This article presents values of porosity and compression strength of hard coals from the area of the Upper Silesian Coal Basin. The change of the stage of carbonification, which results from conversion of coal substance in the process of coalification, is a source of many changes in the structure of coal. These changes exert influence on values of physical parameters, including the values of porosity and strength. Porosity and compression strength change with the degree of carbonification, a result of the depth of deposition. This study determined the values of effective porosity of coals and their strength considering the age chronology of coal seams and the depth of their occurrence. It examined coals of the Cracow Sandstone Series, the Mudstone Series, the Upper Silesian Sandstone Series, and the Paralic Series from depths ranging from about 350 m to 1200 m. The authors have shown that effective porosity of the Upper Silesian coals changes for particular stratigraphic groups and assumes values from a few to a dozen or so per cent, while compression strength from several to several dozen megapascals. It has been observed, from a chronostratigraphic perspective, that there is a shifting of the upper and lower limits of intervals of porosity variations towards higher values for younger coals. With the increase in compression strength, value of porosity in particular stratigraphic groups generally decreases. However, no regular changes were observed in mean, uniaxial compressive strength with the increase in the age of subsequent stratigraphic groups. On the other hand, for bright coal and semi-bright coal, a visible decrease in compression strength with the depth of deposition of strata was observed.

Knowledge of the way in which minor and trace elements occur in coal is one of the most important geochemical indicators of coal quality. The differences between the methods of binding elements in coal in each coal seam and the variability of this feature of coal in the basin profile have not been discussed so far. These coal features were identified in a group of selected coal seams (209, 401, 405, 407, 501, 504, 510, 615, 620) in the Upper Silesian Coal Basin (USCB). At the same time, the differences in the role of identified mineral and maceral groups in concentrating specific elements in coal is highlighted. Identical or similar tendencies of changes in the way in which As and V, Ba and Rb, Co and Pb, Co and Zn, Mn and Pb, Pb and Zn, Co and Rb, and for Cr and Cu occur in the coal seams in the USCB profile was found. Changes in the mode of occurrence of As and Pb in coal in the USCB profile were probably influenced by carbonate mineralization. The changes in the mode of occurrence of Mni and Pb in the coal were probably determined by dia and epigenetic sulfide mineralization, while the content of Ba, Cr, Rb, Sr, and V in coal from these deposits was affected by clay minerals. It was observed that the greater the degree of the carbonization of the organic matter of coal, the lower the content of As, Mn and Pb in coal and the higher the content of Ba and Sr in coal.

Dependences Between Certain Petrographic, Geochemical and Technological Indicators of Coal Quality in the Limnic Series of the Upper Silesian Coal Basin (Uscb), Poland

This article aims to assess the values of the most often measured petrographic, geochemical and technological indicators of coal quality and to identify probable dependences between them in the USCB coal. The following can also be observed: high content of Cd and Co in carbonate minerals separated from coal, in clay minerals – Cr and Zn, and in sulfide minerals – Cu, Ni and Pb. Nevertheless, it is organic matter which has the greatest influence on the average content of trace elements in coal. Correlations between the values of some of the indicators of coal quality were also observed. It has been observed that the increase in vitrinite content in coal is accompanied by a decrease in, while an increase in the content of liptinite and inertinite in coal is accompanied by an increase in the content of CaO, MgO, and SO3 in coal ash. An increase in the carbonization of organic matter is accompanied by an increase in the content of Cu and Ni in coal, and a decrease in the content of Pb and S in coal and the content of Fe2O3 in coal ash.

The Neogene basaltoid intrusions found in the S-7 borehole in the Sumina area (USCB) caused transformations of the adjacent Carboniferous rocks. The mineral and chemical compositions of the basaltoides are similar to those of the Lower Silesian basaltoides. The transformations that took place in the vicinity of the intrusion were manifested in the formation of natural coke, the secondary mineralization of these rocks (calcite, chlorite, zeolites and barite) and in the specific distribution of rare earths (REY). Among REY, the light elements (LREY) had the highest share, while the heavy elements (HREY) had the lowest share. Regardless of the lithological type of the analyzed rock, with increasing distance from the intrusion, the percentage of MREY and HREY elements increases at the expense of the light elements LREY. All analyzed distribution patterns of the REYs are characterized by the occurrence of anomalies, which often show a significant correlation with the distance of sampling points from the basaltoid intrusion. The specific distribution of REYs in the vicinity of the intrusion of igneous rocks is an indication of the impact of hydrothermal solutions associated with the presence of basaltoides on the rocks closest to them located at a temperature of over 200°C.