Applied sciences

Chemical and Process Engineering: New Frontiers

Content

Chemical and Process Engineering | 2021 | vol. 42 | No 1

Download PDF Download RIS Download Bibtex

Abstract

Batch dark fermentation of wheat straw and boiled potato wastes at volatile suspended solids (VSS) 5 g VSS/L are examined and compared. Investigations on dark fermentation of potatowastes and wheat straw were carried out at different pH and OFR (oxygen flow rate) values and inoculum pretreatment. The obtained hydrogen yield from waste potato was 70 mL/g VSS, while for hydrolysed wheat straw it amounted to 80 mL/g VSS. The optimum conditions for potato dark fermentation are acidic pH 6.0 and OFR 1.0 mL/h, while for the wheat straw, optimal conditions are pH 6.4 and OFR 4.6 mL/h. The comparison revealed a significant difference in hydrogen production due to the type of substrate, inoculum stressing and DF conditions applied.
Go to article

Bibliography

Achinas S., Li Y., Achinas V., Euverink G.J.W., 2019. Biogas potential from the anaerobic digestion of potato peels: Process performance and kinetics evaluation. Energies, 12, 2311. DOI: 10.3390/en12122311.
Aly S.S., Imai T., Hassouna M.S., Kim Nguyen D.M., Higuchi T., Kanno A., Yamamoto K., Akada R., Sekine M., 2018. Identification of factors that accelerate hydrogen production by Clostridium butyricum RAK25832 using casamino acids as a nitrogen source. Int. J. Hydrogen Energy, 43, 5300–5313. DOI: 10.1016/j.ijhydene.2017.08.171.
Bartacek J., Zabranska J., Lens P.N.L., 2007. Developments and constraints in fermentative hydrogen production. Biofuels, Bioprod. Biorefin., 1, 201–214. DOI: 10.1002/bbb.17.
Bundhoo Z.M.A., 2019. Potential of bio-hydrogen production from dark fermentation of crop residues: A review. Int. J. Hydrogen Energy, 44, 17346–17362. DOI: 10.1016/j.ijhydene.2018.11.098.
Chaganti S.R., Kim D.H., Lalman J.A., 2012. Dark fermentative hydrogen production by mixed anaerobic cultures: Effect of inoculum treatment methods on hydrogen yield. Renewable Energy, 48, 117–121. DOI: 10.1016/j.renene.2012.04.015.
Chi C.H., Chen K.W., Huang J.J., Chuang Y.C., Wu M.H., 1995. Gas composition in Clostridium septicum gas gangrene. J. Formos. Med. Assoc., 94, 757–759.
De Cicco A., Jeanty J.-C., 2017. The EU potato sector – statistics on production, prices and trade – Statistics Explained. Statistic Explained. Available at: https://ec.europa.eu/eurostat/statistics-explained/index.php?title= The_EU_potato_sector_-_statistics_on_production,_prices_and_trade.
Dessě P., Lakaniemi A.M., Lens P.N.L., 2017. Biohydrogen production from xylose by fresh and digested activated sludge at 37, 55 and 70 °C. Water Res., 115, 120–129. DOI: 10.1016/j.watres.2017.02.063.
Gallipoli A., Braguglia C.M., Gianico A., Montecchio D., Pagliaccia P., 2020. Kitchen waste valorization through a mild-temperature pretreatment to enhance biogas production and fermentability: Kinetics study in mesophilic and thermophilic regimen. J. Environ. Sci., 89, 167–179. DOI: 10.1016/j.jes.2019.10.016.
Garcia-Bernet D., Steyer J.-P., Bernet N., 2017. Traitement anaérobie des effluents industriels liquides Traitement anaérobie des effluents industriels liquides. Techniques de l’Ingénieur, Réf : J3943 v2.
García Depraect O., Muńoz R., van Lier J.B., Rene E.R., Diaz-Cruces V.F., León Becerril E., 2020. Three-stage process for tequila vinasse valorization through sequential lactate, biohydrogen and methane production. Bioresour. Technol., 307, 123160. DOI: 10.1016/j.biortech.2020.123160.
Han W., Ye M., Zhu A.J., Zhao H.T., Li Y.F., 2015. Batch dark fermentation from enzymatic hydrolyzed food waste for hydrogen production. Bioresour. Technol., 191, 24–29. DOI: 10.1016/j.biortech.2015.04.120.
Hawkes F.R., Hussy I., Kyazze G., Dinsdale R., Hawkes D.L., 2007. Continuous dark fermentative hydrogen production by mesophilic microflora: Principles and progress. Int. J. Hydrogen Energy, 32, 172–184. DOI: 10.1016/j.ijhydene.2006.08.014.
Hernández C., Alamilla-Ortiz Z.L., Escalante A.E., Navarro-Díaz M., Carrillo-Reyes J., Moreno-Andrade I., Valdez- Vazquez I., 2019. Heat-shock treatment applied to inocula for H2 production decreases microbial diversities, interspecific interactions and performance using cellulose as substrate. Int. J. Hydrogen Energy, 44, 13126– 13134. DOI: 10.1016/j.ijhydene.2019.03.124.
Kumar G., Bakonyi P., Periyasamy S., Kim S.H., Nemestóthy N., Bélafi-Bakó K., 2015. Lignocellulose biohydrogen: Practical challenges and recent progress. Renewable Sustainable Energy Rev., 44, 728–737. DOI: 10.1016/j.rser. 2015.01.042.
Laurinavichene T.V., Belokopytov B.F., Laurinavichius K.S., Tekucheva D.N., Seibert M., Tsygankov A.A., 2010. Towards the integration of dark- and photo-fermentative waste treatment. 3. Potato as substrate for sequential dark fermentation and light-driven H2 production. Int. J. Hydrogen Energy, 35, 8536–8543. DOI: 10.1016/j.ijhydene.2010.02.063.
Leszczyński, W., 2000. Jakość ziemniaka konsumpcyjnego. Żywność, Nauka, Technologia, Jakość, Supl., 4(25), 5–27.
Li Y., Zhang Q., Deng L., Liu Z., Jiang H., Wang F., 2018. Biohydrogen production from fermentation of cotton stalk hydrolysate by Klebsiella sp. WL1316 newly isolated from wild carp (Cyprinus carpio L.) of the Tarim River basin. Appl. Microbiol. Biotechnol., 102, 4231–4242. DOI: 10.1007/s00253-018-8882-z.
Moriarty K., 2013. Feasibility study of anaerobic digestion of food waste in St. Bernard, Louisiana. A study prepared in partnership with the Environmental Protection Agency for the RE-Powering America’s Land Initiative: Siting renewable energy on potentially contaminated land and mine sites. National Renewable Energy Laboratory (NREL), Technical Report, NREL/TP-7A30-57082. DOI: 10.2172/1067946.
Nasirian N., Almassi M., Minaei S., Widmann R., 2011. Development of a method for biohydrogen production from wheat straw by dark fermentation. Int. J. Hydrogen Energy, 36, 411–420. DOI: 10.1016/j.ijhydene.2010.09.073.
Paillet F., Maron, A., Moscovi, R., Steyer J.P., Tapia-Venegas E., Bernet N., Trably E., 2019. Improvement of biohydrogen production from glycerol in micro-oxidative environment. Int. J. Hydrogen Energy, 44, 17802– 17812. DOI: 10.1016/j.ijhydene.2019.05.082.
Patel A.K., Debroy A., Sharma S., Saini R., Mathur A., Gupta R., Tuli D.K., 2015. Biohydrogen production from a novel alkalophilic isolate Clostridium sp. IODB-O3. Bioresour. Technol., 175, 291–297. DOI: 10.1016/j.biortech.2014.10.110.
Sekoai P.T., Ayeni A.O., Daramola M.O., 2019. Parametric optimization of biohydrogen production from potato waste and scale-up study using immobilized anaerobic mixed sludge. Waste Biomass Valorization, 10, 1177–1189. DOI: 10.1007/s12649-017-0136-2.
Si B.C., Li J.M., Zhu Z.B., Zhang Y.H., Lu J.W., Shen R.X., Zhang C., 2016. Continuous production of biohythane from hydrothermal liquefied cornstalk biomass via twostage highrate anaerobic reactors. Biotechnol. Biofuels, 9, 254. DOI: 10.1186/s13068-016-0666-z.
Słupek E., Kucharska K., Ge˛bicki J., 2019. Alternative methods for dark fermentation course analysis. SN Appl. Sci., 1, 469. DOI: 10.1007/s42452-019-0488-2.
Sołowski G., Konkol I., Cenian A., 2019a. Perspectives of hydrogen production from corn wastes in Poland by means of dark fermentation. Ecol. Chem. Eng. S, 26, 255–263. DOI: 10.1515/eces-2019-0031.
Sołowski G., Konkol, I., Hrycak B., Czylkowski D., 2019b. Hydrogen and methane production under conditions of anaerobic digestion of key-lime and cabbage wastes. Agritech, 39(3), 243–250. DOI: 10.22146/agritech.35848.
Sołowski G., Konkol I., Cenian A., 2020a. Production of hydrogen and methane from lignocellulose waste by fermentation. A review of chemical pretreatment for enhancing the efficiency of the digestion process. J. Cleaner Prod., 267, 121721. DOI: 10.1016/j.jclepro.2020.121721.
Sołowski G., Konkol I., Cenian A., 2020b. Methane and hydrogen production from cotton waste by dark fermentation under anaerobic and micro-aerobic conditions. Biomass Bioenergy, 138, 105576. DOI: 10.1016/j.biombioe.2020.105576.
Woodward J., Orr M., Cordray K., Greenbaum E., 2000. Enzymatic production of biohydrogen. Nature, 405, 1014–1015. DOI: 10.1038/35016633.
Go to article

