Details

Title

Relationship Between Bake Hardening, Snoek-Köster and Dislocation-Enhanced Snoek Peaks in Coarse Grained Low Carbon Steel

Journal title

Archives of Metallurgy and Materials

Yearbook

2016

Issue

No 3 September

Authors

Divisions of PAS

Nauki Techniczne

Publisher

Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences

Date

2016

Identifier

DOI: 10.1515/amm-2016-0271 ; e-ISSN 2300-1909

Source

Archives of Metallurgy and Materials; 2016; No 3 September

References

Magalas (2008), Recent advances in determination of the logarithmic decrement and the resonant frequency in low - frequency mechanical spectroscopy Sol, St Phen, 62, 137. ; Eloot (1997), Calculation of the effect of texture on the Snoek peak height in steels, ISIJ Int, 43, 610, doi.org/10.2355/isijinternational.37.610 ; Jiang (2003), Carbon dissolution and diffusion in ferrite and austenite from first principles, Physical Rev, 47, 214103, doi.org/10.1103/PhysRevB.67.214103 ; Magalas (2003), Mechanical spectroscopy Fundamentals Sol, St Phen, 9, 1, doi.org/10.4028/www.scientific.net/SSP.89.1 ; Domain (2004), Ab initio study of foreign interstitial atom interactions with intrinsic point defects in a - Fe, Physical Rev, 48, 144112, doi.org/10.1103/PhysRevB.69.144112 ; Krupitzer (2009), Effects of preferred orientation on Snoek phenomena in commercial steels Mat, Sci Eng, 46, 521. ; Garruchet (2008), Modelling of carbon Snoek peak in ferrite : Coupling molecular dynamics and kinetic Monte - Carlo simulations, Computational Materials Science, 49, 286, doi.org/10.1016/j.commatsci.2007.11.004 ; Wilson (1960), The contribution of atmosphere locking to the strain - ageing of low carbon steels, Acta Metallurgica, 22, 36, doi.org/10.1016/0001-6160(60)90138-3 ; Magalas (2006), Advanced techniques for determining high and extreme high damping : OMI - A new algorithm to compute the logarithmic decrement Key, Eng Mat, 61, 319. ; Rubianes (1987), San Juan The dislocation - enhanced Snoek effect DESE in high purity iron doped with different amounts of carbon, Journal de Physique, 53, 185. ; Eloot (1997), Effect of texture on the height of the Snoek peak in electrical steels, ISIJ Int, 44, 615, doi.org/10.2355/isijinternational.37.615 ; Magalas (2006), Determination of the logarithmic decrement in mechanical spectroscopy Sol, St Phen, 59, 115. ; Schaller (2001), ) Mechanical Spectroscopy Q Mat, Science Forum, 11, 1. ; Schoeck (1963), Friccion interna debido a la interaction entre dislocaciones y atomos solutos, Acta Metallurgica, 69, 617, doi.org/10.1016/0001-6160(63)90096-8 ; Xu Tingdong (2004), Kinetics of non - equilibrium grain - boundary segregation Progress in Materials, Science, 32, 109. ; Weller (2001), Point defect relaxations Mat, Science Forum, 41, 366. ; Baker (2002), Mechanism of bake hardening in ultralow carbon steel containing niobium and titanium additions, Materials Science and Technology, 14, 541, doi.org/10.1179/026708302225001741 ; Magalas (2003), On the interaction of dislocations with interstitial atoms in BCC metals using mechanical spectroscopy : the Cold Work the Snoek - Köster and the Snoek peak Dedicated to the memory of Professor Ting - Sui Kê, Acta Metallurgica Sinica, 57, 1145. ; Chan Jung (2013), Impulse excitation internal friction study of dislocation and point defect interactions in ultra - low carbon bake - hardenable steel, Metall Mater Trans, 27, 1963. ; De Cooman (1994), N ageing in aluminized steel sheet : an industrial application of high frequency internal friction measurements to point defect - interface interactions, Alloy Compd, 15, 211. ; Schoeck (1988), On the mechanism of the Snoek - Koester relaxation, Scripta Metall, 73, 