@ARTICLE{Yang_Seung_Y._Warm_2021, author={Yang, Seung Y. and Kim, Bong H. and Lee, Da B. and Choi, Kweon H. and Kim, Nam S. and Ha, Seong H. and Yoon, Young O. and Lim, Hyun K. and Kim, Shae and Kim, Young J.}, volume={vol. 66}, number={No 4}, journal={Archives of Metallurgy and Materials}, pages={1013-1018}, howpublished={online}, year={2021}, publisher={Institute of Metallurgy and Materials Science of Polish Academy of Sciences}, publisher={Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences}, abstract={In this paper, as a purpose to apply the supersaturated solid-solutionized Al-9Mg alloy to the structural sheet parts of automotive, tensile tests were conducted under the various conditions and a constitutive equation was derived from the tensile test results. Al-9Mg alloy was produced using a special Mg master alloy containing Al2Ca during the casting process and extruded into the sheet. In order to study the deformation behavior of Al-9Mg alloy in warm temperature forming environments, tensile tests were conducted under the temperature of 373 K-573 K and the strain rate of 0.001/s~0.1/s. In addition, by using the raw data obtained from tensile tests, a constitutive equation of the Al-9Mg alloy was derived for predicting the optimized condition of the hot stamping process. Al-9Mg alloy showed uncommon deformation behavior at the 373 K and 473 K temperature conditions. The calculated curves from the constitutive equation well-matched with the measured curves from the experiments particularly under the low temperature and high strain rate conditions.}, type={Article}, title={Warm Tensile Deformation Behavior and Constitutive Equation of Supersaturated Solid-Solutionized Al-9Mg Extruded Alloy}, URL={http://www.czasopisma.pan.pl/Content/119289/PDF/AMM-2021-4-18-Bong%20H%20Kim.pdf}, doi={10.24425/amm.2021.136416}, keywords={Aluminum alloy, Al-9Mg alloy, Tensile test, Constitutive equation}, }