Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 312
items per page: 25 50 75
Sort by:
Download PDF Download RIS Download Bibtex

Abstract

The impacts of industrial wastewater contamination on the geotechnical properties of clayey soil have been studied in the research presented in this paper. The contaminant in question is industrial wastewater released from Thi-Qar oil refinery as a by-product of production, and the soil samples obtained from Thi-Qar oil refinery plant in Al-Nassyriah (a city located in the south of Iraq). The geotechnical properties of contaminated soil samples were compared with those of intact soil to measure the effects of such a contaminant. The soil samples were obtained from three locations in the study area; representing the highly contaminated area, the slightly contaminated area, and the intact area used as a reference for comparison of test results. The results of the tests showed that the contaminant causes an increase of natural moisture content, field unit weight, Atterberg’s limits, and maximum dry unit weight, as well as an increase of the compression index and the coefficient of vertical consolidation. Also, the contaminant causes a decrease in specific gravity, the optimum moisture content initial void ratio, the swelling index, the coefficient of permeability, and cohesion between soil particles.

Go to article

Authors and Affiliations

M.O. Karkush
T.A.A. Al-Taher
Download PDF Download RIS Download Bibtex

Abstract

This paper presents the analysis of the influence of works related to the dynamic replacement column formation on the bridge pillar and the highway embankment located nearby. Thanks to DR columns, it is possible to strengthen the soil under road embankment in a very efficient way. However, the construction of such support carries risk to buildings and engineering structures located in the neighbourhood. Therefore modelling and monitoring of the influence of the conducted works should be an indispensable element of each investment in which dynamic replacement method is applied. The presented issue is illustrated by the example of soil strengthening with DR columns constructed under road embankment of DTŚ highway located in Gliwice. During the inspection, the influence of vibrations on the nearby bridge pillar and road embankment was examined. The acceleration values obtained during these tests were used to verify the elaborated numerical model.

Go to article

Authors and Affiliations

M. Łupieżowiec
P. Kanty
Download PDF Download RIS Download Bibtex

Abstract

This paper presents an evaluation of the Hypoplastic Clay constitutive model for finite element analysis of deep excavations and displacements induced by excavations in the influence zone. A detailed description and formulation of the Hypoplastic Clay soil model is included. A parametric case study of a deep excavation executed in Pliocene clays is presented. FE analysis was performed using several soil models (Mohr-Coulomb, Modified Mohr-Coulomb, Drucker-Prager, Modified Cam-Clay, Hypoplastic Clay) and the results were compared to in-situ displacements measurements taken during construction. Final conclusions concerning the suitability of the Hypoplastic Clay model for deep excavation modelling in terms of accurate determination of horizontal displacements of the excavation wall, the uplift of the bottom of excavation, and, most importantly,vertical displacements of the terrain in the vicinity of the excavation are presented.

Go to article

Authors and Affiliations

M. Mitew-Czajewska
Download PDF Download RIS Download Bibtex

Abstract

Although the utilization of pesticides accounted for the group of persistent organic pollutants was banned years ago, a count of pesticides are still directly or indirectly a source of contamination in Europe. One of them, simazine is still allowed for use in the United States. Aim of this experiment was development of soil remediation method which could be utilized for degradation triazine class pesticides – simazine was an example used. A method for soil remediation based on ozonation processes in fluidized bed was successfully utilized for removal of simazine from contaminated soil. For the study soil highly contaminated with simazine up to the concentration of 0.05% w/w was used. Determination of the pesticide levels in soil was performed using extraction and gas chromatography. The method allowed 80% reduction of pesticide concentration level. The degradation of pesticide was accompanied with changes of physicochemical parameters of soil, i.e., decrease of pH and a increase of nitrates concentration. Despite changes in physicochemical properties of the soil, the developed method proved to be highly effective and can be successfully applied on an industrial scale.

