Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 9
items per page: 25 50 75
Sort by:
Download PDF Download RIS Download Bibtex

Abstract

Supply Chain Management (SCM) is a very important part of the industrial world, especially in the manufacturing sector. The development of the business world affects the complexity of the supply chain due to the lack of logistics infrastructure, quality of materials and components, and much more. Supply chain disruption risk mapping needs to be done due to high uncertainty, which is overcome by implementing a decision support system. Based on the background of the problem, supply chain disruption mapping uses the help of the Six Sigma method, which consists of 5 stages: Define, Measure, Analyze, Improve, and Control (DMAIC). The measurement of disturbance also uses the Failure Mode and Effect Analysis (FMEA) approach to prioritize risk. Risks that have a high assessment and cause failure need to be prioritized for improvement. This study aims to map supply chain disruptions in the current manufacturing industry based on the barriers, resistances, and causes detected for making a decision support system prototype. By implementing a decision support system in the supply chain process, it is
Go to article

Authors and Affiliations

Johanes Fernandes Andry
1
Filscha Nurprihatin
2
Lydia Liliana
1

  1. Department of Information Systems, Universitas Bunda Mulia, Indonesia
  2. Department of Industrial Engineering, Sampoerna University, Indonesia
Download PDF Download RIS Download Bibtex

Abstract

This paper addresses supply chain transparency improvement in a triadic manufacturersupplier-

supplier relationship. It investigates the problem of improving transparency using

a set of interviews; then, a detailed problematization and a simulation model is formulated

based on the results. The interview results show that there are two key issues to be considered:

information systems issues related directly to transparency and capability issues related

to utilizing transparency. The simulation results support developing capabilities by illustrating

the effects of different options for coordinating material flow. The results of the study

also indicate that while solutions to improve transparency can be relatively straightforward

to implement, developing the capability to benefit from it can be more challenging, even in

a well-established close partnership. In addition, suppliers may be hesitant to collaborate

without active manufacturer involvement.

Go to article

Authors and Affiliations

Osmo Kauppila
Kaisu Valikangas
Jukka Majava
Download PDF Download RIS Download Bibtex

Abstract

Performance measurement system in supply chain management (SCM) has been receiving increasing

attention by business organizations as a way to evaluate efficiency in supply chain

activities. Assessing the performance of supply chain uncovers the gap between planning

and actual performance as to trace the potential problems thus ascertain necessary areas

for improvement. This research aims to investigate the application of performance measurement

system in SCM as well as exploring its relationship with organization’s performance

among Malaysian manufacturing firms. By utilizing the questionnaire method, respondents

involved were requested to indicate the extent to which they use a number of 24 selected

performance measures that are related to SCM. The results show that the majority of the

observed manufacturing firms utilize specific performance measurement tools in evaluating

the supply chain performance. The current performance measurement techniques, the Balanced

Score Card is adopted by around a quarter of the total responding firms followed

by Supply Chain Operations References Model – SCOR, which attracts total users of only

a fifth of the total respondents. In particular, performance measures under customer service

category recorded the highest number of usage followed by cost-based performance measures

and operations management. The results of this investigation also unveil few major points

that are important to be highlighted. Firstly, the obtained outcomes of this study bring to

light the significant relationships between the utilization of supply chain performance measures

under customer service, operations management and organizational performance. In

addition, this study discovered a significant correlation between the size of the organization

and the extent of use of supply chain performance measures and how these two variables

positively correlated. Lastly, the findings also suggested that the performance measures for

SCM has been playing a crucial role in enhancing the performance of the organizations and

is increasingly operated as the firms grow in size. Based on the brief highlighted points listed

above, it is not an exaggeration to say that this research contributes new information to the

body of knowledge in performance measurement system in SCM and its associations with

organizational performance.