Authors and Affiliations

Gaweł Sołowski
1
Izabela Konkol
1
Marwa Shalaby
2
Adam Cenian
1

  1. Institute of Fluid-Flow Machinery Polish Academy of Sciences, Physical Aspects of Ecoenergy Department, 14 Fiszera St., 80-231 Gdańsk, Poland
  2. National Research Center in Cairo, Department of Chemical Engineering and Pilot Plant, El Bijouth St., Dokki, Cairo, Egypt 12622
Download PDF Download RIS Download Bibtex

Abstract

The paper presents different approaches to the proper and accurate production and modelling (multi- phase reaction) of CaCO3 formation in the most popular, different types of reactors, i.e. continuous reactor (STR – stirred tank reactors, MSMPR – mixed suspension, mixed product removal; tube reactor), a bubble column reactor and a thin film reactor.
Many different methods of calcium carbonate production and their effect on the various characteristics of the product have been presented and discussed. One of the most important, from the point of view of practical applications, is the morphology and size of the produced particles as well as their agglomerates and size distribution. The size of the obtained CaCO3 particles and their agglomerates can vary from nanometers to micrometers. It depends on many factors but the most important are the conditions calcium carbonate precipitation and then stored.
The experimental research was strongly aided by theoretical considerations on the correct description of the process of calcium carbonate precipitation. More than once, the correct modelling of a specific process contributed to the explanation of the phenomena observed during the experiment (i.e. formation of polyforms, intermediate products, etc.).
Moreover, different methods and approaches to the accurate description of crystallization processes as well as main CFD problems has been widely reviewed. It can be used as a basic material to formulation and implementation of new, accurate models describing not only multiphase crystallization processes s taking place in different chemical reactors.
Go to article

