Szczegóły
Tytuł artykułu
The homogeneity of immiscible liquid–liquid dispersion in a vessel agitated by Rushton turbineTytuł czasopisma
Chemical and Process EngineeringRocznik
2021Wolumin
vol. 42Numer
No 3Autorzy
Afiliacje
Formánek, Roman : Czech Technical University in Prague, Faculty of Mechanical Engineering, Department of Process Engineering, Technická 4, 160 00 Prague, Czech Republic ; Šulc, Radek : Czech Technical University in Prague, Faculty of Mechanical Engineering, Department of Process Engineering, Technická 4, 160 00 Prague, Czech RepublicSłowa kluczowe
liquid–liquid dispersion homogeneity ; Sauter mean diameter ; drop size distribution ; Rushtonturbine ; intermittency turbulenceWydział PAN
Nauki TechniczneZakres
209-222Wydawca
Polish Academy of Sciences Committee of Chemical and Process EngineeringBibliografia
Bałdyga J., Bourne J.R., 1993. Drop breakup and intermittent turbulence. J. Chem. Eng. Japan, 26, 738–741. DOI: 10.1252/jcej.26.738.Bałdyga J., Bourne J.R., 1995. Interpretation of turbulent mixing using fractals and multifractals. Chem. Eng. Sci., 50, 381–400. DOI: 10.1016/0009-2509(94)00217-F.
Bałdyga J., PodgórskaW., 1998. Drop break-up in intermittent turbulence. Maximum stable drop size and transient sizes of drops. Can. J. Chem. Eng., 76, 456–470. DOI: 10.1002/cjce.5450760316.
Bucciarelli E., Formánek R., Kysela B., Fort I., Šulc R., 2019. Dispersion kinetics in mechanically agitated vessel. EPJ Web Conf., 213, 02008. DOI: 10.1051/epjconf/201921302008.
Chen H.T., Middleman S., 1967. Drop size distribution in agitated liquid–liquid systems. AIChE J., 13, 989–995. DOI: 10.1002/aic.690130529.
Formánek R., Kysela B., Šulc R., 2019a. Drop size evolution kinetics in a liquid–liquid dispersions system in a vessel agitated by a Rushton turbine. Chem. Eng. Trans., 74, 1039–1044. DOI: 10.3303/CET1974174.
Formánek R., Kysela B., Šulc R., 2019b. Image analysis of particle size: effect of light source type. EPJ Web Conf., 213, 02021. DOI: 10.1051/epjconf/201921302021.
Formánek R., Šulc R., 2019c. Dispersion of immiscible liquid–liquid system in a vessel agitated by a Sawtooth impeller: Drop size time evolution. Proceedings of the International Conference Experimental Fluid Mechanics 2019. Franzensbad, Czech Republic, 19–22 November 2019, 136–139.
Formánek R., Šulc R., 2020. The liquid–liquid dispersion homogeneity in a vessel agitated by a high-shear sawtooth impeller. Processes, 8, 1012. DOI: 10.3390/pr8091012.
Hinze J.O., 1955. Fundamentals of the hydrodynamic mechanism of splitting in dispersion processes. AIChE J., 1, 289–295. DOI: 10.1002/aic.690010303.
Hong P.O., Lee J.M., 1983. Unsteady-state liquid–liquid dispersions in agitated vessels. Ind. Eng. Chem. Process Des. Dev., 22, 130–135. DOI: 10.1021/i200020a021.
Jasikova D., Kotek M., Kysela B., Sulc R., Kopecky V., 2018. Compiled visualization with IPI method for analysing of liquid–liquid mixing process. EPJ Web Conf., 180, 02039. DOI: 10.1051/epjconf/201818002039.
Khalil A., Puel F., Chevalier Y., Galvan J.-M., Rivoire A., Klein J.-P., 2010. Study of droplet size distribution during an emulsification process using in situ video probe coupled with an automatic image analysis. Chem. Eng. J., 165, 946–957. DOI: 10.1016/j.cej.2010.10.031.
Kolmogorov A.N., 1949. On the breakage of drops in a turbulent flow. Dokl. Akad. Nauk SSSR, 66, 825–828. Kraume M., Gäbler A., Schulze K., 2004. Influence of physical properties on drop size distribution of stirred liquid–liquid dispersions. Chem. Eng. Technol., 27, 330–334. DOI: 10.1002/ceat.200402006.