Go to article

Authors and Affiliations

Maciej Balawejder
Radosław Józefczyk
Piotr Antos
Marcin Pieniążek
Download PDF Download RIS Download Bibtex

Abstract

Aluminium is one of the main soil components. Usually it is a part of non-toxic aluminosilicates but in low pH values its mobility is higher and - especially in monomeric form is toxic for plants. Selenium is an essential element necessary for animals and humans. Its compounds have anticancer and anti mutagenic character. However, its high uptake from environment, e.g. with food or water could lead to various diseases including embryonic deformity, decreased hatchling survival and death to aquatic organisms. Soil contamination with aluminium leads to disturbances in plant growth as a result of low calcium and magnesium uptake. High concentrations of selenium lead to its accumulation in plant tissues what is the beginning of selenium fate in food chain. In this work a cultivated layer of soils located near five industry plants in the town of Opole (southern Poland) were investigated. Aluminium and selenium content in soils is an effect of two factors: its natural occurrence in rocks (natural content) and human activity - especially chemicals from agriculture, industrial and transport pollutants. Aluminium was determined in the range of 3440 to 14804 mg/kg d.w. Obtained results of selenium concentration covered the range from 27.1 to 958.1 μg/kg d.w. These results are slightly higher than concentrations noted in natural or non-polluted soils, but still low. These amounts of selenium could have more positive than negative effects. Aluminium and selenium concentrations were discussed concurrently with base soils parameters, such as pH, EC and granulometric fractions composition.

Go to article

Authors and Affiliations

Tomasz Ciesielczuk
Magdalena Senze
Grzegorz Kusza
Monika Kowalska-Góralska
Download PDF Download RIS Download Bibtex

Abstract

Green-geo-engineering with geosynthetic reinforced soil structures is of increasing practice around the world. Poland is among the leading countries with the third biggest geogrid market in Europe. The German EBGEO 2010 Guideline for Soil Reinforcement with Geosynthetics as first European Guideline for Geosynthetics linked to the Eurocode 7, and the new design code for Japanese railway structures under seismic loading are introduced. New research results from the Geotechnical Institute of the RWTH Aachen, Germany, dealing with the soil/reinforcement interaction and new approaches for design codes for the reinforcement of base courses in traffic areas based on lab and field tests in the USA are presented.

Go to article

Authors and Affiliations

G. Heerten
Download PDF Download RIS Download Bibtex

Abstract

The problem of consolidation of soil has been widely investigated. The basic approach was given by Terzaghi who assumed soil of constant physical and mechanical parameters. In the case of peat consolidation, the permeability coefficient of soil and the elasticity modulus are functions of the settlement which is an important additional factor. The model proposed here assumes varying the elasticity and permeability coefficients. Moreover, the settlement is described by the so-called elementary curve which was approximated empirically based upon laboratory tests. The model allows to consider the case when the filtration in the peat body goes in horizontal direction. It happens so when the charging layer does not receive outgoing water from the pores. The model includes also the case when the load involving consolidation varies in time i.e. the charging layer grows up gradually. The model has been applied practically in several cases and it comes that there is a good agreement between calculated and measured settlement of the consolidated peat layer.

Go to article

Authors and Affiliations

Z. Meyer
R. Coufal
M. Kowalów
T. Szczygielski
Download PDF Download RIS Download Bibtex

Abstract

The drainage consolidation method has been efficiently used to deal with soft ground improvement. Nowadays, it has been suggested to use a new sand soil which is a composite of sand and recycled glass waste. The permeability performance of glass-sand soil was explored to judge the feasibility of glass-sand soil backfilled in the drainage consolidation of sand-drained ground. For comparison purposes, different mix proportions of recycled glass waste, fineness modulus, and glass particle size were analyzed to certify the impact on the permeability coefficient and the degree of consolidation. The numerical results show that adding a proper amount of recycled glass waste could promote the permeability performance of glass-sand soil, and the glasssand soil drain could be consolidated more quickly than a sand drain. Experiments showed that glass-sand soil with the a 20% mix of recycled glass waste reveals the optimum performance of permeability.

Go to article

Authors and Affiliations

F.C. Wang
X.N. Feng
H. Gong
H.Y. Zhao
Download PDF Download RIS Download Bibtex

Abstract

Contamination of soil with heavy metals has become a worldwide environmental problem, and receives great attention. In this study, we aim to investigate soil pollution level affected by an industrial district nearby. The total amount of typical heavy metals in the soils (Hengyang Songmu Industrial Park, Hunan Province, China) was analyzed. In addition, the fraction analysis and laboratory simulation leaching via different pH rainwater was carried out to study the migration and transformation of heavy metals. The main results show that the contents of Cu, Zn, Pb, Cr and Cd in the samples were higher than the soil background values in Hunan Province. The heavy metals forms, analyzed by sequential extraction method, show that the proportion of the unstable form of Cd, Zn and Pb was more than 50%. Igeo values indicate that the heavy metal pollution degree of soil sample #5 at the investigated area is recorded in the order of Cd(6.42), Zn(2.28), Cu(1.82), Pb(1.63), and Cr(0.37). Cu, Zn, Pb, Cr and Cd in this area could pose a potential leaching risk to the environment which may affect the food chain and constitute a threat to human health. It would be necessary to take steps to stabilize and monitor the heavy metals in soil.

