Details

Title

Distinguishing the Plateau and Valley Components of Profiles From Various Types of Two-Process Textures

Journal title

Metrology and Measurement Systems

Yearbook

2016

Volume

vol. 23

Issue

No 4

Authors

Keywords

surface topography ; two-process texture ; material ratio

Divisions of PAS

Nauki Techniczne

Coverage

593-602

Publisher

Polish Academy of Sciences Committee on Metrology and Scientific Instrumentation

Date

2016.12.15

Type

Artykuły / Articles

Identifier

DOI: 10.1515/mms-2016-0046 ; ISSN 2080-9050, e-ISSN 2300-1941

Source

Metrology and Measurement Systems; 2016; vol. 23; No 4; 593-602

References

Dzierwa (2013), The study of the tribological properties of oneprocess and two - process textures after vapour blasting and lapping using pin - on - disc tests Key, Engineering Materials, 527. ; Leefe (1998), Bi - Gaussian representation of worn surface topography in elastic contact problems for, Tribology Energy Conservation, 281. ; Dzierwa (2014), Comparison of tribological behaviors of one - process and twoprocess steel surfaces in ball - on - disc tests Proceedings of the Institution of Mechanical : of, Engineers Part J Journal Engineering Tribology, 228. ; Watts (1974), Using an hyperbola as a transition model to fit two - regime straight - line data, Technometrics, 16, 369, doi.org/10.1080/00401706.1974.10489205 ; Malburg (1993), Characterization of surface texture generated by plateau - honing process, CIRP Annals, 42, 637, doi.org/10.1016/S0007-8506(07)62527-X ; Pawlus (1993), Effects of honed cylinder surface topography on the wear of piston - piston ring - cylinder assemblies under artificially increased dustiness conditions, Tribology International, 26. ; Grabon (2010), Tribological characteristics of one - process and two - process cylinder liner honed surfaces under reciprocating sliding conditions, Tribology International, 43, 1882, doi.org/10.1016/j.triboint.2010.02.003 ; Willis (1986), Surface finish in relation to cylinder liners, Wear, 109, 351, doi.org/10.1016/0043-1648(86)90278-4 ; Yu (2013), Dimple patterns for different circumstances, Lubrication Science, 25, 67, doi.org/10.1002/ls.168 ; Godi (2014), Chiffre A new procedure for characterizing textured surfaces with a deterministic pattern of valley features, Meas Sci Technol, 24, 085009, doi.org/10.1088/0957-0233/24/8/085009 ; Etsion (2005), State of the art in laser surface texturing ASME of, Journal Tribology, 127, 248, doi.org/10.1115/1.1828070 ; Whitehouse (1985), Assessment of surface finish profiles produced by multiprocess manufacture, Proc Inst Mech Eng, 199. ; Codgell (2008), A Convolved multi - Gaussian probability distribution for surface topography application Precision, Engineering, 32, 34. ; Grabon (2011), Problems of surface topography with oil pockets analysis, Phys Conf Ser, 311. ; Campbell (1973), Cylinder bore surface roughness in internal combustion engines Its appreciation and control, Wear, 19, 163, doi.org/10.1016/0043-1648(72)90302-X ; Pawlus (2008), The method of truncation parameters measurement from material ratio curve Precision, Engineering, 32, 342. ; Pawlus (2008), Simulation of stratified surface topographies, Wear, 264. ; Godi (2014), Chiffre A plateau - valley separation method for textured surfaces with a deterministic pattern Precision, Engineering, 38, 190. ; Greenwood (1966), Contact of nominally flat surfaces Proceedings of the A and, Royal Society Mathematical Physical Engineering Sciences London, 295. ; Zipin (1990), Analysis of the Rk surface roughness parameter proposals Precision, Engineering, 12, 106. ; Jakubiec (2003), Validation of software for calculation the surface roughness parameters according to ISO of th International Conference on Metrology and Properties of engineering Surfaces , Halmstad University, Proc, 3. ; Santochi (1982), A study on the functional properties of the honed surface, CIRP Annals, 31, 432, doi.org/10.1016/S0007-8506(07)63342-3 ; Anderberg (2009), Alternative descriptions of roughness for cylinder liner production of Materials Processing, Journal Technology, 209. ; Nielsen (1988), New approaches to surface roughness evaluation of special surfaces Precision, Engineering, 10, 209. ; Grabon (2014), Proposals of methods of oil capacity calculation, Tribology International, 75.

Open Access Policy

Metrology and Measurement Systems is an open access journal with all content available with no charge in full text version.


The journal content is available under the license CC BY-NC-ND 4.0. https://creativecommons.org/licenses/by-nc-nd/4.0/
×