389, doi.org/10.1016/S0036-9748(88)80211-4 ; De (1999), Static strain aging behavior of ultra - low carbon bake hardening steel, Scripta Materialia, 16, 831, doi.org/10.1016/S1359-6462(99)00232-8 ; Soenen (2004), Competition between grain boundary segregation and Cottrell atmosphere formation during static strain aging in ultra - low carbon bake hardening steels, Acta Materialia, 29, 3483, doi.org/10.1016/j.actamat.2004.03.046 ; Numakura (1996), The Snoek relaxation in dilute ternary alloys A review de, Phys IV, 79, 97. ; Magalas (2012), Toward high - resolution mechanical spectroscopy HRMS Logarithmic decrement Sol, St Phen, 63, 184. ; De (2000), Effect of dislocation density on the low temperature aging behavior of an ultra low carbon bake hardening steel, Alloy Compd, 17, 310. ; Weller (1996), Anelastic relaxation of point defects in cubic crystals, Phys IV, 38, 63. ; Weller (2006), The Snoek relaxation in bcc metals from steel wire to meteorites Mat, Sci Eng, 40, 442. ; Chong Zhang (2014), Jie / impurity diffusivities in bcc Fe : A first - principles study, Journal of Nuclear Materials, 87, 455. ; Seeger (1982), The kink - pair - formation theory of the Snoek - Köster relaxation, Scripta Metall, 72, 241, doi.org/10.1016/0036-9748(82)90343-X ; Zhao (2000), Kinetics of Cottrell atmosphere formation during strain aging of ultra - low carbon steels, Materials Letters, 25, 374, doi.org/10.1016/S0167-577X(00)00062-8 ; Zhao (2000), A model for the Cottrell atmosphere formation during aging of ultra low carbon bake hardening steels, ISIJ International, 23, 725, doi.org/10.2355/isijinternational.40.725 ; Magalas (1985), The dislocation - enhanced Snoek effect DESE in Iron, Journal de Physique, 52, 253. ; Blanter (2003), Strain - induced interaction of dissolved atoms and mechanical relaxation in solid solutions A review Sol, St Phen, 81, 115, doi.org/10.4028/www.scientific.net/SSP.89.115 ; Fu (2009), Internal friction on the bake - hardening behavior of Si TRIP steel, Mater Sci Technol, 18, 0. ; Snoek (1941), Effect of small quantities of carbon and nitrogen on the elastic and plastic properties of iron, Physica, 36, 711, doi.org/10.1016/S0031-8914(41)90517-7 ; Majewski (2012), Advances in Computational High - Resolution Mechanical Spectroscopy HRMS Part - Logarithmic Decrement IOP Conf Series Materials, Science and Engineering, 90, 1. ; Serzhantova (1997), Effect of plastic strain on the temperature spectrum of internal friction of austenitic and ferritic steels and, Metal Science Heat Treatment, 56, 376, doi.org/10.1007/BF02469061 ; Magalas (1996), Mechanical spectroscopy of the carbon Snoek relaxation in ultra - high purity iron, Phys IV, 39, 151. ; Ngai (1994), Theoretical basis and general applicability of the coupling model to relaxations in coupled systems, Alloy Compd, 75, 211. ; Magalas (2015), Development of high - resolution mechanical spectroscopy HRMS : status and perspectives HRMS coupled with a laser dilatometer, Arch Metall Mater, 35, 2069. ; Etienne (2003), Mechanical spectroscopy and other relaxation spectroscopies Sol, St Phen, 10, 31, doi.org/10.4028/www.scientific.net/SSP.89.31 ; Koiwa (2004), A note on Dr Mat, Sci Eng, 37, 370. ; Cui Yan (2013), Ji Aimin Effect of grain size and annealing condition on grain boundary segregation of carbon atoms in ULC steel, Applied Mechanics and Materials, 33, 286. ; Magalas (1981), The Snoek - Köster relaxation in iron de, Phys, 70, 127. ; Magalas (1996), Effect of texture on the Snoek relaxation in a commercial rolled steel, Phys IV, 42, 147. ; Magalas (2003), Measurement techniques of the logarithmic decrement Sol, St Phen, 60, 247, doi.org/10.4028/www.scientific.net/SSP.89.247 ; Elsen (1993), On the mechanism of bake - hardening, Steel Research, 21, 431. ; Li (2003), Torsion pendulum method to evaluate the internal friction and elastic modulus of films, Review of Scientific Instruments, 91, 2477, doi.org/10.1063/1.1544079 ; Magalas (2006), The zero - point drift in resonant mechanical spectroscopy Sol, St Phen, 89, 285, doi.org/10.4028/www.scientific.net/SSP.115.285 ; Magalas (2001), Diffusion in the Cottrell atmosphere and, Defect Diffusion Forum, 77, 194. ; Saitoh (2004), Influence of substitutional atoms on the Snoek peak of carbon in b iron, Acta Materialia, 83, 1255, doi.org/10.1016/j.actamat.2003.11.009 ; Seeger (1979), A theory of the Snoek - Köster relaxation ( cold - work peak ) in metals ( a, phys stat sol, 74, 457, doi.org/10.1002/pssa.2210550213 ; Jiling Dong (2013), Yinsheng Gyu Detection and determination of solute carbon in grain interior to correlate with the overall carbon content and grain size in ultra - low - carbon steel, Microsc Microanal, 34, 66, doi.org/10.1017/S143192761301235X ; You (2013), Interactions of foreign interstitial and substitutional atoms in bcc iron from ab initio calculations, Physica B, 84, 417. ; Liu (2014), Effects of dilute substitutional solutes on interstitial carbon in a - Fe : Interactions and associated carbon diffusion from first - principles calculations, Phys Rev B, 82, 024103, doi.org/10.1103/PhysRevB.90.024103 ; Magalas (2009), Ghost internal friction peaks ghost asymmetrical peak broadening and narrowing Misunderstandings consequences and solution, Mater Sci Eng, 88, 521. ; Numakura (2003), Mechanical relaxation due to interstitial solutes in metals Sol, St Phen, 80, 93, doi.org/10.4028/www.scientific.net/SSP.89.93 ; Vasilyev (2008), Nature of strain aging stages in bake hardening steel for automotive application and, Materials Science Engineering, 85, 485. ; Schoeck (1982), The cold work peak, Scripta Metall, 71, 233, doi.org/10.1016/0036-9748(82)90342-8 ; Cottrell (1949), Dislocation theory of yielding and strain ageing in iron, Proc Phys Soc, 19, 49, doi.org/10.1088/0370-1298/62/1/308 ; Baker (2003), The use of internal friction techniques as a quality control tool in the mild steel industry of Materials Processing, Journal Technology, 45, 143. ; Jung (2012), de Cooman The IF spectrum of Fe and Fe - alloys measured by the impulse excitation technique Sol, St Phen, 67, 184. ; Magalas (1983), The dislocation - enhanced Snoek peak in Fe - C alloys, Journal de Physique, 51, 645. ; Blanter (2000), Carbon - substitutional interaction in austenite, Scripta Materialia, 86, 435, doi.org/10.1016/S1359-6462(00)00450-4 ; Kuang (2015), Effect of continuous annealing on microstructure and bake hardening behavior of low carbon steel of Iron and, Journal Steel Research International, 30, 163, doi.org/10.1016/S1006-706X(15)60025-5 ; Magalas (1987), Dislocation relaxations in solids de Physique, Journal, 54, 209. ; De (2001), Kinetics of strain aging in bake hardening ultra low carbon steel - a comparison with low carbon steel of Materials Engineering and, Journal Performance, 26, 567. ; Won Seok Choi (2015), Internal - friction analysis of dislocation - interstitial carbon interactions in press - hardened MnB steel and, Materials Science Engineering, 68, 639. ; Magalas (2009), Mechanical spectroscopy internal friction and ultrasonic attenuation Collection of works, Mater Sci Eng, 12, 521. ; Shifang Xiao (2015), The anisotropic character of Snoek relaxation in Fe C system : A kinetic Monte Carlo and molecular dynamics simulation, Phys Stat Solidi, 50, 252. ; Magalas (2006), The Snoek - Köster relaxation and dislocation - enhanced Snoek effect DESE in deformed iron Sol, St Phen, 58, 67, doi.org/10.4028/www.scientific.net/SSP.115.67
×