Go to article

Authors and Affiliations

Kamilah Ahmad
Shafie Mohamed Zabri
Download PDF Download RIS Download Bibtex

Abstract

Nowadays, it is necessary to develop a conceptual framework for analysing the relationship between the implementation of Additive Manufacturing (AM) and Supply Chain Management (SCM). In this context, a gap in the research has been observed in the new approach to designing the importance of AM in SCM. The main contribution of this paper, therefore, is a new framework to formulate the role in adopting AM in SCM. The research methodology is based on detailed literature studies of AM in relation to the SCM process within a manufacturing company, as well on a case study, namely the COWAN GmbH manufacturing company who specialise in producing homewares for motorhome enthusiasts. As highlighted in the state-of-the-art analysis, no work, currently available, supports all the features presented.
Go to article

Authors and Affiliations

Justyna Patalas-Maliszewska
1 2
ORCID: ORCID
Katarzyna Kowalczewska
3
Matthias Rehm
2
ORCID: ORCID

  1. Institute of Mechanical Engineering, University of Zielona Góra, Poland
  2. Professorship Production Systems and Processes, Chemnitz University of Technology, Germany
  3. Germany, COWAN GmbH, Germany
Download PDF Download RIS Download Bibtex

Abstract

With continuous and rapid change in both technology and businesses due to climate change and governments regulations, Green Supply Chain Management (GSCM) is receiving increasing attentions during last two decades. GSCM refers to the abilities of businesses to enhance operations and sustain environment at the same time and efficiently. In this paper, a comprehensive review of GSCM development and applications is conducted. This review aims to explore the recent developments of GSCM and necessity of adoption GSCM applications in businesses to insure sustainable development. First, a descriptive analysis of 796 paper adopted from Scopus database was conducted to review research on GSCM. Next, a bibliometric analysis of 235 paper was conducted to determine the recent trends and areas of GSCM and related keywords by using VOSviewer software. Then, a content analysis was carried out of 53 review papers by adopting WordStat software to analyze the impact of GSCM on related subjects and trends of GSCM. Finally, a summary analysis of GSCM advantages and challenges was conducted based on fundamental GSCM’s objectives. Results reveal that researches on GSCM are in upward curve with limitations in implementing GSCM applications due to high cost, and lack of sufficient experiences. Results also reveal positive moderate correlation of GSCM with environment, performance, sustainability and management practices indicating the limited implementation of GSCM applications. To further explore these limitations, this study summarized the recent challenges and future potential directions of GSCM in both businesses and environments.
Go to article

Authors and Affiliations

Ali Mohsin Salim Ba Awain
Abdullah M. Al-Ansi
Mohammed Jaboob
Download PDF Download RIS Download Bibtex

Abstract

The article presents a new optimization tool supporting supply chain management in the multi-criteria aspect. This tool was implemented in the EPLOS system (European Logistics Services Portal system). The EPLOS system is an integrated IT system supporting the process of creating a supply and distribution network in supply chains. This system consists of many modules e.g. optimization module which are responsible for data processing, generating results. The main objective of the research was to develop a system to determine the parameters of the supply chain, which affect its efficiency in the process of managing the goods flow between individual links in the chain. These parameters were taken into account in the mathematical model as decision variables in order to determine them in the optimization process. The assessment of supply chain management effectiveness was carried out on the basis of the global function of the criterion consisting of partial functions of the criteria described in the mathematical model. The starting point for the study was the assumption that the effectiveness of chain management is determined by two important decision-making problems that are important for managers in the supply chain management process, i.e. the problem of assigning vehicles to tasks and the problem of locating logistics facilities in the supply chain. In order to solve the problem, an innovative approach to the genetic algorithm was proposed, which was adapted to the developed mathematical model. The correctness of the genetic algorithm has been confirmed in the process of its verification.