Bibliography

Auone A., Ramshaw C., 1999. Process intensification: Heat and mass transfer characteristics of liquid films on rotating discs. Int. J. Heat Mass Transfer, 42, 2543-2556. DOI: 10.1016/S0017-9310(98)00336-6.
Baldyga J., Bourne J.R., 1984a. A fluid mechanical approach to turbulent mixing and chemical reaction. Part I: Inadequacies of available methods. Chem. Eng. Commun., 28, 231–241. DOI: 10.1080/00986448408940135.
Baldyga J., Bourne J.R., 1984b. A fluid mechanical approach to turbulent mixing and chemical reaction. Part II: Mi- cromixing in the light of turbulence theory. Chem. Eng. Commun., 28, 243–258. DOI: 10.1080/00986448408940136.
Baldyga J., Bourne J.R., 1984c. A fluid mechanical approach to turbulent mixing and chemical reaction. Part III: Computational and experimental results for the new micromixing model. Chem. Eng. Commun., 28, 259–281. DOI: 10.1080/00986448408940137.
Baldyga J., Podgorska W., Pohorecki R., 1995. Mixing-precipitation model with application to double feed semibatch precipitation . Chem. Eng. Sci., 50, 1281–1300. DOI: 10.1016/0009-2509(95)98841-2.
Bandyopadhyaya R., Kumar R., Gandhi K.S., 2001. Modelling of CaCO3 nanoparticle formation during overbasing of lubricating oil additive. Langmuir, 17, 1015–1029. DOI: 10.1021/la000023r.
Bao W., Li H., Zhang Y., 2009. Preparation of monodispersed aragonite microspheres via a carbonation crystal- lization pathway. Cryst. Res. Technol., 44, 395–401. DOI: 10.1002/crat.200800065.
Boodhoo K.V.K., Jachuck R.J.J., 2000. Process intensification: Spinning disc reactor for condensation polymeriza- tion. Green Chem., 2, 235–244. DOI: 10.1039/b002667k.
Burns J.R., Jachuck R.J.J., 2005. Monitoring of CaCO3 production on a spinning disc reactor using conductivity measurements. AIChE J., 51, 1497–1507. DOI: 10.1002/aic.10414.
Cafiero L.M., Baffi G., Chianese A., Jachuck R.J.J., 2002. Process intensification: precipitation of barium sulfate using a spinning disk reactor. Ind. Eng. Chem. Res., 41, 5240–5246. DOI: 10.1021/ie010654w.
Chakraborty D., Bhatia S.K., 1996. Formation and aggregation of polymorphs in continuous precipitation. 2. Kinetics of CaCO3 precipitation. Ind. Eng. Chem. Res., 35, 1995–2006. DOI: 10.1021/ie950402t.
Chen J.F., Wang Y.H., Guo F., Wang X.M., Zheng, Ch., 2000. Synthesis of nanoparticles with novel technology: High-gravity reactive precipitation. Ind. Eng. Chem. Res., 39, 948–954. DOI: 10.1021/ie990549a.
Chen P.-C., Tai C.Y., Lee K.C., 1997. Morphology and growth rate of calcium carbonate crystals in a gas-liquid-solid reactive crystallizer. Chem. Eng. Sci., 52, 4171–4177. DOI: 10.1016/S0009-2509(97)00259-5.
Cheng B., Lei M., Yu J., Zhao X., 2004. Preparation of monodispersed cubic calcium carbonate particles via precipitation reaction. Materials Lett., 58, 1565–1570. DOI: 10.1016/j.matlet.2003.10.027.
Colfen H., Antonietti M., 2005. Mesocrystals: Inorganic superstructures made by highly parallel crystallization and controlled alignment. Angew. Chem. Int. Ed., 44, 5576–5591. DOI: 10.1002/anie.200500496.
Collier A.P., Hounslow M.J., 1999. Growth and aggregation rates for calcite and calcium oxalate monohydrate. AIChE J., 45, 2298–2305. DOI: 10.1002/aic.690451105.
Czaplicka N., Konopacka-Łyskawa D., 2019. The overview of reactors used for the production of precipitated tion route. Aparatura Badawcza i Dydaktyczna, 24(1), 83–90.
Dindore V.Y., Brilman D.W.F., Versteeg G.F., 2005. Hollow fiber membrane contactor as a gas–liquid model contactor. Chem. Eng. Sci., 60, 467–479. DOI: 10.1016/j.ces.2004.07.129.
Ding L., Wu B., Luo P. 2018. Preparation of CaCO3 nanoparticles in a surface-aerated tank stirred by a long-short blades agitator. Powder Technol., 333, 339–346. DOI: 10.1016/j.powtec.2018.04.057.
Eek R.A., Dijkstra S., Van Rosmalen G.M., 1995. Dynamic modeling of suspension crystallisers using experimental data. AIChE J., 41, 571–584. DOI: 10.1002/aic.690410315.
Feng B., Yonga A.K., Ana H., 2007. Effect of various factors on the particle size of calcium carbonate formed in a precipitation process. Mater. Sci. Eng., A, 445–446, 170–179. DOI: 10.1016/j.msea.2006.09.010.
Ferziger J.H., Perić, M., 1996. Computational methods for fluid dynamics, Springer-Verlag, Berlin, Germany.
Gahn C., Mersmann A., 1999. Brittle fracture in crystallization processes. Part A. Attrition and abrasion of brittle solids. Chem. Eng. Sci., 54, 1273–1282. DOI: 10.1016/S0009-2509(98)00450-3.
Garside J., Davey R.J., 1980. Invited review secondary contact nucleation: kinetics, growth and scale-up. Chem. Eng. Commun., 4, 393–424. DOI: 10.1080/00986448008935918.
Grimes C.J., Hardcastle T., Manga M.S., Mahmud T., York D.W., 2020. Calcium carbonate particle formation through precipitation in a stagnant bubble and a bubble column reactor. Cryst. Growth Des., 20, 5572–5582. DOI: 10.1021/acs.cgd.0c00741.
Hill P.J., Ng K.M., 1995. New discretization procedure for the breakage equation. AIChE J., 41, 1204–1217. DOI: 10.1002/aic.690410516.
Hindmarsh A.C., 1983. ODEPACK, A Systematized collection of ODE solvers, In: Stepleman R.S., Carver M., Peskin R., Ames W.F., Vichnevetsky R. (Eds.). Scientific Computing, North-Holland, Amsterdam, 1983, 55–64.
Hostomsky J., Jones A.G., 1991. Calcium carbonate crystallization, agglomeration and form during continuous precipitation from solution. J. Phys. D: Appl. Phys., 24, 165–170. DOI: 10.1088/0022-3727/24/2/012.
Hounslow M.J., 1990. A discretized population balance for continuous systems at steady state. AIChE J., 36, 106–116. DOI: 10.1002/aic.690360113.
Hounslow M.J.; Ryall R.L., Marshall V.R., 1988. A discretized population balance for nucleation, growth, and aggregation. AIChE J., 34, 1821–1832. DOI: 10.1002/aic.690341108.
Hounslow M.J., Mumtaz H.S., Collier A.P., Barrick J.P., Bramley A.S., 2001. A micro mechanical model for the rate of aggregation during precipitation from solution. Chem. Eng. Sci., 56, 2543–2552. DOI: 10.1016/S0009- 2509(00)00436-X.
Hulburt H.M., Katz S., 1964. Some problems in particle technology – statistical mechanical formulation. Chem. Eng. Sci., 19, 555–574. DOI: 10.1016/0009-2509(64)85047-8.
Jones A.G., Rigopoulos S., Zauner R., 2005. Crystallization and precipitation engineering. Comput. Chem. Eng., 29, 1159-1166. DOI: 10.1016/j.compchemeng.2005.02.022.
Judat B., Kind M., 2004. Morphology and internal structure of barium sulfate – derivation of a new growth mechanism. J. Colloid Interface Sci., 269, 341–353. DOI: 10.1016/j.jcis.2003.07.047.
Jung T., Kim W.S., Choi Ch.K., 2004. Effect of nonstoichiometry on reaction crystallization of calcium carbonate in a Couette−Taylor reactor. Cryst. Growth Des, 4, 491–495. DOI: 10.1021/cg034240c.
Jung T., Kim W.S., Choi Ch.K., 2005. Effect of monovalent salts on morphology of calcium carbonate crystallized in Couette-Taylor reactor. Cryst. Res. Technol., 40, 586–592. DOI: 10.1002/crat.200410387.
Jung W.M., Kang S.H., Kim W.S., Choi C.K., 2000. Particle morphology of calcium carbonate precipitated by gas- liquid reaction in a Couette-Taylor reactor. Chem. Eng. Sci., 55, 733–747. DOI: 10.1016/S0009-2509(99)00395-4.
Kang S.H., Lee S.G., Jung W.M., Kim M.C., Kim W.S., Choi C.K., Feigelson R.S., 2003. Effect of Taylor vortices on calcium carbonate crystallization by gas–liquid reaction. J. Cryst. Growth, 254, 196–205. DOI: 10.1016/S0022- 0248(03)01152-7.
Kangwook L., Jay H.L., Dae R.Y., Mahoney A.W., 2002. Integrated run-to-run and on line model-based con- trol of particle size distribution for a semi-batch precipitation reactor. Comput. Chem. Eng., 26, 1117–1131. DOI: 10.1016/S0098-1354(02)00030-3.
Kakaraniya S., Gupta A., Mehra A., 2007. Reactive precipitation in gas-slurry systems: The CO2 – Ca(OH)2 – CaCO3 System. Ind. Eng. Chem. Res., 46, 3170–3179. DOI: 10.1021/ie060732l.
Kataki, Y., Tsuge H., 1990. Reactive crystallization of calcium carbonate by gas–liquid and liquid–liquid reactions. Can. J. Chem. Eng., 68, 435–442. DOI: 10.1002/cjce.5450680313.
Kędra-Królik K., Gierycz P., 2006. Obtaining calcium carbonate in a multiphase system by the use of new rotating disc precipitation reactor. J. Therm. Anal. Calorim., 83, 579–582. DOI: 10.1007/s10973-005-7416-y.
Kędra-Królik K., Gierycz P., 2009. Precipitation of nanostructured calcite in a controlled multiphase process. J. Cryst. Growth, 311, 3674–3681. DOI: 10.1016/j.jcrysgro.2009.05.017.
Kędra-Królik K., Gierycz P., 2010. Simulation of nucleation and growing of CaCO3 nanoparticles obtained in the rotating disk reactor. J. Cryst. Growth, 312, 1945–1952. DOI: 10.1016/j.jcrysgro.2010.02.036.
Kim W.S., 2014. Application of Taylor vortex to crystallization. J. Chem. Eng. Jpn, 47, 115–123. DOI: 10.1252/jcej.13we143.
Kitano Y., Park K., Hood D.W., 1962. Pure aragonite synthesis. J. Geophys. Res., 67, 4873–4874. DOI: 10.1029/JZ067i012p04873.
Konopacka-Łyskawa D., Cisiak Z., Kawalec-Pietrenko B., 2009. Effect of liquid circulation in the draft-tube reactor on precipitation of calcium carbonate via carbonation. Powder Technol., 190, 319–323. DOI: 10.1016/j.powtec.2008.08.014.
Kramer H.J.M., Dijkstra J.W., Verheijen P.J.T., Van Rosmalen G.M., 2000. Modeling of industrial crystallizers for control and design purposes. Powder Technol., 108, 185–191. DOI: 10.1016/S0032-5910(99)00219-3.
Kulikov V., Briesen H., Marquardt W. 2005. Scale integration for the coupled simulation of crystallization and fluid dynamics. Chem. Eng. Res. Des., 83, 706–717. DOI: 10.1205/cherd.04363.
Kumar S., Ramkrishna D., 1996. On the solution of population balance equations by discretization – II. A moving pivot technique. Chem. Eng. Sci., 51, 1333–1342. DOI: 10.1016/0009-2509(95)00355-X.
Lim S.T. 1980. Hydrodynamics and mass transfer processes associated with the absorption of oxygen in liquid films flowing across a rotating disc. PhD Thesis. University of Newcastle-upon-Tyne, UK.
Majerczak K., Gierycz P., 2016. Analysis and simulation of monodispersed, nanostructured calcite obtained in a controlled multiphase process. Nanomater. Nanotechnol., 6, DOI: 10.1177/1847980416675127.
Malkaj P., Chrissanthopoulos A., Dalas E., 2004. Understanding nucleation of calcium carbonate on gallium oxide using computer simulation. J. Cryst. Growth, 264, 430–437. DOI: 10.1016/j.jcrysgro.2004.01.005.
Marchisio D.L., Vigil R.D., Fox R.O., 2003. Implementation of quadrature method of moments in CFD codes for aggregation-breakage problems. Chem. Eng. Sci., 58, 3337–3351. DOI: 10.1016/S0009-2509(03)00211-2.
Montes-Hernandez G., Renard F., Geoffroy N., Charlet L., Pironon J., 2007. Calcite precipitation from CO2–H2O– Ca(OH)2 slurry under high pressure of CO2. J. Cryst. Growth, 308, 228–236. DOI: 10.1016/j.jcrysgro.2007.08.005.
Moore S.R., 1986. Mass transfer into thin liquid films with and without chemical reaction. PhD Thesis. University of Newcastle-upon-Tyne, UK.
Mullin J.W., 2001. Crystallization. Butterworth-Heinemann, Oxford, UK.
Myerson A.S, 1999. Molecular modelling applications in crystallization. Cambridge University Press, Cambridge, UK.
Nancollas G.H., Reddy M.M., 1971. The crystallization of calcium carbonate. II. Calcite growth mechanism. J. Colloid Interface Sci., 37, 824–830. DOI: 10.1016/0021-9797(71)90363-8.
Nicmanis N., Hounslow M.J., 1998. Finite-element methods for steady-state population balance equations. AIChE J., 44, 2258–2272. DOI: 10.1002/aic.690441015.
Popescu M.-A., Isopescu R., Matei C., Fagarasan G., Plesu V., 2014. Thermal decomposition of calcium carbonate polymorphs precipitated in the presence of ammonia and alkylamines. Adv. Powder Technol., 25, 500-507. DOI: 10.1016/j.apt.2013.08.003.
Prasher C.L., 1987. Crushing and grinding process handbook. Wiley, New York, US.
Quigley D., Roger P.M., 2008. Free energy and structure of calcium carbonate nanoparticles during early stages of crystallization. J. Chem. Phys., 128, 2211011–2211014. DOI: 10.1063/1.2940322.
Ramkrishna D., 2000. Population balances. Theory and applications to particulate systems in engineering. Academic Press, San Diego, US.
Randolph A.D., Larson, M.A., 1988. Theory of particulate processes, Academic Press, New York, US.
Reddy M.M., Nancollas G.H., 1976. The crystallization of calcium carbonate: IV. The effect of magnesium, strontium and sulfate ions. J. Cryst. Growth, 35, 33–38. DOI: 10.1016/0022-0248(76)90240-2.
Rielly C.D., Marquis A.J., 2001. A particle’s eye view of crystallizer fluid mechanics. Chem. Eng. Sci., 56, 2475– 2493. DOI: 10.1016/S0009-2509(00)00457-7.
Rigopoulos S., Jones A.G., 2001. Dynamic modelling of a bubble column for particle formation via a gas-liquid reaction. Chem. Eng. Sci., 56, 6177–6183. DOI: 10.1016/S0009-2509(01)00259-7.
Rigopoulos S., Jones A.G., 2003a. Modeling of semibatch agglomerative gas–liquid precipitation of CaCO3 in a bubble column reactor. Ind. Eng. Chem. Res., 42, 6567–6575. DOI: 10.1021/ie020851a.
Rigopoulos S., Jones A.G., 2003b. Finite-element scheme for solution of the dynamic population balance. AIChE J., 49, 1127–1139. DOI: 10.1002/aic.690490507.
Sisoev G.M., Matar O.K., Lawrence C.J., 2003. Modelling of film flow over a spinning disk. J. Chem. Technol. Biotechnol., 78, 151–155. DOI: 10.1002/jctb.717.
Sisoev G.M., Matar O.K., Lawrence C.J., 2006. The flow of thin liquid films over spinning discs . Can. J. Chem. Eng., 84, 625-642. DOI: 10.1002/cjce.5450840601.
Schlomach J., Quarch K., Kind M., 2006. Investigation of precipitation of calcium carbonate at high supersaturations. Chem. Eng. Technol., 29, 215-220. DOI: 10.1002/ceat.200500390.
Schwarz M.P., Turner W.J., 1988. Applicability of the standard k-ε turbulence model to gas-stirred baths. Appl. Math. Modell., 12, 273–279. DOI: 10.1016/0307-904X(88)90034-0.
Sha, Z., Palosaari, S., 2000. Mixing and crystallization in suspensions. Chem. Eng. Sci., 55, 1797–1806. DOI: 10.1016/S0009-2509(99)00458-3.
Sohnel O., Mullin J.W., 1982. Precipitation of calcium carbonate. J. Cryst. Growth, 60, 239–250. DOI: 10.1016/0022- 0248(82)90095-1.
Spanos N., Koutsoukos P.G., 1998. Kinetics of precipitation of calcium carbonate in alkaline pH at constant supersaturation. spontaneous and seeded growth. J. Phys. Chem. B, 102, 6679–6684. DOI: 10.1021/jp981171h.
Spiegelman M., 2004. Myths and methods in modeling. LDEO, Columbia University, New York, US.
Tai C.Y., Chen P.-C., Shih S-M., 1993. Size-dependent growth and contact nucleation of calcite crystals. AIChE J., 39, 1472–1482. DOI: 10.1002/aic.690390907.
Tai C.Y., Chen P.-C., 1995. Nucleation, agglomeration and crystal morphology of calcium carbonate. AIChE J., 41, 68–77. DOI: 10.1002/aic.690410108.
Tamura K., Tsuge H., 2006. Characteristic of multistage column crystallizer for gas-liquid reactive crystallization of calcium carbonate. Chem. Eng. Sci., 61, 5818–5826. DOI: 10.1016/j.ces.2006.05.002.
Tobias J., Klein M.L., 1996. Molecular dynamics simulations of a calcium carbonate/calcium sulfonate reverse micelle. J. Phys. Chem. B, 100, 6637–6648. DOI: 10.1021/jp951260j.
Trippa G., Hetherington P., Jachuck R.J.J., 2002. Process intensification: Precipitation of calcium carbonate from the carbonation reaction of lime water using a spinning disc reactor. 15th International symposium on industrial 2002; Sorrento, Italy, 1053–1058.
Tsutsumi A., Nieh J.-Y., Fan L.-S., 1991. Role of the bubble wake in fine particle production of calcium carbonate in bubble column system. Ind. Eng. Chem. Res., 30, 2328–2333. DOI: 10.1021/ie00058a012.
Ukrainczyk M., Kontrec J., Babić-Ivancić V., Brecević L., Kralj D. 2007. Experimental design approach to calcium carbonate precipitation in a semicontinuous process. Powder Technol., 171, 192–199. DOI: 10.1016/j.powtec.2006.10.046.
Vacassy R., Lemaître J., Hofmann H., Gerlings J.H., 2000. Calcium carbonate precipitation using new segmented flow tubular reactor. AIChE J., 46, 1241–1252. DOI: 10.1002/aic.690460616.
Varma A., Morbidelli M., 1997. Mathematical methods in chemical engineering. Oxford University Press, New York, US.
Villermaux J., Falk L., 1994. A generalized mixing model for initial contacting of reactive fluids. Chem. Eng. Sci., 49, 5127–5140. DOI: 10.1016/0009-2509(94)00303-3.
Wachi S., Jones A.G., 1991. Mass transfer with chemical reaction and precipitation. Chem. Eng. Sci., 46, 1027–1033. DOI: 10.1016/0009-2509(91)85095-F.
Wan B., Ring T.A., 2006. Verification of SMOM and QMOM population balance modeling in CFD code us- ing analytical solutions for batch particulate processes. China Particuology, 4, 243–249. DOI: 10.1016/S1672- 2515(07)60268-1.
Wang T., Antonietti M., Colfen H., 2006. Calcite mesocrystals: “Morphing” crystals by a polyelectrolyte. Chem. Eur. J., 12, 5722–5730. DOI: 10.1002/chem.200501019.
Wei H.Y., Garside J., 1997. Application of CFD modelling to precipitation systems. Chem. Eng. Res. Des., 75, 219–227. DOI: 10.1205/026387697523471.
Wen Y., Xiang L., Jin Y., 2003. Synthesis of plate-like calcium carbonate via carbonation route. Mater. Lett., 57, 2565–2571. DOI: 10.1016/S0167-577X(02)01312-5.
Wojcik J., Jones A.G., 1998. Dynamics and stability of continuous MSMPR agglomerative precipitation: Numer- ical analysis of the dual particle coordinate model. Comput. Chem. Eng., 22, 535–545. DOI: 10.1016/S0098-1354(97)00239-1.
Wray J.L., Daniels F., 1957. Precipitation of calcite and aragonite. J. Am. Chem. Soc., 79, 2031–2034. DOI: 10.1021/ ja01566a001.
Wszelaka-Rylik M., Piotrowska K., Gierycz P., 2015. Simulation, aggregation and thermal analysis of nanos- tructured calcite obtained in a controlled multiphase process. J. Therm. Anal. Calorim., 119, 1323–1338. DOI: 10.1007/s10973-014-4217-1.
Wuklow M., Gerstlauer A., Nieken U., 2001. Modeling and simulation 1 of crystallization processes using parsival. Chem. Eng. Sci., 56, 2575–2588. DOI: 10.1016/S0009-2509(00)00432-2.
Go to article

