The Bulletin of the Polish Academy of Sciences: Technical Sciences (Bull.Pol. Ac.: Tech.) is published bimonthly by the Division IV Engineering Sciences of the Polish Academy of Sciences, since the beginning of the existence of the PAS in 1952. The journal is peer‐reviewed and is published both in printed and electronic form. It is established for the publication of original high quality papers from multidisciplinary Engineering sciences with the following topics preferred: Artificial and Computational Intelligence, Biomedical Engineering and Biotechnology, Civil Engineering, Control, Informatics and Robotics, Electronics, Telecommunication and Optoelectronics, Mechanical and Aeronautical Engineering, Thermodynamics, Material Science and Nanotechnology, Power Systems and Power Electronics.
Journal Metrics: JCR Impact Factor 2018: 1.361, 5 Year Impact Factor: 1.323, SCImago Journal Rank (SJR) 2017: 0.319, Source Normalized Impact per Paper (SNIP) 2017: 1.005, CiteScore 2017: 1.27, The Polish Ministry of Science and Higher Education 2017: 25 points.
Abbreviations/Acronym: Journal citation: Bull. Pol. Ac.: Tech., ISO: Bull. Pol. Acad. Sci.-Tech. Sci., JCR Abbrev: B POL ACAD SCI-TECH Acronym in the Editorial System: BPASTS.
O tym, dlaczego kochamy Polaroidy i czy lodówki będą wkrótce same kupowały mleko, rozmawiamy z prof. Andreasem Böhnem, stypendystą Polskiego Instytutu Studiów Zaawansowanych PIASt.
The Bulletin of the Polish Academy of Sciences: Technical Sciences (Bull.Pol. Ac.: Tech.) is published bimonthly by the Division IV Engineering Sciences of the Polish Academy of Sciences, since the beginning of the existence of the PAS in 1952. The journal is peer‐reviewed and is published both in printed and electronic form. It is established for the publication of original high quality papers from multidisciplinary Engineering sciences with the following topics preferred: Artificial and Computational Intelligence, Biomedical Engineering and Biotechnology, Civil Engineering, Control, Informatics and Robotics, Electronics, Telecommunication and Optoelectronics, Mechanical and Aeronautical Engineering, Thermodynamics, Material Science and Nanotechnology, Power Systems and Power Electronics.
Journal Metrics: JCR Impact Factor 2018: 1.361, 5 Year Impact Factor: 1.323, SCImago Journal Rank (SJR) 2017: 0.319, Source Normalized Impact per Paper (SNIP) 2017: 1.005, CiteScore 2017: 1.27, The Polish Ministry of Science and Higher Education 2017: 25 points.
Abbreviations/Acronym: Journal citation: Bull. Pol. Ac.: Tech., ISO: Bull. Pol. Acad. Sci.-Tech. Sci., JCR Abbrev: B POL ACAD SCI-TECH Acronym in the Editorial System: BPASTS.
Computational modeling plays an important role in the methodology of contemporary science. The epistemological role of modeling and simulations leads to questions about a possible use of this method in philosophy. Attempts to use some mathematical tools to formulate philosophical concepts trace back to Spinoza and Newton. Newtonian natural philosophy became an example of successful use of mathematical thinking to describe the fundamental level of nature. Newton’s approach has initiated a new scientific field of research in physics and at the same time his system has become a source of new philosophical considerations about physical reality. According to Michael Heller, some physical theories may be treated as the formalizations of philosophical conceptions. Computational modeling may be an extension of this idea; this is what I would like to present in the article. I also consider computational modeling in philosophy as a source of new philosophical metaphors; this idea has been proposed in David J. Bolter’s conception of defining technology. The consideration leads to the following conclusion: In the methodology of philosophy significant changes have been taking place; the new approach do not make traditional methods obsolete, it is rather a new analytical tools for philosophy and a source of inspiring metaphors.
This publication presents an assessment of the economic efficiency of a hypothetical installation for the gasification of the municipal and industrial waste for the production of syngas used subsequently for the production of energy or chemical products. The first part of the work presents an example of a technological system for the energo-chemical processing of coal mud and municipal waste, based on the gasification process using a fluidized bed reactor. A hypothetical installation consists of two main blocks: a fuel preparation unit and a gasification unit. In the fuel preparation installation, reception operations take place, storage, and then grinding, mixing, drying and transporting fuel to the gasification unit. In the gasification installation, fuel gasification, oxygen production, cooling and purification of raw process gas and ash treatment are carried out. The following key assumptions regarding the gasification process, as well as the capital expenditures and operating costs related to the process, were estimated. Consequently, based on the method of discounted cash flows, the unit cost of generating energy contained in the synthesis gas (cost of energy, COE) was determined and the results were interpreted. In order to obtain an acceptable efficiency of the gasification process for waste fuels for the production of alternative fuel (process gas), it is necessary to supplement the mixture of waste coal and coal mud with the RDF. In this case, the unit cost of fuel measured by the PLN/GJ index is lower than in the case of hard coal and comparable with brown coal. The use of coal mud for the production of process gas in an economically efficient way is possible only in the case of changes in the legal system allowing for charging fees for the utilization of industrial waste – coal mud.
