The present article studies the properties of the phrase Como si no hubiera (un) mañana (‘As if there were no tomorrow’), which more frequently occurs in European Spanish than in other diatopic varieties of that language. As it is shown in the article, the phrase modifies verbs and verbal predicates, being able to perform intensifying quantification.

This article is devoted to the German classes of particles: Gradpartikel (degree particle) and Fokuspartikel (focus particle), which are assigned divergent contents in different grammars and lexicons. In addition to this, a problem with didactic implications is the inconsistency of terminology. For example, Helbig/Buscha (2001) apply the term Gradpartikel to expressions that Hentschel/Weydt (2013) classify as Fokuspartikel. Engel (2009), on the other hand, refers to the expressions as Gradpartikel, which in Hentschel/Weydt (2013) represent the classes Fokuspartikel and Intensivpartikel. There are more similar inconsistencies in the literature with regard to class names and the inclusion of particles within them. The aim of this article is to revise the classification criteria and analyse the distinguishing characteristics of these classes and to put the terminology in order. The choice of terms in this article was determined by the primary function of the class: Fokuspartikel is named according to the function of focusing attention on something (German: fokussieren), while Gradpartikel is named according to the function of reinforcing (German: gradieren).

The present article demonstrates that languages tend to contain dispersals – a subtype of conative calls used to chase animals – that are built around voiceless sibilants. This tendency is both quantitative (i.e., voiceless-sibilant dispersals are common across languages and in a single language) and qualitative (i.e., sibilants contribute very significantly to the phonetic substance of such dispersals). This fact, together with a range of formal similarities exhibited by voiceless-sibilant dispersals encapsulated by the pattern [kI/Uʃ] suggests that the presence of voiceless sibilants in dispersals is not arbitrary. Overall, voiceless-sibilant dispersals tend to comply with the general phonetic profile associated with the prototype of CACs and dispersals, postulated recently in scholarship, thus corroborating the validity of this prototype.

Presented paper deals with the morphological category of aspect in Cantonese. Given the lack of a morphological category of tense in Cantonese, aspect holds a particular position in this system, as it is the sole morphological means expressing temporal relations. The aim of the paper is to present the functioning of the various aspects of Cantonese, both perfective and imperfective, based on the theoretical framework presented beforehand, which draws on the previous achievements of linguists in this field. The second section presents what specific morphological means are used to express the category of aspect in Cantonese, which is then followed by a brief discussion of the relation between resultative verb compounds and the perfective aspect. The last, and by far the largest section, presents corpus material which exemplifies the use of different aspect markers. The paper is an attempt to respond to the hitherto lack of consensus among Sinologists about the number as well as the types of aspects that occur in Cantonese.

The paper aims to test a hypothesis of introducing free speech in Polish translations instead of censored renderings typical of post-World War II reality after 1989 when communists lost the parliamentary elections (4th June) and stopped ruling Poland. The new political reality of a democratic system was reasserted by abolishing the censorship apparatus in 1990.
The analysis is based on articles from a magazine Forum. Przegląd Prasy Światowej, which are Polish translations of 10 source texts (STs) - selected articles concerning Polish issues from The New York Times. The STs and their Polish translations have been compared in detail to be able to evaluate the target texts (TTs) according to their correspondence with the STs.
In lieu of the censorship rule of hiding unwanted content and manipulating the audience, also with the propaganda language ( Newspeak), after 1990, the only remaining type of information flow blockage was self-censorship or superiors’ interference. The analysis will discover how topics changed, what happened to the language of propaganda, how the contents of STs are revealed in translations, and what translation techniques are applied in the process of transferring the ST message. The questions posed are, first, how accurate the translations after 1990 are, and second, what reasons might have occurred to have avoided the publication of some contents.
The analysis will be the basis for evaluating translators’ ethics in ST content delivery by reference to Andrew Chesterman (1997, 2001, 2018), Anthony Pym (2001, 2012), Jeremy Munday (2012), Juliane House (2015), and others.

