Details

Title

Comparison of methods applied to measuring the lightning impulse breakdown voltage of insulating pressboard impregnated with mineral oil and natural ester

Journal title

Metrology and Measurement Systems

Yearbook

2021

Volume

vol. 28

Issue

No 4

Affiliation

Klarecki, Artur : Lodz University of Technology, Institute of Electrical Power Engineering, Stefanowskiego 18/22, 90-924 Lodz, Poland ; Klarecki, Artur : Lodz University of Technology, Interdisciplinary Doctoral School, Zeromskiego 116, 90-924 Lodz, Poland ; Rózga, Paweł : Lodz University of Technology, Institute of Electrical Power Engineering, Stefanowskiego 18/22, 90-924 Lodz, Poland ; Stuchała, Filip : Lodz University of Technology, Institute of Electrical Power Engineering, Stefanowskiego 18/22, 90-924 Lodz, Poland

Authors

Keywords

lightning impulse voltage ; high voltage ; measurement methods ; dielectric liquids ; insulating pressboard ; Weibull distribution

Divisions of PAS

Nauki Techniczne

Coverage

693-709

Publisher

Polish Academy of Sciences Committee on Metrology and Scientific Instrumentation

Bibliography

[1] Liu, Q.,Wang, Z. D., & Perrot, F. (2009). Impulse breakdown voltages of ester-based transformer oils determined by using different test methods. IEEE Conference on Electrical Insulation and Dielectric Phenomena, 608–612. https://doi.org/10.1109/CEIDP.2009.5377741
[2] Rozga, P. (2016). Streamer propagation in a non-uniform electric field under lightning impulse in short gaps insulated with natural ester and mineral oil. Bulletin of the Polish Academy of Sciences: Technical Science, 64(1), 171–179. https://doi.org/10.1515/bpasts-2016-0019
[3] Rozga, P. (2016). Using the three-parameter Weibull distribution in assessment of threshold strength of pressboard impregnated by different liquid dielectrics. IET Science, Measurement & Technology, 10(6), 665–670. https://doi.org/10.1049/iet-smt.2016.0061
[4] Aniserowicz, K. (2019). Analytical calculations of surges caused by direct lightning strike to underground intrusion detection system. Bulletin of the Polish Academy of Sciences: Technical Science, 67(2), 263–269. https://doi.org/10.24425/bpas.2019.128118
[5] Mosinski, F. (1995). Metody statystyczne w technice wysokich napięć. Wydawnictwo Politechniki Łódzkiej. (in Polish)
[6] Vibholm, S., & Thyregod, P. (1988). A study of the up-and-down method for non-normal distribution functions. IEEE Transactions on Electrical Insulation, 23(3), 357–364. https://doi.org/10.1109/14.2375
[7] Rozga, P. (2019). Lightning strength of gas, liquid and solid insulation – experience formthe laboratory tests. The International Conference on Power Transformers “Transformer’19”, 199–212.
[8] Khaled, U., & Beroual, A. (2020). Lightning impulse breakdown voltage of synthetic and natural ester liquids-based Fe3O4, Al2O3 and SiO2 nanofluids. Alexandria Engineering Journal, 59(5), 3709–3713. https://doi.org/10.1016/j.aej.2020.06.025
[9] Zhang, Q., You, H., Guo, C., Qin, Y., Ma, J., &Wen, T. (2016) Experimental research of dispersion of SF6 discharge breakdown voltage under lighting impulse. High Voltage Engineering, 42(11), 3415– 3420.
[10] Zhang, Y., Xie, S., Jiang, X., Ye, L., Zhang, Ch., Sun, P., Mu, Z., & Sima, W. (2019). Study on consistency of failure probability characteristics of oil-paper insulation under different impulse voltages. Proceedings of the 21st International Symposium on High Voltage Engineering, 1192–1206. https://doi.org/10.1007/978-3-030-31676-1_111
[11] Cousineau, D. (2009). Fitting the three-parameter Weibull distribution: review and evaluation of existing and new methods. IEEE Transactions on Dielectrics and Electrical Insulation, 16(1), 281– 288. https://doi.org/10.1109/TDEI.2009.4784578
[12] European Standards. (2014). Electric strength of insulating materials – Test methods – Part 3: Additional requirements for 1,2/50 μs impulse tests (IEC 60243-3: 2014).
[13] Witos, F., Opilski, Z., Szerszen, G., & Setkiewicz, M. (2019). The 8AE-PD computer measurement system for registration and analysis of acoustic emission signals generated by partial discharges in oil power transformers. Metrology and Measurement Systems, 26(2), 403–418. https://doi.org/10.24425/mms.2019.128355
[14] Shen, Z., Wang, F., Wang, Z., Li, J. (2021). A critical review of plant-based insulating fluids for transformer: 30 years of development. Renewable and Sustainable Energy Reviews, 41, 110783. https://doi.org/10.1016/j.rser.2021.110783
[15] Liu, Q., & Wang, Z. D. (2013) Breakdown and withstand strengths of ester transformer liquids in a quasi-uniform field under impulse voltages. IEEE Transactions on Dielectrics and Electrical Insulation, 20(2), 571–579. https://doi.org/10.1109/TDEI.2013.6508761
[16] Mohan Rao, U., Fofana, I., Beroual, A., Rozga, P., Pompili, M., Calcara, L., & Rapp, K. J. (2020). A review on pre-breakdown phenomena in ester fluids: Prepared by the international study group of IEEE DEIS liquid dielectrics technical committee. IEEE Transactions on Dielectrics and Electrical Insulation, 27(5), 1546–1560. https://doi.org/10.1109/TDEI.2020.008765
[17] Dixon,W. J. (1965). The Up-and-Down method for small samples. Journal of the American Statistical Association, 60, 967–978.
[18] Malska,W., & Mazur, D. (2017). Analiza wpływu prędkosci wiatru na generację mocy na przykładzie farmy wiatrowej. Przegląd Elektrotechniczny, 93(4), 54–57 https://doi.org/10.15199/48.2017.04.14
[19] Kalbfleisch, J. D., & Prentice, R. L. (2002). The statistical analysis of failure time data (2nd ed.). J. Wiley. https://doi.org/10.1002/9781118032985
[20] De Haan, L., & Ferreira, A. (2007). Extreme value theory: an introduction. Springer Science & Business Media. https://doi.org/10.1007/0-387-34471-3
[21] Chmura, L., Morshuis, P. H. F., Smit, J. J., & Janssen, A. (2015). Life-data analysis for condition assessment of high-voltage assets. IEEE Electrical Insulation Magazine, 31(5), 20–25. https://doi.org/10.1109/MEI.2015.7214443
[22] Cargill. (2018). https://www.cargill.com/bioindustrial/fr3-fluid/fr3-fluid-technical-details [23] Nynas. (20210). Nytro Taurus (IEC 60296) Ed. 5 – Standard Grade. https://www.nynas.com/en/product-areas/transformer-oils/oils/nytro-taurus/
[24] Rozga P., Beroual A., Przybylek P., Jaroszewski M., & Strzelecki K. (2020). A review on synthetic ester liquids for transformer applications. Energies, 13(23), 6429. https://doi.org/10.3390/en13236429
[25] European Standards. (2011). Power transformers – Part 1: General (IEC 60076-1:2011)

Date

2021.12.22

Type

Article

Identifier

DOI: 10.24425/mms.2021.137703
×