both types of cathodes. The lower polarization resistance of porous cathodes is due to the facilitated gas diffusion through their structure.
The study of the possibility of removing organic compounds from wastewater originating from the biodiesel purification stage by two catalytic processes, HSO5-/transition metal and Fenton method has been presented. The source of the ion HSO5- is potassium monopersulphate (2KHSO5·KHSO4·K2SO4) (Oxone) that may be decomposed into radicals (OH., SO4-., SO5-.) by means of transition metal as Co(II). Different concentrations were used for both compounds and the combination ([Co2+] = 1.00μM/[HSO5-] = 5.00·10-2 M) achieved the highest COD removal (60%) and complete decomposition of the oxidant was verified for contact times of 45 min. This process has some advantages comparing to the conventional Fenton method such as the absence of the costly pH adjustment and the Fe(III) hydroxide sludge which characterize this treatment process. The Fenton process showed that the combination of [H2O2] = 2.00M/[Fe2+] = 0.70 M was the best and archived COD removal of 80%. The treatments studied in this research have achieved high COD removal, but the wastewater from the biodiesel purification stage presents very high parametric values of Chemical Oxygen Demand (667,000 mgO2/L), so the final COD concentration reached is still above the emission limit of discharge in surface water, according the Portuguese Law (Decree-Law 236/98). However, both treatments have proved to be feasible techniques for the pre-oxidation of the wastewater under study and can be considered as a suitable pre-treatment for this type of wastewaters. A rough economic analysis of both processes was, also, made.
The paper presents the results of research on the determination of the effect of pouring temperature on the macrostructure of the castings
subjected to complex (surface and volume) modification and double filtration. Tested castings were made of post-production scrap (gating
system parts) of IN-713C superalloy. Tests included the evaluation of the number of grains per 1 mm2
, mean grain surface area, shape
factor and tensile strength. Casting temperature below 1470 °C positively influenced the modification effect. The grains were finer and the
mechanical properties increased, especially for castings with thicker walls. On the other hand, manufacture of thin walled castings of high
quality require pouring temperature above 1480 °C.
In current casting technology of cored, thin walled castings, the modifying coating is applied on the surface of wax pattern and, after the
removal of the wax, is transferred to inner mould surface. This way the modification leading to grain refinement occur on the surface of
the casting. In thin walled castings the modification effect can also be seen on the other (external) side of the casting. Proper reproduction
of details in thin walled castings require high pouring temperature which intensify the chemical reactions on the mould – molten metal
interface. This may lead to degradation of the surface of the castings. The core modification process is thought to circumvent this problem.
The modifying coating is applied to the surface of the core. The degradation of internal surface of the casting is less relevant. The most
important factor in this technology is “trough” modification – obtaining fine grained structure on the surface opposite to the surface
reproduced by the core.
The paper presents the results concerning impact of modification (volume and surface techniques), pouring temperature and mould
temperature on stereological parameters of macrostructure in IN713C castings made using post-production scrap. The ability to adjust the
grain size is one of the main issues in the manufacturing of different nickel superalloy castings used in aircraft engines. By increasing the
grain size one can increase the mechanical properties, like diffusion creep resistance, in higher temperatures. The fine grained castings. on
the other hand, have higher mechanical properties in lower temperatures and higher resistance to thermal fatigue. The test moulds used in
this study, supplied by Pratt and Whitney Rzeszow, are ordinarily used to cast the samples for tensile stress testing. Volume modification
was carried out using the patented filter containing cobalt aluminate. The macrostructure was described using the number of grains per
mm2
, mean grain surface area and shape index. Obtained results show strong relationship between the modification technique, pouring
temperature and grain size. There was no significant impact of mould temperature on macrostructure.
This study was attempted to study for recovery of Li as Li2CO3 from cathode active material, especially NCA (LiNiCoAlO2), recovered from spent lithium ion batteries. This consists of two major processes, carbonation using CO2 and water leaching. Carbonation using CO2 was performed at 600ºC, 700ºC and 800ºC, and NCA (LiNiCoAlO2) was phase-separated into Li2CO3, NiO and CoO. The water leaching process using the differences in solubility was performed to obtain the optimum conditions by using the washing time and the ratio of the sample to the distilled water as variables. As a result, NCA (LiNiCoAlO2) was phase-separated into Li2CO3 and NiO, CoO at 700ºC, and Li2CO3 in water was recovered through vacuum filtration after 1 hour at a 1:30 weight ratio of the powder and distilled water. Finally, Li2CO3 containing Li of more than 98 wt.% was recovered.