The paper presents the most overall project of Hungarian dialectology of the past few decades and deals with the partial result of its sociolinguistic survey. The interviews analysed were recorded in Western Hungary as part of the New General Atlas of Hungarian Dialects project between 2007 and 2012. The project, funded by the Hungarian Academy of Sciences and organized by the Geolinguistics Research Group of the Eötvös Loránd University, asked the participants about sociolinguistic issues at several data collection sites in the Hungarian language area, in addition to surveying dialectological phenomena. For example: Do you speak dialects here in this town? Do they speak better here than in the neighboring settlements? Do you speak in the same way in a city or official place as at home, in a family circle? Have you ever been mocked because of your dialect speech? Given that tens of thousands of hours of the recordings have not yet been processed in a systematic and comprehensive way, the first half of the study provides numerical and detailed data on how the planned program of the research group was realized in practice regarding, for the time being, the Western Hungarian data collection sites. The second half of the study presents partial results on the language and dialect awareness, attitudes and use of the respondents by analysing the sociolinguistic interviews recorded in this area. The study provides a more accurate description of the specifics in the archive of the New General Atlas of Hungarian Dialects project, as well as what the recorded data reveal on the linguistic mentality of the Western Hungarian speech community in the beginning of the 21st century. This is just one of the numerous research topics offered by the enormous archive.

Applying frame semantics, usage-based construction grammar, and quantitative corpus-based methodology, this article seeks to explore the nature of the extraposed construction with past participles complemented by that-clauses. To this end, the author extracts the occurrences of the It BE V_en that-construction from the Corpus of Contemporary American English (COCA), determines its structural, semantic, distributional, and discourse-functional features, and identifies verbs that are strongly associated with the construction in question. The study meaningfully contributes to a growing body of research on it-extraposition by conducting a qualitative and quantitative analysis of one of its variants, a grammatical pattern with past participles that has not been hitherto investigated in much detail from a quantitative corpus- based perspective.

This paper investigates left-dislocated free relatives in Old English. On the theoretical level, it contributes to the ongoing discussion on the syntax of free relatives. It confirms a sharp distinction between wh- free relatives and demonstrative free relatives. The former type favours the Comp analysis, whereas the latter class is amenable to both the Comp and Head analyses. On the empirical level, it provides evidence that the Comp analysis with wh- pronouns is selected mainly on the basis of pied piping/stranding facts, while case marking regulates the choice of an appropriate analysis with demonstrative free relatives with þe. This corpus-based study also offers some quantitative information on the frequent patterns and cases commonly found in them.

The present paper is an empirical, corpus-based study of the Polish translations of Shakespeare’s agentive neologisms in -er in the nineteenth and twentieth centuries. The inspiration for the analysis was Kalaga’s book Nomina Agentis in the Language of Shakespearean Drama (2016), where the author selects 39 Shakespeare’s agentive neologisms in - er. The paper surveys qualitative and quantitative tendencies of translation techniques adopted by nineteenth and twentieth-century translators occurring in the corpus placed against the context of general discussion on the translation of neologisms. A brief discussion concerning word formation processes with the suffix - er in the current and Early Modern English systems of word formation precedes the analysis.

The paper compares the employment of the definite article in the Gothic version of the Gospel of Luke and in its Greek counterpart which served as the basis for the Gothic translation. Although the Gothic text is usually said to be a word-for-word reflection of the Greek text, we demonstrate that just like in the case of the Gospel of Matthew and the Gospel of John, which were of concern in our previous studies, there are enormous differences between the two languages especially in the domain of the definite article, not only in terms of amount but also in terms of the cases used – nominative, genitive, dative or accusative.

Many legal texts are produced in repetitive and standardised communication situations; they are therefore subject to unification and are consequently characterised by formulaicity. Formulaicity can be regarded not only as a significant but also as a constitutive textual property. The aim of this article is to attempt to present formulaicity as a textual property and descriptive category of legal texts and to describe its characteristics both at the level of text structure and at the level of formulation, using the example of the German text type 'Gesetzestext'.

The article studies the use of linking adverbials (LAs) in English-medium articles by Polish and Anglophone scholars representing medicine and psychology, attempting to reveal discipline- and culture-specific preferences in the choice, frequency and distribution of linkers. The results show that disciplinary and linguacultural constraints impact on LA use. Variation across disciplines reflects differences in the knowledge base and its rhetorical management, as there are significantly more LAs in psychology than in medicine. Cross-cultural variation determines the choice of specific LA (sub)categories in line with the authors’ linguacultural backgrounds, target readers and publication contexts. These findings can raise academic writers’ awareness of culture- and discipline-driven aspects of adverbial cohesion in English academic prose.