Authors and Affiliations

Paweł Gierycz
1
Artur Poświata
1

  1. Warsaw University of Technology, Faculty of Chemical and Process Engineering, ul. Waryńskiego 1, 00-645 Warsaw, Poland
Download PDF Download RIS Download Bibtex

Abstract

A series of steps taken to determine a kinetic equation that describes hydrogenation of propene on nickel catalyst is presented in this study. Mixed factorial design approach, belongs to designing of experiments methods was used to plane experiments. The investigations showed that the method applied makes possible determination of the kinetic equation in a relatively fast and cheap manner since only a few measurement points is required. The equation obtained was verified experimentally and statistically. Both tests showed satisfactory precision of anticipated values of the process rate.
Go to article

Bibliography

Aaserud C., Hilmen A.-M., Bergene E.S.E., Schanke D., Holmena A., 2004. Hydrogenation of propene on cobalt Fischer–Tropsch catalysts. Catal. Lett., 94, 171–176. DOI: 10.1023/B:CATL.0000020541.28174.c7.
Ahmadigoltapeh, S., Mehranbod, N., Halimejani, H.Z., 2015. Propylene hydrogenation through structured and con- ventional catalyst beds: Experiment and modelling. J. Nat. Gas Sci. Eng., 27, 822–830. DOI: 10.1016/j.jngse.2015.09.030.
Brandao L., Fritsch D., Madeira LM., Mendes A.M., 2004. Kinetics of propylene hydrogenation on nanostructured palladium clusters. Chem. Eng. J., 103, 89–97. DOI: 10.1016/j.cej.2004.07.008.
Carturan G., Enzo S., Ganzerla R., Lenarda M., Zanoni R., 1990. Role of solid-state structure in propene hydro- genation with nickel catalysts. J. Chem. Soc. Faraday Trans., 86, 739–746. DOI: 10.1039/ft9908600739.
Esfe M.H.,. Rsotamian H, Shabani-Samghabadi A., Arani A.A.A., 2017. Application of three-level general fac- torial design approach for thermal conductivity of MgO/ water nanofluids. Appl. Therm. Eng., 127, 1194–1199. DOI: 10.1016/j.applthermaleng.2017.07.211.
Montgomery D.C., 2017. Design and analysis of experiments. 9th ed., Wiley.
Özbay N., Yargıç A.Ş., Yarbay-Şahin R.Z., Önal E., 2013. Full factorial experimental design analysis of reactive dye removal by carbon adsorption. J. Chem., 234904. DOI: 10.1155/2013/234904.
Pachulski A., Schödel R., Claus P., 2012. Kinetics and reactor modeling of a Pd-Ag/Al2O3 catalyst during selective hydrogenation of ethyne. Appl. Catal., A, 445–446, 107–120. DOI: 10.1016/j.apcata.2012.08.018.
Schweitzer NM., Hu B., Das U., Hacksung K., Greeley J., Curtiss L.A., Stair P.C., Miller J.T., Hock A.S., 2014. Propylene hydrogenation and propane dehydrogenation by a single-site Zn2+ on silica catalyst. ACS Catal., 4, 1091–1098. DOI: 10.1021/cs401116p.
Sen G.A., 2016. Application of full factorial experimental design and response surface methodology for chromite beneficiation by Knelson concentrator. Minerals, 6, 5. DOI: 10.3390/min6010005.
Szukiewicz M., Chmiel-Szukiewicz E., Kaczmarski K., Szałek A., 2019. Dead zone for hydrogenation of propylene atalyst pellets. Open Chem., 17, 295–301. DOI: 10.1515/chem-2019-0037.
Go to article