Go to article

Authors and Affiliations

Wenfa Tan
Yuan Li
Lei Ding
Yachao Wang
Jiangxiang Li
Qinwen Deng
Feng Guo
Xue Xiao
Download PDF Download RIS Download Bibtex

Abstract

To improve bioremediation of arsenic (As) contamination in soil, the use of microorganisms to efficiently reduce As and their assessment of genetic erosion by DNA damage using genomic template stability (GTS) evaluation and using RAPD markers were investigated. The five sites examined for microorganisms and contaminated soils were collected from affected gold mining areas. The highest As concentration in gold mining soil is 0.72 mg/kg. Microorganism strains isolated from the gold mining soil samples were tested for As removal capacity. Two bacterial isolates were identified by 16S rRNA gene sequence analysis and morphological characteristics as Brevibacillus reuszeri and Rhodococcus sp. The ability to treat As in nutrient agar (NA) at 1,600 mg/L and contaminated soil samples at 0.72 mg/kg was measured at 168 h, revealing more efficient As removal by B. reuszeri than Rhodococcus sp. (96.67% and 94.17%, respectively). Both species have the capacity to remove As, but B. reuszeri shows improved growth compared to the Rhodococcus sp. B. reuszeri might be suitable for adaptation and use in As treatment. The results are in agreement with their genetic erosion values, with B. reuszeri showing very little genetic erosion (12.46%) of culture in As concentrations as high as 1,600 mg/L, whereas 82.54% genetic erosion occurred in the Rhodococcus sp., suggesting that Rhodococcus sp. would not survive at this level of genetic erosion. Therefore, B. reuszeri has a high efficiency and can be used for soil As treatment, as it is capable to tolerate a concentration of 0.72 mg/kg and as high as 1,600 mg/L in NA.

Go to article

Authors and Affiliations

Lamyai Neeratanaphan
Tawatchai Tanee
Alongklod Tanomtong
Bundit Tengjaroenkul
Download PDF Download RIS Download Bibtex

Abstract

This review covers aspects of soil science and soil biology of Antarctica with special focus on King George Island, South Shetlands, the martitime Antarctic. New approaches in soil descriptions and soil taxonomy show a great variety of soil types, related to different parent material, mainly volcanic origin, as well as on influences by soil biological processes. The spread of higher rooting plants attract microorga nisms, nematodes and collemboles which in turn build new organic material and change the environment for further successors. Microbial communities are drivers with respect to metabolic and physiological properties indicating a great potential in a changing environment. The literature review also shows a lack of investigations on processes of carbon and nitrogen turnover, despite wide knowledge on its standing stock in different environments. Further , only few reports were found on the processes of humification. Only few data are available which can be regarded as long term monitorings, hence, such projects need to be established in order to follow ecological changes.
Go to article

Authors and Affiliations

Manfred Bölter
Download PDF Download RIS Download Bibtex

Abstract

The presented studies were focused on evaluating the utility of one of sequential extraction methods for evaluating the bioavailability of mercury in soils polluted by this element. Soil samples collected from horizons 0-20 cm and 20-80 cm were subject to analysis of the basic physical and chemical properties of soils. Moreover, the total content of mercury was determined and sequential extraction of mercury was conducted using a modified five-stage Wallschläger method. The analyses show that the studied soils are characterized by a variable mercury content, the highest in the surface soil horizons. Sequential extraction of mercury in the analyzed soils has indicated that the highest percentage content in the total content had mercury linked with sulphides. A high content of mercury linked with organic matter was also noted. The content of bioavailable mercury did not exceed 1.5% of the total content.