This study presents a potential solution to a long-standing question of the phonological representation of short diphthongs. Their mere existence in Old English, the West-Saxon dialect, in particular, has been a matter of great controversy among historical phonologists and beyond. Some attention has been paid to short diphthongs attested in Icelandic by structuralists and phoneticians. Additionally, glide emergence, where a short vowel is expected, seems to take place in the present- day Sursilvan dialect of the Romansh language. What these languages have in common is that diphthongs occur in specific contexts, namely, they are allowed before consonants that are marked by what might be defined as secondary articulation. In this paper, in order to account for the occurrence of short diphthongs in these contexts, I adopt a structural model of phonological representations whereby glide emergence is the result of the interplay between a weak, empty-headed onset and the preceding nucleus.

Among the most important expressions of the cultural identity of the Silesians are the Silesian dialect and Silesian cuisine. The German-Polish cultural and linguistic contacts that have been present in Silesia for centuries are also manifested in the culinary vocabulary of the regionʼs inhabitants. In addition to numerous loan words of German provenance, which have also been incorporated into Polish literary language, many other lexemes are found in Silesian variety that are related to eating and drinking and have only regional distribution. From a contact linguistic perspective, the article focuses on the court terms of German provenance present in the Silesian dialect, mainly addressing the various forms of borrowing.

The article discusses the use of metaphors in the terminology of astronomy and astrophysics. The terminology of these fields is relatively stable, characterized by terminological diversity, thus allowing to draw sufficiently general conclusions. Three cases are to be considered: (a) first, the metaphor as a powerful source of terms, assuming the denominative function, (b) the terminological metaphor which leaves a certain domain and which penetrates into the general language, which is sometimes called determinologization, and, (c) finally, the terminological metaphor migrating from one specialized domain to other terminologies in which it is newly used to denote another concept, this phenomenon sometimes being referred to as transterminologization. The three processes are analysed and documented, using French and Czech examples, excerpted from specialised texts (encyclopaedic dictionary and newspaper articles).

The main goal of today’s car designers is to minimize fuel consumption in all possible ways at the same time maintaining the vehicle’s performance as usual. The goal of this work is to study the effect of adding a vortex generator (VG) on the aerodynamics of the vehicle and fuel economy. Both theoretical and experimental works were carried out and the outcomes of the numerical simulations are contrasted with those of the experimental results. A utility vehicle model with a scale ratio of 1:15 was used as a test model. Experimental research has been done on the fluctuation of the coefficient of pressure, dynamic pressure, and coefficients of lift and drag with and without VG on the roof of a utility vehicle. The delta-shaped VG was put to the test both numerically and experimentally. At a velocity of 2.42 m/s, it is observed that the addition of VG can raise the pressure coefficient by about 17%. When compared to the vehicle model without vortex generators, the velocity profile of the ccomputational fluid dynamics analysis shows that at the back end of the vehicle, the wake has been minimized with VG.

The paper presents the first off-grid system designed to supply electricity to the equipment mounted on components of the district heating network in district heating chambers. The proposed off-grid system is equipped, among other things, with a turbine and a generator intended for electricity production. On-grid power supply is a common way of providing electricity with strictly defined, known and verified operating parameters. For off-grid power supply, however, there are no documented testing results showing such parameters. This paper presents selected results of tests and measurements carried out during the operation of an off-grid supply system powering the equipment installed in a district heating chamber. The values of voltage obtained from a turbine-driven generator are analysed in detail. The analysis results can be used as the basis for further works aiming to optimize the off-grid system of electricity supply to devices installed in district heating chambers.

The design of suitable thermophysical properties of reinforced ice as well as employing the novel material in feasible ways represent key aspects towards alternative building sustainability. In this overview research studies dealing with reinforced ice structures have been presented with an emphasis on construction parameters and reinforcement materials of the structures. The main focus of the study is directed to the identification of the main issues related to the construction of reinforced ice structures as well as the environmental and economic impact of such structures. Obtained research data shows that the compressive, tensile, and bending strength of reinforced ice can be increased up to 6 times compared to plain ice. The application of reinforcement materials decreases creep rate, enhances ductility, and reduces brittle behaviour of ice. Assessed reinforced ice structures were mainly found to be environmentally friendly and economically viable. However, in most of the analysed studies construction parameters and physical properties were not defined precisely. The conducted overview indicates the necessity for more comprehensive and more accurate data regarding reinforced ice construction, applied methods, and processes, and preparation of ice composites in general.