Authors and Affiliations

Adrian Szałek
1
Mirosław Szukiewicz
1
Elżbieta Chmiel-Szukiewicz
1

  1. Rzeszów University of Technology, Faculty of Chemistry, al. Powstańców Warszawy 6, 35-959 Rzeszów, Poland
Download PDF Download RIS Download Bibtex

Abstract

Poly(glycerol sebacate) (PGS) is a polyester that is particularly useful for tissue engineering appli- cations. Many researchers have focused on the application and characterization of materials made from PGS. Synthesis is often superficially described, and the prepolymer is not characterized before crosslinking. Considering the different functionality of each monomer (glycerine – 3, sebacic acid – 2), materials with a branched structure can be obtained before the crosslinking process. Branched struc- tures are not desirable for elastomers. In this work, method to obtain linear PGS resins is presented. Moreover, synthesis was optimized with the use of the Design of Experiments method for minimizing the degree of branching and maximizing the molecular weight. The process was described via mathe- matical models, which allows to the association of process parameters with product properties. In this work ca. 1kDa and less than 10% branched PGS resin was produced. This resin could be used to make very flexible elastomers because branching is minimized.
Go to article

Bibliography

Denis P., Wrzecionek M., Gadomska-Gajadhur A., Sajkiewicz P., 2019. Poly(glycerol sebacate)–poly(l-lactide) nonwovens towards attractive electrospun material for tissue engineering. Polymers, 11, 2113. DOI: 10.3390/polym 11122113.
Fernandes B.S., Carlos Pinto J., Cabral-Albuquerque E.C.M., Fialho R.L., 2015. Free-radical polymerization of urea, acrylic acid, and glycerol in aqueous solutions. Polym. Eng. Sci., 55, 1219–1229. DOI: 10.1002/pen.24081.
Gadomska-Gajadhur A., Wrzecionek M., Matyszczak G., Pie˛towski P., Wie˛cław M., Ruśkowski P., 2018. Optimiza- tion of poly(glycerol sebacate) synthesis for biomedical purposes with the design of experiments. Org. Process Res. Dev., 22, 1793–1800. DOI: 10.1021/acs.oprd.8b00306.
Gao J., Crapo P.M., Wang Y., 2006. Macroporous elastomeric scaffolds with extensive micropores for soft tissue engineering. Tissue Eng., 12, 917–925. DOI: 10.1089/ten.2006.12.917.
Godinho B., Gama N., Barros-Timmons A., Ferreira A., 2018. Enzymatic synthesis of poly(glycerol sebacate) pre- polymer with crude glycerol, by-product from biodiesel prodution. AIP Conference Proceedings, 1981, 020031. DOI: 10.1063/1.5045893.
Harris J.J., Lu S., Gabriele P., 2018. Commercial challenges in developing biomaterials for medical device devel- opment. Polym. Int., 67, 969–974. DOI: 10.1002/pi.5590.
Higuchi T., Kinoshita A., Takahashi K., Oda S., Ishikawa I., 1999. Bone regeneration by recombinant human bone morphogenetic protein-2 in rat mandibular defects. An experimental model of defect filling. J. Periodontology, 70, 1026–1031. DOI: 10.1902/jop.1999.70.9.1026.
Kafouris D., Kossivas F., Constantinides C., Nguyen N.Q., Wesdemiotis C., Patrickios C.S., 2013. Biosourced am- phiphilic degradable elastomers of poly(glycerol sebacate): synthesis and network and oligomer characterization. Macromolecules, 46, 622–630. DOI: 10.1021/ma3016882.
Kemppainen J.M., Hollister S.J., 2010. Tailoring the mechanical properties of 3D-designed poly(glycerol sebacate) scaffolds for cartilage applications. J. Biomed. Mater. Res. Part A, 94A, 9–18. DOI: 10.1002/jbm.a.32653.
Kharaziha M., Nikkhah M., Shin S.-R., Annabi N., Masoumi N., Gaharwar A.K., Camci-Unal G., Khademhosseini A., 2013. PGS:Gelatin nanofibrous scaffolds with tunable mechanical and structural properties for engineering cardiac tissues. Biomaterials, 34, 6355–6366. DOI: 10.1016/J.BIOMATERIALS.2013.04.045.
Kokubo S., Fujimoto R., Yokota S., Fukushima S., Nozaki K., Takahashi K., Miyata K., 2003. Bone regeneration by recombinant human bone morphogenetic protein-2 and a novel biodegradable carrier in a rabbit ulnar defect model. Biomaterials, 24, 1643–1651. DOI: 10.1016/S0142-9612(02)00551-3.
Kumar A., Khan A., Malhotra S., Mosurkal R., Dhawan A., Pandey M.K., Singh B.K., Kumar R., Prasad A.K., Sharma S.K., Samuelson L.A., Cholli A.L., Len C., Richards N.G.J., Kumar J., Haag R., Watterson A.C., Parmar V.S., 2016. Synthesis of macromolecular systems via lipase catalyzed biocatalytic reactions: applications and future perspectives. Chem. Soc. Rev., 45, 6855–6887. DOI: 10.1039/C6CS00147E.
Landim L.B., Pinto J.C., Cabral-Albuquerque E.C.M., Cunha S., Fialho R.L., 2018. Synthesis and characterization of copolymers of urea-succinic acid-ethylene glycol and copolymers of urea-succinic acid-glycerol. Polym. Eng. Sci. 58, 1575–1582. DOI: 10.1002/pen.24746.
Larsson A., Israelsson M., Lind F., Seemann M., Thunman H., 2014. Using ilmenite to reduce the tar yield in a dual fluidized bed gasification system. Energy Fuels, 28, 2632–2644. DOI: 10.1021/ef500132p.
Li C.J., Trost B.M., 2008. Green chemistry for chemical synthesis. PNAS, 105, 13197–13202. DOI: 10.1073/pnas.0804348105.
Li Y., Cook W.D., Moorhoff C., Huang W.-C., Chen Q.-Z., 2013. Synthesis, characterization and properties of biocompatible poly(glycerol sebacate) pre-polymer and gel. Polym. Int., 62, 534–47. DOI: 10.1002/pi.4419.
Liu G., Hinch B., Beavis A.D., 1996. Mechanisms for the transport of alpha,omega-dicarboxylates through the mitochondrial inner membrane. J. Biol. Chem., 271, 25338–25344. DOI: 10.1074/jbc.271.41.25338.
Liu L.L., Yi F.C., Cai W., 2012. Synthesis and shape memory effect of poly(glycerol-sebacate) elastomer. Adv. Mater. Res., 476–478, 2141–2144. DOI: 10.4028/www.scientific.net/AMR.476-478.2141.
Liu Q., Tian M., Ding T., Shi R., Feng Y., Zhang L., Chen D., Tian W., 2007. Preparation and characterization of a thermoplastic poly(glycerol sebacate) elastomer by two-step method. J. Appl. Polym. Sci., 103, 1412–19. DOI: 10.1002/app.24394.
Loh X.J., Abdul Karim A., Owh C., 2015, Poly(glycerol sebacate) biomaterial: synthesis and biomedical applica- tions. J. Mater. Chem. B, 3, 7641–7652. DOI: 10.1039/c5tb01048a.
Martina M., Hutmacher D.W., 2007. Biodegradable polymers applied in tissue engineering research: a review. Polym. Int., 56, 145–157. DOI: 10.1002/pi.2108.
Otera J., 1993. Transesterification. Chem. Rev., 93, 1449–1470. DOI: 10.1021/cr00020a004.
Rai R., Tallawi M., Grigore A., Boccaccini A.R., 2012. Synthesis, properties and biomedical applications of poly(glycerol sebacate) (PGS): A review. Prog. Polym. Sci., 37, 1051–1078. DOI: 10.1016/j.progpolymsci. 2012.02.001.
Ravichandran R., Venugopal J.R., Sundarrajan S., Mukherjee S., Ramakrishna S., 2011. Poly(glycerol seba- cate)/gelatin core/shell fibrous structure for regeneration of myocardial infarction. Tissue Eng. Part A, 17, 1363– 1373. DOI: 10.1089/ten.tea.2010.0441.
Ravichandran R., Venugopal J.R., Sundarrajan S., Mukherjee S., Sridhar R., Ramakrishna S., 2012. Minimally invasive injectable short nanofibers of poly(glycerol sebacate) for cardiac tissue engineering. Nanotechnology, 23, 385102. DOI: 10.1088/0957-4484/23/38/385102.
Sant S., Hwang C.M., Lee S.-H., Khademhosseini A., 2011. Hybrid PGS-PCL microfibrous scaffolds with improved mechanical and biological properties. J. Tissue Eng. Regener. Med., 5, 283–291. DOI: 10.1002/term.313.
Saudi A., Rafienia M., Zargar Kharazi A., Salehi H., Zarrabi A., Karevan M., 2019. Design and fabrication of poly (glycerol sebacate)-based fibers for neural tissue engineering: synthesis, electrospinning, and characterization. Polym. Adv. Technol., 30, 1427–1440. DOI: 10.1002/pat.4575.
Slavko E., Taylor M.S., 2017. Catalyst-controlled polycondensation of glycerol with diacyl chlorides: linear polyesters from a trifunctional monomer. Chem. Sci., 8, 7106–7111. DOI: 10.1039/C7SC01886J.
Wang Y., Ameer G.A., Sheppard B.J., Langer R., 2002. A tough biodegradable elastomer. Nat. Biotechnol., 20, 602–606. DOI: 10.1038/nbt0602-602.
Wrzecionek M., Ruśkowski P., Gadomska-Gajadhur A., Gadomska-Gajadhur A., 2021. Mathematically described preparation process of poly(glycerol succinate) resins and elastomers—meeting science with industry. Polym. Adv. Technol., 32, 2042–2051. DOI: 10.1002/pat.5233.
Xu B., Cook W.D., Zhu C., Chen Q., 2016. Aligned core/shell electrospinning of poly(glycerol sebacate)/poly(l- lactic acid) with tuneable structural and mechanical properties. Polym. Int., 65, 423–429. DOI: 10.1002/pi.5071.
Go to article