In the authors’ opinion, the issue of incorrectly functioning water insulation of foundation walls in the existing buildings in Poland is currently rather common. The paper includes a multicriteria analysis aimed at arranging the selected options of the foundation wall vertical water insulation technology in an existing model historic building using the weighted sum, entropy and AHP methods. Each of the studied solutions was evaluated in terms of the following criteria: costs of construction works, time of execution of construction works, popularity of using particular insulation options by other contractors, durability of the executed insulation and the degree of nuisance of the executed works
This paper points out assumptions and reasons for using digital technologies, the importance of using digital technologies in teaching and management. It also refers to the digital technologies and digital competences as an essential part of the competency model of a teaching staff in education. It also points out the fact that existing competency models need to be further explored, decomposed, and formulated as an illustration by the digital competences extensions.
CCS (Carbon Capture and Storage) technology is one of the methods that limit the release of carbon dioxide into the atmosphere. However, the high cost of capturing CO2 in this technology is a major obstacle to the implementation of this solution by power plants. The reduction of costs is expected primarily on the side of the capture and separation of CO2 from flue/ industrial gas. The article presents the financial performance of the most popular amine technology (MEA) against mesoporous material about MCM-41 structure obtained from fly ash, impregnated with polyethyleneimine (PEI), for CCS installations. The study was conducted for an investment comprising three key components that provide a full value chain in CCS validation (capture, transport and storage). The mineralogical studies and determination of the physicochemical properties of mesoporous material produced from waste materials such as fly ash allowed us to identify the best class sorbents of MCM-41, which can be used in CO2 capture technologies. Developing an innovative relationship not only allows 100% of CO2 to be removed but also reduces operating costs (OPEX), primarily including energy by 40% and multiple material costs relative to amine mixtures such as MEA.
In the paper the topic of Building Information Technology BIM is investigated. It is new in Polish circumstances technology for construction and for building product industry, which contribute to change and develop level of industrialization. Especially challenge raising from the information and introducing IT technology into daily practice is considered to provide changes in construction branch of economy. In Poland there is the hot need of start to introduce BIM as the common technology for owners of assets, facility management, construction entities, design offices, administration officers and many other players relative to construction data and processes. BIM technology introduction, basing on foreign case studies, results in cost savings, control and time reduction of investment processes and some more advantages. The perspective of digital buildings, digital infrastructure, digital roads, digital railways and digital cities is outlined at the perspective of technology challenge, but simply transfiguration of many fields of personal everyday life, where digitalization is already present and with the question when it will be common in professional activity, particularly in civil engineering.
Article deals with the problem of technology selection for construction project. Three criteria were proposed: cost, time and technological complexity. To solve the problem, fuzzy preference relations were used. Authors present an algorithm supporting multi-criteria decision-making process. The algorithm creates fuzzy preference relations on the basis of the fuzzy comparison: “xᵢ is better than xj”.Then, with the use of criteria weights it creates general fuzzy preference relation, finds all non-dominated (admissible) alternatives and the best one among them. The algorithm consists of 7 steps. Authors show application of the proposed algorithm – example calculations.
In education, information and Communications Technologies mostly play the role of a medium of communication, as well as a means of imparting knowledge. ICT, however, is used less as a subject for student activity, i.e. a subject for students to learn, where they can operate the technology, as in robotics or mechantronics. Information technologies are also very rarely implemented in education as a way for students to build their identity and shape their attitudes towards their outside and inside worlds. In spite of this, in the history of educational technology there have been a number of researchers and educators who have promoted interesting ideas for implementing technologies as tools for human cognitive, affective, psychomotor and moral empowerment. Today such people are also present in education, however, they play unimportant roles on the periphery of formal education. This paper is a reminder of a number of ideas by theorists and researchers concerning the implementation of ICT, but mainly highlights the empowerment it gives students and its humanizing/humanitarian role.
en
pl