Improvement in the exegetic efficiency of a solar air heater (SAH) can be done by enhancing the rate of heat transfer. In this work, the exergetic efficiency optimization of an artificially roughened solar air heater having an inverted L-shape rib has been performed. The numerical analysis of the exergetic performance of the solar air heater was carried out at a constant heat flux of 1000 W/m2. The study was conducted to investigate the effect of different relative roughness pitch (7.14–17.86) on the exergy losses, under the Reynolds number range of 3000 to 18 000. The roughness parameter of this geometry has been optimized and found to be among functional operating parameters like average solar intensity and temperature rise across the collector. The optimized value of relative roughness pitch is 17.86 at the isolation of 1000 W/m ², and the parameter of temperature rise ranges from 0.005 to 0.04.

Conventional fuels are the primary source of pollution. Switching towards clean energy becomes increasingly necessary for sustainable development. Electric vehicles are the most suitable alternative for the future of the automobile industry. The battery, being the power source, is the critical element of electric vehicles. However, its charging and discharging rates have always been a question. The discharge rate depends upon various factors such as vehicle load, temperature gradient, surface inclination, terrain, tyre pressure, and vehicle speed. In this work, a 20 Ah, 13S-8P configured lithium-ion battery, developed specifically for a supermileage custom vehicle, is used for experimentation. The abovementioned factors have been analyzed to check the vehicle’s overall performance in different operating conditions, and their effects have been investigated against the battery’s discharge rate. It has been observed that the discharge rate remains unaffected by the considered temperature difference. However, overheating the battery results in thermal runaway, damaging and reducing its life. Increasing the number of brakes to 15, the impact on the discharge rate is marginal; however, if the number of brakes increases beyond 21, a doubling trend in voltage drops was observed. Thus, a smoother drive at a slow-varying velocity is preferred. Experiments for different load conditions and varying terrains show a rise in discharge with increasing load, low discharge for concrete, and the largest discharge for rocky terrain.

The numerical simulation of the heat transfer in the flow channels of the minichannel heat exchanger was carried out. The applied model was validated on the experimental stand of an air heat pump. The influence of louver heights was investigated in the range from 0 mm (plain fin) to 7 mm (maximum height). The set of simulations was prepared in Ansys CFX. The research was carried out in a range of air inlet velocities from 1 to 5 m/s. The values of the Reynolds number achieved in the experimental tests ranged from 93 to 486. The dimensionless factors, the Colburn factor and friction factor, were calculated to evaluate heat transfer and pressure loss, respectively. The effectiveness of each louver height was evaluated using the parameter that relates to the heat transfer and the pressure drop in the airflow. The highest value of effectiveness (1.53) was achieved by the louver height of 7 mm for the Reynolds number of around 290.

In this work, we propose a new method for manufacturing busbars in photovoltaic modules for different solar cell generations, focusing on 1st and 3rd generations. The method is based on high-pressure spray coating using nanometric metallic powder. Our focus is primarily on optimizing conductive paths for applications involving conductive layers used in 3rd generation solar cells, such as quantum dot solar cell, dye-sensitized solar cell, and silicon-based solar cells on glass-glass architecture for buildingintegrated photovoltaic. The advantages of the proposed method include the possibility of reducing the material quantity in the conductive paths and creating various shapes on the surface, including bent substrates.
This paper examines the influence of the proposed high-pressure spraying technique using metallic particles on the morphology of the resulting conductive paths, interface characteristics, and electrical parameters. Conductive paths were created on four different layers commonly used in photovoltaic systems, including transparent conductive oxide, Cu, Ti, and atomic layer deposition processed Al ₂O ₃. The use of high-pressure technology enables the production of conductive layers with strong adhesion to the substrate and precise control of the spatial parameters of conductive paths. Furthermore, the temperature recorded during the deposition process does not exceed 385 K, making this technique suitable for various types of substrates, including glass and silicon. Additionally, the produced layers exhibit low resistance, measuring less than 0.3Ω . Finally, the mechanical resistance, as determined through tearing tests, as well as environmental and time stability, have been confirmed for the produced paths.