Authors and Affiliations

Michał Wrzecionek
1
Joanna Howis
1
Paulina H. Marek
1 2
Paweł Ruśkowski
1
ORCID: ORCID
Agnieszka Gadomska-Gajadhur
1
ORCID: ORCID

  1. Warsaw University of Technology, Faculty of Chemistry, Noakowskiego 3, 00-664 Warsaw, Poland
  2. University of Warsaw, Faculty of Chemistry, Pasteura 1, 02-093 Warsaw, Poland
Download PDF Download RIS Download Bibtex

Abstract

The production of ethyl oleate, by homogenous acid esterification of oleic acid with ethanol, have discussed experimentally and via computational simulation in a plug flow reactor. An innovative simulation model has developed to predict the esterification reaction performance in an ideal plug flow reactor. The amount of H2SO4 acid catalyst, the initial molar ratio of alcohol to oleic acid, ethanol concentration, reaction temperature, and esterification time have examined their effects on ethyl oleate production and the conversion of oleic acid. Then the simulation extended to examine the esterification reaction kinetics and determine the reaction rate coefficients. The simulation results demonstrate that the increasing of H2SO4 acid, initial molar ratio of ethanol to oleic acid, ethanol concentration, and reaction temperature improved the productivity of the ethyl oleate and reduced the reactor space-time. The kinetics results illustrated that the reaction sensitivity to the temperature unchanging by using higher ethanol concentration and alcohol to oleic acid initial ratio. Lastly, the experimental yields at different conditions were slightly higher from those simulating with average values of 93.62 and 92.29%, respectively, indicating that the phenomenon of back-mixing cannot be ignored in esterification reactors, especially with a relatively high retention time within the reactor.
Go to article