Maaß S., Kraume M., 2012. Determination of breakage rates using single drop experiments. Chem. Eng. Sci., 70, 146–164. DOI: 10.1016/j.ces.2011.08.027.
Malík M., Primas J., Kotek M., Jašíková D., Kopecký V., 2019. Mixing of two immiscible phases measured by industrial electrical impedance tomography system. Mech. Ind., 20, 707. DOI: 10.1051/meca/2019081.
Maluta F., Montante G., Paglianti A., 2020. Analysis of immiscible liquid–liquid mixing in stirred tanks by Electrical Resistance Tomography. Chem. Eng. Sci., 227, 115898. DOI: 10.1016/j.ces.2020.115898.
Pacek A.W., Chamsart S, Nienow A.W., Bakker A., 1999. The influence of impeller type on mean drop size and drop size distribution in an agitated vessel. Chem. Eng. Sci., 54, 4211–4222. DOI: 10.1016/S0009-2509(99)00156-6.
Rodgers T.L., Cooke M., 2012. Correlation of drop size with sheat tip speed. 14��ℎ European Conference on Mixing. Warszawa, Poland, 10–13 September 2012, 407–412.
Šulc R., Ditl P., Fort I., Jašíkova D., Kotek M., Kopecký V., Kysela B., 2017. Local velocity scaling in T400 vessel agitated by Rushton turbine in a fully turbulent region. EPJ Web Conf., 143, 02120. DOI: 10.1051/epjconf/201714302120.
Šulc R., Pešava V., Ditl P., 2015. Local turbulent energy dissipation rate in a vessel agitated by a Rushton turbine. Chem. Process Eng., 36, 135–149. DOI: 10.1515/cpe-2015-0011.
Zhou G, Kresta S.M., 1998. Evolution of drop size distribution in liquid–liquid dispersions for various impellers. Chem. Eng. Sci., 53, 2099–2113. DOI: 10.1016/S0009-2509(97)00437-5.
Data
2022.01.13Typ
ArticleIdentyfikator
DOI: 10.24425/cpe.2021.138926 ; ISSN 2300-1925 (Chemical and Process Engineering)Rada naukowa
Editorial Board
Ali Mesbah, UC Berkeley, USA 
0000-0002-1700-0600
Anna Gancarczyk, Institute of Chemical Engineering, Polish Academy of Sciences, Poland 0000-0002-2847-8992
Anna Trusek, Wrocław University of Science and Technology, Poland 0000-0002-3886-7166
Bettina Muster-Slawitsch, AAE Intec, Austria 0000-0002-5944-0831
Daria Camilla Boffito, Polytechnique Montreal, Canada 0000-0002-5252-5752
Donata Konopacka-Łyskawa, Gdańsk University of Technology, Poland 0000-0002-2924-7360
Dorota Antos, Rzeszów University of Technology, Poland 0000-0001-8246-5052
Evgeny Rebrov, University of Warwick, UK 0000-0001-6056-9520
Georgios Stefanidis, National Technical University of Athens, Greece 0000-0002-4347-1350
Ireneusz Grubecki, Bydgoszcz Univeristy of Science and Technology, Poland 0000-0001-5378-3115
Johan Tinge, Fibrant B.V., The Netherlands 0000-0003-1776-9580
Katarzyna Bizon, Cracow University of Technology, Poland 0000-0001-7600-4452
Katarzyna Szymańska, Silesian University of Technology, Poland 0000-0002-1653-9540
Marcin Bizukojć, Łódź University of Technology, Poland 0000-0003-1641-9917
Marek Ochowiak, Poznań University of Technology, Poland 0000-0003-1543-9967
Mirko Skiborowski, Hamburg University of Technology, Germany 0000-0001-9694-963X
Nikola Nikacevic, University of Belgrade, Serbia 0000-0003-1135-5336
Rafał Rakoczy, West Pomeranian University of Technology, Poland 0000-0002-5770-926X
Richard Lakerveld, Hong Kong University of Science and Technology, Hong Kong 0000-0001-7444-2678
Tom van Gerven, KU Leuven, Belgium 0000-0003-2051-5696
Tomasz Sosnowski, Warsaw University of Technology, Poland 0000-0002-6775-3766