Go to article

Authors and Affiliations

Anna Flader
Barbara Gworek
Jolanta Kostrzewa-Szulc
Download PDF Download RIS Download Bibtex

Abstract

The investigation was carried out on forest soils collected from areas subject to variable pollution. The fraction of strontium was analyzed in soil samples from north-eastern Poland (Borki forest division), treated as a non-polluted region (natural background) and in soil samples from central (Rogów forest division) and south-western Poland (Świerklaniec forest division). The sequential extraction procedure was applied in this study to separate the fractions of strontium. Five fractions were analyzed in every genetic horizon according to the Tessier method. The concentration of strontium was also analyzed in the plants. Both results were compared in order to evaluate the mobility and bioavailability of the trace elements in the environment. The content, distribution and bioavailability of the strontium fractions were investigated with particular emphasis on the contaminated study sites. Total content of strontium in surface horizons depended on the localization. Among analysed fractions strontium, in organic soil horizons, regardless of localization, occurred predominantly in mobile fractions in all examined soils.

Go to article

Authors and Affiliations

Agnieszka Jeske
Barbara Gworek
Download PDF Download RIS Download Bibtex

Abstract

The aim of these studies was to determine solubility and availability of the heavy metals in soil using single extraction procedure. The acid extractants: 1 M HCI, 10% HNO, and 0.43 M CH,COOH were tested as eluents. Extracting capacity of inorganic acids were higher than 65% of total Pb and Zn and hardly depended on their total content. Acetic acid leached less than 5% of total Cu, Ni and Pb. A statistical analysis showed that physico-chemical soil parameters affected heavy metals solubility in acids eluents. Single extraction in acid solution is a simple way to determine the soil contamination with heavy metals.
Go to article

Authors and Affiliations

Agnieszka Moćko
Witold Wacławek
Download PDF Download RIS Download Bibtex

Abstract

The method of solid-phase extraction on TENAX TA beads was applied in order to assess the content of potentially bioavailable PAH fractions in soils highly contaminated with these compounds. The extraction was carried out at 20°C and 60°C to enable separation of two fractions: ,,easily bioavailable" and ,.hardly bioavailable", correspondingly. The data obtained indicated a relatively low content of potentially bioavailable PAHs in soils with 4 and 5+6-ringed compounds as dominant groups.
Go to article

Authors and Affiliations

Bożena Smreczak
Barbara Maliszewska-Kordybach
Download PDF Download RIS Download Bibtex

Abstract

The aim of this study was to determine the effect of the soil tillage system on soil enzymatic activity. The performed investigations, employing two soil tillage systems: classical (ploughing) and simplified (no-tillage), were carried out on Luvisols and Arenosols differing typologically, with regard to their kind and species. The activity of the following five enzymes was determined in soil samples: dehydrogenases, acid phosphatase, alkaline phosphatase, urease and protease. The applied enzymes tests turned out to be good indicators differentiating the examined soil objects depending on the employed tillage system. The employment of the simplified tillage system stimulated significantly the activity of the analysed enzymes irrespective of the soil type. This effect was particularly apparent in the top layer (0-10 cm) of the soil. An exceptionally wide range of activity was obtained for dehydrogenases indicating the usefulness of this group of enzymes for the evaluation of changes in the soil environment under the influence of the soil tillage system. The observed activity stimulation of the examined enzymes was accompanied by advantageous changes in soil chemical conditions.

Go to article

Authors and Affiliations

E. Bielińska
A. Mocek-Płóciniak
Download PDF Download RIS Download Bibtex

Abstract

Over the two-year study (2008–2009) we monitored the influence of integrated and conventional

production systems on microbiological activity in soil and strawberry yield. The experiment also involved

fertilizers applied in three variants of treatment. The studied parameters were monitored over 2008 and 2009 by

determining the total number of soil microorganisms, the number of ammonifying bacteria and the strawberry

yield. The results of the study suggest the pronounced inhibitory effect of insecticides on number of studied

microorganism groups in all three conventionally treated variants, over the both years of study, which further

infers negligible stimulative influence of strawberry plants on yield.