Bibliography

Abbas A.S., Abbas R.N., 2013a. Kinetic study and simulation of oleic acid esterification over prepared NaY zeolite catalyst. Iraqi J. Chem. Pet. Eng. 14 (4), 35–43.
Abbas A.S., Abbas S.M., 2013b. Kinetic study and simulation of oleic acid esterification in different type of reactors. Iraqi J. Chem. Pet. Eng. 14 (2), 13–20.
Abbas A.S., Abbas S.M., 2016. Giresun Taguchi experimental design, optimization and kinetic study of biodiesel production from oleic acid, X th International Statistics Days Conference. Giresun University, Giresun, 743–754.
Abbas A.S., Albayati T.M., Alismaeel Z.T., Doyle, A.M., 2016. Kinetics and mass transfer study of oleic acid esterification over prepared nanoporous HY zeolite. Iraqi J. Chem. Pet. Eng., 17 (1), 47–60.
Abbas A.S., Hussein M.Y., Mohammed H.J., 2019. Preparation of solid catalyst suitable for biodiesel production. Plant Arch., 19 (2), 3853–3861.
Abbas A.S., Abbas R.N., 2015. Preparation and characterization of NaY zeolite for biodiesel production. Iraqi J. Chem. Pet. Eng., 16 (2), 19–29.
Alfattal A.H., Abbas A.S., 2019. Synthesized 2nd generation zeolite as an acid-catalyst for esterification reaction. Iraqi J. Chem. Pet. Eng. 20 (3), 67–73. DOI: 10.31699/IJCPE.2019.3.9.
Alismaeel Z.T., Abbas A.S., Albayati T.M., Doyle A.M., 2018. Biodiesel from batch and continuous oleic acid esterification using zeolite catalysts. Fuel, 234, 170–176. DOI: 10.1016/j.fuel.2018.07.025.
Alnaama A.A., 2017. Synthesis and characteriazation of nanacrystalline ZSM-5 and ZSM-5/MCM-41 composite zeolite for biodiesel production. Ph.D. Thesis, University of Baghdad.
Al-Saadi A., Mathan B., He Y., 2020. Esterification and transesterification over SrO- ZnO/Al2O3 as a novel bifunctional catalyst for biodiesel production. Renew. Energy, 158, 388–399. DOI: 10.1016/j.renene.2020.05.171.
Alshahidy B.A., Abbas A.S., 2020. Preparation and modification of 13X zeolite as a heterogeneous catalyst for esterification of oleic acid. AIP Conference Proceedings, 2213, 020167. DOI: 10.1063/5.0000171.
Aranda D.A.G., Santos R.T.P., Tapanes N.C.O., Ramos A.L.D., Antunes O.A.C., 2008. Acid-catalyzed homo- geneous esterification reaction for biodiesel production from palm fatty acids. Catal. Lett. 122, 20–25. DOI: 10.1007/s10562-007-9318-z.
Beula C., Sai P.S.T., 2013. Kinetics of esterification of palmitic acid with ethanol- optimization using statistical design of experiments. Int. J. Chem. Eng. Appl. 4, 388–392. DOI: 10.7763/ijcea.2013.v4.331.
Bornscheuer U., 2018. Lipid modification by enzymes and engineered microbes. Elsevier Inc. DOI: 10.1016/c2016-0-04104-9.
Bouguerra Neji S., Trabelsi M., Frikha M.H., 2009. Esterification of fatty acids with short-chain alcohols over commercial acid clays in a semi-continuous reactor. Energies 2, 1107–1117. DOI: 10.3390/en20401107.
Chaemchuen S., Heynderickx P.M., Verpoort F., 2020. Kinetic modeling of oleic acid esterification with UiO-66: from intrinsic experimental data to kinetics via elementary reaction steps. Chem. Eng. J. 394, 124816. DOI: 10.1016/j.cej.2020.124816.
Chakraborty R., Chowdhury R.D., 2013. Fish bone derived natural hydroxyapatite-supported copper acid cat- alyst: Taguchi optimization of semibatch oleic acid esterification. Chem. Eng. J. 215–216, 491–499. DOI: 10.1016/j.cej.2012.11.064.
Chung K.H., Park B.G., 2009. Esterification of oleic acid in soybean oil on zeolite catalysts with different acidity. J. Ind. Eng. Chem., 15, 388–392. DOI: 10.1016/j.jiec.2008.11.012.
da Silva M.J., Cardoso A.L., 2013. Heterogeneous tin catalysts applied to the esterification and transesterification reactions. J. Catal. 2013, 1–11. DOI: 10.1155/2013/510509.
Dan L., Laposata M., 1997. Ethyl palmitate and ethyl oleate are the predominant fatty acid ethyl esters in the blood after ethanol ingestion and their synthesis is differentially influenced by the extracellular concentrations of their corresponding fatty acids. Alcohol.: Clin. Exp. Res., 21, 286–292. DOI: 10.1111/j.1530-0277.1997.tb03762.x.
dos Santos R.C.M., Gurgel P.C., Pereira N.S., Breves R.A., de Matos P.R.R., Silva L.P., Sales M.J.A., Lopes R. de V.V., 2020. Ethyl esters obtained from pequi and macaúba oils by transesterification with homogeneous acid catalysis. Fuel 259, 116206. DOI: 10.1016/j.fuel.2019.116206.
Doyle A.M., Albayati T.M., Abbas A.S., Alismaeel Z.T., 2016. Biodiesel production by esterification of oleic acid over zeolite Y prepared from kaolin. Renewable Energy, 97, 19–23. DOI: 10.1016/j.renene.2016.05.067.
Doyle A.M., Alismaeel Z.T., Albayati T.M., Abbas A.S., 2017. High purity FAU-type zeolite catalysts from shale rock for biodiesel production. Fuel, 199, 394–402. DOI: 10.1016/j.fuel.2017.02.098.
Froment G.F., Bischoff K.B., De Wilde J., 2011. Chemical reactor analysis and design. 3rd ed. John Wiley & Sons, Inc.
Gang L., Wenhui P., 2010. Esterifications of carboxylic acids and alcohols catalyzed by Al2(SO4)3.18H2O under solvent-free condition. Kinet. Catal. 51, 559–565. DOI: 10.1134/S0023158410040154.
Gómez-Castro F.I., Gutiérrez-Antonio C., Romero-Izquiero A.G., Morales-Rodríguez R., Segovia-Hernández J.G., 2016. Mass and energy integration for the supercritical process for biodiesel production and a bioethanol dehy- dration train. Comput. Aided Chem. Eng., 38, 487–492. DOI: 10.1016/B978-0-444-63428-3.50086-2.
Gültekin S., Kalbekov A., 2017. Effect of back mixing on the performance of tubular-flow reactors. Int. J. Dev. Res., 7 (9), 15684–15685.
Harriott P., 2002. Chemical reactor design. CRC Press, New York. DOI: 10.1201/9780203910238.
Hernandez E.M., 2011. Processing of omega-3 oils. In: Hernandez E.M., Hosokawa M. (Eds.), omega-3 oils: Applications in functional foods. Elsevier Inc., 107–128. DOI: 10.1016/B978-1-893997-82-0.50008-6.
Higham D.J., 2008. Modeling and simulating chemical reactions. SIAM Rev., 50, 347–368. DOI: 10.1137/060666457.
Karacan F., 2015. Steady-state optimization for biodiesel production in a reactive distillation column. Clean Technol. Environ. Policy, 17, 1207–1215. DOI: 10.1007/s10098-015-0964-3.
Khan A.K., 2002. Research into biodiesel kinetics and catalyst development. PhD thesis. University of Queensland.
Kiss A.A., Bildea, C.S., 2012. A review of biodiesel production by integrated reactive separation technologies. J. Chem. Technol. Biotechnol., 87, 861–879. DOI: 10.1002/jctb.3785.
Levenspiel O., 1999. Chemical reaction engineering. 3rd ed. John Wiley & Sons, Inc., New York.
Levenspiel O., Bischoff K.B., 1959. Backmixing in the design of chemical reactors. Ind. Eng. Chem., 51, 1431–1434. DOI: 10.1021/ie50600a023.
Liu R., Wang X., Zhao X., Feng P., 2008. Sulfonated ordered mesoporous carbon for catalytic preparation of biodiesel. Carbon, 46, 1664–1669. DOI: 10.1016/j.carbon.2008.07.016.
Machado G.D., Pessoa F.L.P., Castier D., Aranda D.A.G, Ferreira-Pinto L., Giufrida W.M., Cabral V.F., Cardozo- Filho L., 2015. Computer simulation of biodiesel production by hydro-esterification. XX Congresso Brasileiro de Engenharia Química, 11119–11126. DOI: 10.5151/chemeng-cobeq2014-0019-27506-160049.
Majeed N.S., Saleh A.A., 2016. Synthesis and characterization of nanocrystalline micro- mesoporous ZSM-5 / MCM-41 Composite Zeolite. Iraqi J. Chem. Pet. Eng., 17 (1), 71–82.
Mann U., 2009. Principles of chemical reactor analysis and design: New tools for industrial chemical reactor operations. 2nd ed. John Wiley & Sons, Inc. DOI: 10.1002/9780470385821.
Mod R.R., Magne F.C., Sumrell G., Koos R.E., 1977. Lubricants and lubricant additives: III. Performance char- acteristics of some thioacetate, phosphorodithioate, and hexachlorocyclopentadiene derivatives of stearic acid amides and esters. JAOCS, 54, 589–591. DOI: 10.1007/BF03027643.
Oliveira C.F., Dezaneti L.M., Garcia F.A.C., de Macedo J.L., Dias J.A., Dias S.C.L., Alvim K.S.P., 2010. Ester- ification of oleic acid with ethanol by 12-tungstophosphoric acid supported on zirconia. Appl. Catal., A, 372, 153–161. DOI: 10.1016/j.apcata.2009.10.027.
Prates C.D., Ballotin F.C., Limborço H., Ardisson J.D., Lago R.M., Teixeira A.P. de C., 2020. Heterogeneous acid catalyst based on sulfated iron ore tailing for oleic acid esterification. Appl. Catal., A, 600, 117624. DOI: 10.1016/j.apcata.2020.117624.
Raia R.Z., da Silva L.S., Marcucci S.M.P., Arroyo P.A., 2017. Biodiesel production from Jatropha curcas L. oil by simultaneous esterification and transesterification using sulphated zirconia. Catal. Today, 289, 105–114. DOI: 10.1016/j.cattod.2016.09.013.
Refaat A.A., 2011. Biodiesel production using solid metal oxide catalysts. Int. J. Environ. Sci. Technol., 8, 203–221. DOI: 10.1007/BF03326210.
Sarkar A., Ghosh S.K., Pramanik P., 2010. Investigation of the catalytic efficiency of a new mesoporous catalyst SnO2/WO3 towards oleic acid esterification. J. Mol. Catal. A: Chem., 327, 73–79. DOI: 10.1016/j.molcata.2010.05.015.
Scragg A.H., 2009. Biofuels: Production, application and development. CABI Publishing.
Sena S.R.C., Barros Neto E.L., Pereira C.G., 2019. Evaluation of the lubrication of ethyl oleate and ethyl octanoate as gasoline additive. Braz. J. Pet. Gas, 13, 111–118. DOI: 10.5419/bjpg2019-0011.
Takagaki A., Toda M., Okamura M., Kondo J.N., Hayashi S., Domen K., Hara M., 2006. Esterification of higher fatty acids by a novel strong solid acid. Catal. Today, 116, 157–161. DOI: 10.1016/j.cattod.2006.01.037.
Tang J., Liang X., 2015. Highly efficient procedure for biodiesel synthesis using polypyrrole functionalized by sulfonic acid. Kinet. Catal., 56, 323–328. DOI: 10.1134/S002315841503009X.
Tankov I., Yankova R., 2019. DFT analysis, reaction kinetics and mechanism of esterification using pyridinium nitrate as a green catalyst. J. Mol. Liq., 277, 241–253. DOI: 10.1016/j.molliq.2018.12.087.
van Rossum G., 1995. Python tutorial. CWI, 1–65.
Vieira S.S., Magriotis Z.M., Graça I., Fernandes A., Ribeiro M.F., Lopes J.M.F.M., Coelho S.M., Santos N.A.V., Saczk A.A., 2017. Production of biodiesel using HZSM-5 zeolites modified with citric acid and SO2−/La2O3. Catal. Today, 279, 267–273. DOI: 10.1016/j.cattod.2016.04.014.
Vieira. S.S., Magriotis Z.M., Filipa M., Graça I., Fernandes A., Manuel J., Lopes F.M., Coelho S.M., Santos Ap. N., V., Saczk Ap.A., 2015. Microporous and mesoporous materials use of HZSM-5 modified with citric acid as acid heterogeneous catalyst for biodiesel production via esterification of oleic acid. Microporous Mesoporous Mater., 201, 160–168. DOI: 10.1016/j.micromeso.2014.09.015.
Yin P., Chen L., Wang Z., Qu R., Liu X., Xu Q., Ren S., 2012. Biodiesel production from esterification of oleic acid over aminophosphonic acid resin D418. Fuel, 102, 499–505. DOI: 10.1016/j.fuel.2012.05.027.
Zhou K., Chaemchuen S., 2017. Metal-organic framework as catalyst in esterification of oleic acid for biodiesel production. Int. J. Environ. Sci. Dev., 8, 251–254. DOI: 10.18178/ijesd.2017.8.4.957.
Go to article

Authors and Affiliations

Suondos K.A. Barno
1
Sarmad A. Rashid
2
Ammar S. Abbas
2

  1. Presidency of the University of Baghdad, Baghdad, Iraq
  2. Chemical Engineering Department, College of Engineering, University of Baghdad, Baghdad, Iraq

Instructions for authors

All manuscripts submitted for publication in Chemical and Process Engineering: New Frontiers must comprise a description of original research that has neither been published nor submitted for publication elsewhere.

The content, aim and scope of the proposals have to comply with the main topics of the journal, i.e. discuss at least one of the four main areas, namely:
• New Advanced (Nano) Materials
• Environment & Water Processing (including circular economy)
• Biochemical & Biomedical Engineering (including pharmaceuticals)
• Climate & Energy (including energy conversion & storage, electrification, decarbonization)

Chemical and Process Engineering: New Frontiers publishes: i) experimental and theoretical research papers, ii) short communications, iii) critical reviews, and iv) perspective articles. Each publication form is peer-reviewed by at least two independent referees.

New Submissions

Manuscripts are submitted for publication via Editorial System. When writing a manuscript, you may choose to submit it as a single Word file to be used in the refereeing process. The manuscript needs to be written in a clear way. The minimum requirements are:
• Please use clear fonts, at least 12 points large, with at least 1.5-line spacing.
• Figures should be placed in relevant places within the manuscript. All figures and tables should be numbered and provided with appropriate caption and legend, if necessary.


Language requirements

• Use Simple Past to talk about your experiment and your results as they were finished before you wrote the paper. Use Simple Past to describe what you did.
Example: Two samples were taken. Temperature increased to 200K at the end of the process.
• Use Simple Present to refer to figures and tables.
Example: Table 2 shows nitrogen concentration changes in the process.
• Use Simple Present to talk about your conclusions. You move here from describing your results to stating what is generally true.
Example: The process is caused by changes of nitrogen concentration.
• Capitalise words like ‘Table 2’, ‘Equation 11’.
• If a sentence is longer than three lines, break down your writing into logically divided parts (paragraphs). Start a new paragraph to discuss a new concept.
• Check noun/verb agreement (singular/plural).
• It is fine to choose either British or American English but you should avoid mixing the two.
• Avoid empty language (it is worth pointing out that, etc.).



Revised Submission

After the first revision, authors will be requested to put their paper in the correct format, using the below guidelines and template for articles.


