The article presents research results of the strength parameters of HPC achieved in various research conditions. The research was carried out on substantially different samples, both as to the size as the slenderness ratio. Moreover, the assessment of the effect of speed of a load on strength parameters as well as other factors which in a significant way show the difference in the strength values was made. For comparison, the results were also applied to the relations known in ordinary concrete.

Approximately 30 million tons of tailings are being stored each year at the KGHMs Zelazny Most Tailings Storage Facility (TSF). Covering an area of almost 1.6 thousand hectares, and being surrounded by dams of a total length of 14 km and height of over 70 m in some areas, makes it the largest reservoir of post-flotation tailings in Europe and the second-largest in the world. With approximately 2900 monitoring instruments and measuring points surrounding the facility, Zelazny Most is a subject of round-the-clock monitoring, which for safety and economic reasons is crucial not only for the immediate surroundings of the facility but for the entire region. The monitoring network can be divided into four main groups: (a) geotechnical, consisting mostly of inclinometers and VW pore pressure transducers, (b) hydrological with piezometers and water level gauges, (c) geodetic survey with laser and GPS measurements, as well as surface and in-depth benchmarks, (d) seismic network, consisting primarily of accelerometer stations. Separately a variety of different chemical analyses are conducted, in parallel with spigotting processes and relief wells monitorin. This leads to a large amount of data that is difficult to analyze with conventional methods. In this article, we discuss a machine learning-driven approach which should improve the quality of the monitoring and maintenance of such facilities. Overview of the main algorithms developed to determine the stability parameters or classification of tailings are presented. The concepts described in this article will be further developed in the IlluMINEation project (H2020).