Go to article

Authors and Affiliations

Mariusz Izdebski
Ilona Jacyna-Gołda
Piotr Gołębiowski
Jaroslav Plandor
Download PDF Download RIS Download Bibtex

Abstract

The paper refers to planning deliveries of food products (especially those available in certain seasons) to the recipients: supermarket networks. The paper presents two approaches to solving problems of simultaneous selection of suppliers and transportation modes and construction of product flow schedules with these transportation modes. Linear mathematical models have been built for the presented solution approaches. The cost criterion has been taken into consideration in them. The following costs have been taken into account: purchase of products by individual recipients, transport services, storing of products supplied before the planned deadlines and penalties for delays in supply of products. Two solution approaches (used for transportation planning and selection of suppliers and selection of transportation modes) have been compared. The monolithic approach calls for simultaneous solutions for the problems of supplier selection and selection of transportation modes. In the alternative (hierarchical) solution approach, suppliers are selected first, and then transportation companies and their relevant transportation modes are selected. The results of computational experiments are used for comparison of the hierarchical and monolithic solution approaches.

Go to article

Authors and Affiliations

Marek Magiera
Download PDF Download RIS Download Bibtex

Abstract

Due to globalized business operations, companies in different economic sectors are part of complex supply chain networks. Their value-added processes comprise product and information flows, e.g. with a focus on manufacturing, service or trade. Until the final product is delivered to the end customer, it needs to pass many different processes in cooperating organizations. As a result, there a lot of business-to-business (B2B) interactions with crossenterprise transactions, often including cross-border communications and sometimes even cross-industry trades with technological and often cultural implications. Especially the interfaces of supply chain networks are prone to inefficiencies, misunderstandings and delays due to a lack of standardized B2B transactions, which leads to waste in form of rework, errors and mistakes. In addition, new customers are hard to find for the manufacturing or trading company, since potential customers are so far limited to a regional network. The advantages of extending the customer base still need to be explored by many organizations. This paper discusses the opportunities by streamlining the communication along supply chain networks in a general fashion and then describes the application in a B2B automotive retail business. A concept of a web-based trading platform, which provides a seamless service for all steps of a convenient and efficient used vehicle remarketing business, is developed. It includes all phases, like offering and price finding in a comprehensive online platform, which also covers further activities, such as logistic services, financial transactions, and a mandatory feedback loop. The suggested B2B vehicle-trading platform enables a quick turnover of each transaction, which is analyzed and optimized based on the application of cross-enterprise Value Stream Management.
Go to article

Authors and Affiliations

Peter Plapper
Christof Oberhausen
Meysam Minoufekr
Download PDF Download RIS Download Bibtex

Abstract

The Bulletin of the Polish Academy of Sciences: Technical Sciences (Bull.Pol. Ac.: Tech.) is published bimonthly by the Division IV Engineering Sciences of the Polish Academy of Sciences, since the beginning of the existence of the PAS in 1952. The journal is peer‐reviewed and is published both in printed and electronic form. It is established for the publication of original high quality papers from multidisciplinary Engineering sciences with the following topics preferred: Artificial and Computational Intelligence, Biomedical Engineering and Biotechnology, Civil Engineering, Control, Informatics and Robotics, Electronics, Telecommunication and Optoelectronics, Mechanical and Aeronautical Engineering, Thermodynamics, Material Science and Nanotechnology, Power Systems and Power Electronics.

Journal Metrics: JCR Impact Factor 2018: 1.361, 5 Year Impact Factor: 1.323, SCImago Journal Rank (SJR) 2017: 0.319, Source Normalized Impact per Paper (SNIP) 2017: 1.005, CiteScore 2017: 1.27, The Polish Ministry of Science and Higher Education 2017: 25 points.

Abbreviations/Acronym: Journal citation: Bull. Pol. Ac.: Tech., ISO: Bull. Pol. Acad. Sci.-Tech. Sci., JCR Abbrev: B POL ACAD SCI-TECH Acronym in the Editorial System: BPASTS.

Go to article

Authors and Affiliations

Xiyue Tang
Guiwu Wei

This page uses 'cookies'. Learn more