Manuscript outline

1. Header details
a. Title,
b. Names (first name and further initials) and surnames of authors,
c. Institution(s) (affiliation),
d. Address(es) of authors,
e. ORCID number of all authors.
f. Information about the corresponding author: name and surname, email address.

2. Abstract – should contain a short summary of the proposed paper. In the maximum of 200 words the authors should present the main assumptions, results and conclusions drawn from the presented study.

3. Keywords – up to 5 characteristic keyword items should be provided.

4. Text
a. Introduction. In this part, the rationale for research and formulation of the scientific problem should be included and supported by a concise review of recent literature.
b. Main text. It should contain all important elements of the scientific investigations, such as presentation of experimental setup, mathematical models, results and their discussion. This part may be divided into the following sections: Methods, Results, Discussion.
c. Conclusions. The major conclusions can be put forward in a concise style in a separate chapter. A presentation of conclusions from the reported research work accompanied by a short commentary is also acceptable.
d. Figures: drawings, diagrams and photographs can be in colour and should be located in appropriate places in the manuscript. Their form should be of a vector or raster type with the minimum resolution of 900 dpi. In addition, all figures, including drawings, graphs and photos should be uploaded in a separate file via Editorial System in one of the following formats: bmp, tiff, jpg or eps. For editorial reasons, graphic elements created with MS Word or Excel will not be accepted. They should be saved as image files in the source program. Screen shots will not be accepted. The basic font size of letters used in figures should be at least 10 pts after adjusting graphs to the final size.
e. Tables should be made according to the format shown in the template.
f. All figures and tables should be numbered and provided with an appropriate caption and legend, if necessary. They have to be properly referenced to and commented in the text of the manuscript.

5. List of symbols should be accompanied by their units

6. Acknowledgements may be included before the list of literature references

7. Literature citations
The method of quoting literature source in the manuscript depends on the number of its authors:
single author – their surname and year of publication should be given, e.g. Marquardt (1996) or (Marquardt, 1996),
two authors – the two surnames separated by the conjunction “and” with the publication year should be given, e.g. Charpentier and McKenna (2004) or (Charpentier and McKenna, 2004),
three and more authors – the surname of the first author followed by the abbreviation “et al.” and year of publication should be given, e.g. Bird et al. (1960) or (Bird et al., 1960).

In the case of citing more sources in one bracket, they should be listed in alphabetical order using semicolon for separation, e.g. (Bird et al., 1960; Charpentier and McKenna, 2004; Marquardt, 1996). Should more citations of the same author(s) and year appear in the manuscript then letters “a, b, c, ...” should be successively applied after the publication year.

Bibliographic data of the quoted literature should be arranged at the end of the manuscript in alphabetical order of surnames of the first author. It is obligatory to indicate the DOI number of those literature items, whose numbers have already been assigned. Journal titles should be specified by typing their right abbreviations or, when in doubts, according to the Science and Engineering Journal Abbreviations.

Examples of citation for:

Articles
Charpentier J. C., McKenna T. F., 2004. Managing complex systems: some trends for the future of chemical and process engineering. Chem. Eng. Sci., 59, 1617-1640. DOI: 10.1016/j.ces.2004.01.044.
Information from books (we suggest adding the page numbers where the quoted information can be found)
Bird R. B., Stewart W.E., Lightfood E.N., 2002. Transport Phenomena. 2nd edition, Wiley, New York, 415-421.
Chapters in books
Hanjalić K., Jakirlić S., 2002. Second-moment turbulence closure modelling, In: Launder B.E., Sandham N.D. (Eds.), Closure strategies for turbulent and transitional flows. Cambridge University Press, Cambridge, 47-101.
Conferences
ten Cate A., Bermingham S.K., Derksen J.J., Kramer H.M.J., 2000. Compartmental modeling of an 1100L DTB crystallizer based on Large Eddy flow simulation. 10th European Conference on Mixing. Delft, the Netherlands, 2-5 July 2000, 255-264.



Cover letter


Authors are kindly asked to provide a cover letter which signifies the novelty and most important findings of the manuscript as well as the significance to the field.


Author contributions

During submission, authors will be asked to provide the individual contributions to the paper using the relevant CRediT roles: Conceptualization; Data curation; Formal analysis; Funding acquisition; Investigation; Methodology; Project administration; Resources; Software; Supervision; Validation; Visualization; Roles/Writing - original draft; Writing - review & editing.


Suggested Reviewers

Authors are kindly requested to include a list of 4 potential reviewers for their manuscript, with complete contact information. Suggested reviewers may not reside in the same country as the corresponding author and remain subject to the Editors' discretion in appointing manuscripts for review.


Payments

Starting from 2014 a principle of publishing articles against payment is introduced, assuming non-profit making editorial office. According to the principle, authors or institutions will have to cover the expenses amounting to 1500 PLN netto (excl. VAT) per published article. The above amount will be used to supplement the limited financial means received from the Polish Academy of Sciences for the editorial and publishing expenses. The method of payment will be indicated in an invoice sent to the authors or institutions after acceptance of their manuscripts to be published.

Publication Ethics Policy

ETHICAL PRINCIPLES

Editors of the "Chemical and Process Engineering: New Frontiers" pay attention to maintain ethical standards in scientific publications and undertake any possible measure to counteract neglecting the standards. Papers submitted for publication are evaluated with respect to reliability, conforming to ethical standards and the advancement of science. Principles given below are based on COPE's Best Practice Guidelines for Journal Editors, which may be found at:
http://publicationethics.org/files/u2/Best_Practice.pdf

Authors’ duties

Authorship
Authorship should be limited to persons, who markedly contributed to the idea, project, realization and interpretation of results. All of them have to be listed as co-authors. Other persons, who affected some important parts of the study should be listed or mentioned as co-workers. Author should be certain that all co-authors were enlisted, saw and accepted final version of the paper and agreed upon its publication.

Disclosure and conflict of interests
Author should disclose all sources of financing of his/her study, the input of scientific institutions, associations and other subjects and all important conflicts of interests that might affect results and interpretation of the study.

Standards in reporting
Authors of papers based on original studies should present precise description of performed work and objective discussion on its importance. Source data should be accurately presented in the paper. The paper should contain detailed information and references that would enable others to use it. False or intentionally not true declarations are not ethical and are not accepted by the editors.

Access to and storage of data
Authors may be asked for providing raw data used in the paper for editorial assessment and should be prepared to store them within the reasonable time period after publication.

Multiple, unnecessary and competitive publications
As a rule author should not publish papers describing the same studies in more than one journal or primary publication. Submission of the same paper to more than one journal at the same time is not ethical and prohibited.

Confirmation of sources
Author should cite papers that affected the creation of submitted manuscript and every time he/she should confirm the use of other authors’ work.

Important errors in published papers
When author finds an important error or inaccuracy in his/her paper, he/she is obliged to inform Editorial Office about this as soon as possible.

Originality and plagiarism
Author may submit only original papers. He/she should be certain that the names of authors referred to in the paper and/or fragments of their texts are properly cited or mentioned.

Ghostwriting
Ghost writing/guest authorship are manifestation of scientific unreliability and all such cases will be revealed including notification of appropriate subjects. Signs of scientific unreliability, especially violation of ethical principles in science will be documented by the Editorial Office.


Duties of the Editorial Office


Editors’ duties
Editors know the rules of journal editing including the procedures applied in case of uncovering non-ethical practices.

Decisions on publication
Editor-in Chief is obliged to apply present legal status as to defamation, violation of author’s rights and plagiarism and bears the responsibility for decisions. He/she may consult thematic editors and/or referees in that matter.

Selection of referees
Editorial Office provides appropriate selection of referees and takes care about appropriate course of peer –reviewing (the review has to be substantive).

Confidentiality
Every member of editorial team is not allowed to disclose information about submitted paper to any person except its author, referees, other advisors and editors.

Discrimination
To counteract discrimination the Editorial Office obeys the legally binding rules.

Disclosure and conflict of interests
Not published papers or their fragments cannot be used in the studies of editorial team or ref-erees without written consent of the author.


Referees' duties

Editorial decisions

Referee supports Editor-in-Chief in taking editorial decisions and may also support author in improving the paper.

Back information
In case a selected referee is not able to review the paper or cannot do it in due time period, he/she should inform secretary of the Editorial Office about this fact.

Objectivity standards
Reviews should be objective. Personal criticism is inappropriate. Referees should clearly ex-press their opinions and support them with proper arguments.

Confidentiality
All reviewed papers should be dealt with as confidential. They should not be discussed or revealed to persons other than the secretary of the Editorial Office.

Anonymity
All reviews should be made anonymously and the Editorial Office does not disclose names of the authors to referees.

Disclosure and conflict of interests
Confidential information or ideas resulting from reviewing procedure should be kept secret and should not be used to gain personal benefits. Referees should not review papers, which might generate conflict of interests resulting from relationships with the author, firm or institution involved in the study.

Confirmation of sources
Referees should indicate publications which are not referred to in the paper. Any statement that the observation, source or argument was described previously should be supported by appropriate citation. Referee should also inform the secretary of the Editorial Office about significant similarity to or partial overlapping of the reviewed paper with any other published paper and about suspected plagiarism.



This page uses 'cookies'. Learn more