The paper presents the results of the electrodeposition of nickel composite coatings reinforced with the ceramic SiC particles. A Watts type galvanic bath modified with various organic additives was used. These additives were: 2-sulfobenzoic acid imide (LSA), dioctyl sulfosuccinate sodium salt (DSS), sodium dodecyl sulfate (SDS), tris (hydroxymethyl) aminomethane (THAM) and hexamethyldisilizane (HMDS). The nickel composite coating was electrodeposited on a 2xxx aluminum alloy series substrate (EN-AW 2017) with zinc interlayer. Studies concerned the effect of the applied organic additives on properties of composite coatings such as: microstructure, microhardness, adhesion to the substrate, corrosion resistance and roughness. The structure of the coatings was assessed by scanning electron microscopy and light microscopy. Based on the studies of zeta potential it was found that the bath modification had a significant impact on the amount of the ceramic phase embedded in metal matrix. The tests conducted in a model 0.01 M KCl solution were not fully representative of the true behavior of particles in a Watts bath.

This study illustrates the antifungal activity of green biosynthesis of a silver nanoparticle solution using one of Sinai’s natural plant extracts, namely Zygophyllum album which was used as a stabilizer and reducing agent to reduce Ag+ to metallic silver. In this study the plant extract was prepared by boiling in water for 10 min., 70% ethanol and wet autoclaving for 5 min. AgNPs were prepared using these three different extract methods. Transmission electron microscope (TEM) and zeta potential techniques were employed to characterize the synthesis of nanoparticles. The size of particles ranged from 6.28 nm to 28.89 nm at x100 and the zeta potential had one peak at –16.6 mean (mV) at area 100% for green synthesized AgNPs from Z. album prepared from boiling in water for 10 min. The size of particles ranged from 6.64 nm to 54.82nm at 100x and the zeta potential had one peak at – 12.9 mean (mV) at 100% area for green synthesized AgNPs from the plant ethanol extract. The size of particles ranged from 9.39 nm to 31.93 nm at 100x and the zeta potential had one peak – 19.8 mean (mV) at 100% area for green synthesized AgNPs from the wet autoclaved plant extract of Z. album for 5 min. All treatments of plant extract and AgNPs solutions, prepared from these plant extracts of Zygophyllum album, were compared with the positive control and Tachigaren – 30% W/P was conducted on the radial growth of F. oxysporium and caused antifungal activity with a high inhibition percent. There was a highly significant difference between the various extraction techniques. Increasing the concentration of treatments was accompanied with a significant effect on Fusarium wilt. Thus, this study may provide a good alternative approach to control Fusarium wilt disease in the field and under storage conditions of vegetables. Our study suggests that silver nanoparticles of plant extracts can be used for controlling Fusarium wilt.

The paper presents the results of the electrodeposition of nickel composite coatings reinforced with the nano size SiC ceramic particles. The type and size of the ceramic particles or organic additives used play a important role during electrodeposition processes. A Watts type galvanic bath with various organic additives was used. These additives were: 2-sulfobenzoic acid imide, dioctyl sulfosuccinate sodium salt (DSS), sodium dodecyl sulfate, tris (hydroxymethyl) aminomethane and hexamethyldisilizane. The nickel composite coating was electrodeposited on a 2xxx aluminum alloy series substrate (EN-AW 2017) with zinc interlayer. The work concerns the determination of the impact of the change in the zeta potential of SiC nanoceramic particles used on properties of composite coatings (wear resistance, corrosion, etc.). The paper characterized the composite nickel coatings on aluminum alloy using SEM techniques, wear resistance tests by TABER method and coating adhesion to the substrate using the “scratch test” method. The corrosion resistance of coatings was also tested using electrochemical methods. The research allowed to determine the effect of SiC nanoceramic particle size on the value of the zeta potential in the model KCl solution.