Go to article

Authors and Affiliations

M. Pešaković
S. Milenković
D. Dragutin
L. Mandić
I.S. Glišić
J. Luković
Download PDF Download RIS Download Bibtex

Abstract

We assessed culturable soil microfungal diversity in various habitats around Hornsund, Spitsbergen in the High Arctic, using potato dextrose agar ( PDA) medium. Thermal growth classification of the fungi obtained was determined by incubating them in 4 ° Cand 25 ° C, permitting separation of those with psychrophilic, psychrotolerant and mesophilic characteristics. In total, 68 fungal isolates were obtained from 12 soil samples, and grouped into 38 mycelial morphotypes. Intergenic spacer regions of these morphotypes were sequenced, and they represented 25 distinct taxonomic units, of which 21 showed sufficient similarity with available sequence data in NCBI to be identified to species level. Soil under ornithogenic influence showed the highest species diversity, including sequences assigned to Mortierella macrocystis, M. elongata, Mortierella sp., Cudoniella sp., Varicosporium elodeae , Beauveria bassiana , Geomyces pannorum , Penicillium sp. and Atradidymella muscivora . Fourteen taxa were classified as psychrophilic, seven mesophilic, and four psychrotolerant.
Go to article

Authors and Affiliations

Hafizah Siti Hafizah
Peter Convey
Alias Siti Aisyah
Siang Hii Yii
Jerzy Smykla
Pang Ka−lai
Guo Sheng−yu
Download PDF Download RIS Download Bibtex

Abstract

The research system of soils for evaluation of the ecological state of farm-land soils in Poland is presented in this paper. Granulometrie composition, pH, organic matter content and the content of heavy metals (Cd, Cu, Ni, Pb, Zn) in soils were determined. On the basis of existing criteria (tab. 1) the state of soil pollution with heavy metals for separate provinces and whole country was estimated. The average heavy metal contents (mg/kg) in surface layer of soils in Poland are as follows: Cd-0.21, Cu-6.5, Ni-6.2, Pb-13.6, and Zn-32.4. The farm-land soils of Poland generally contain natural and slightly elevated level of the investigated heavy metals. This allows to produce high quality of agricultural materials appropriate for consumption and feeding of animals.
Go to article

Authors and Affiliations

Henryk Terelak
Arkadiusz Tujaka
Teresa Motowicka-Terelak
Download PDF Download RIS Download Bibtex

Abstract

The aim of this study was to assess soil contamination with toxic metals in the area of Piekary Śląskie (Silesian Voivodeship), taking into consideration various land use patterns. The scope of research covered the determination of lead and cadmium concentration in soil in the following areas: allotment gardens, fallow lands and kindergarten playgrounds. The lead and cadmium concentrations in soil samples were determined using a flame atomic absorption spectrometry technique, after the aqua regia extraction in a MDS 2000 microwave digestion system. The metal contents in the analyzed soil samples varied remarkably, depending on the sampling location and its distance from the main emitter of toxic metals in Piekary Śląskie, i.e. "Orzel Bialy" Non-Ferrous Metal Smelter. Metal concentrations determined in all soil samples significantly exceeded the concentration levels accepted in Poland for arable lands and residential areas. The lead and cadmium concentrations in soil should become the basis for stopping edible plants cultivation in the area of Piekary Śląskie. The contaminated soil in kindergarten playgrounds can be an important source of lead and cadmium contamination, posing hazard to the children's health. Contamination of playgrounds with toxic metals should stimulate undertaking actions aimed at modernization of playgrounds and reduction of the children's contact with soil. In the context of the applied result assessment criteria the soil concentrations of these metals observed in the region of Piekary Śląskie should arouse great concern among its users and local authorities.
Go to article

Authors and Affiliations

Elżbieta Kulka
Jadwiga Gzyl
Download PDF Download RIS Download Bibtex

Abstract

Estimation and application of water retention curves in heavy soils have own specifics. The reason for these specific properties is the composition of the high clay texture. This is manifested by volume changes of soil depending on moisture. Up to 40% change in the volume compared to the saturated state was recorded in the conditions of the East Slovakian Lowland. The results described in this work are based on research work carried out in the East Slovakian Lowland and represent an analysis of selected 42 samples out of a total of 250 samples in which laboratory measurements of soil water retention curves and volume changes were performed. Selected samples represent the localities Senné and Poľany. Volumetric changes were measured in a laboratory by measuring the dimensions of soil samples. Appropriate changes in the volume of soil samples should be measured when determining moisture retention curves. Neglecting this physical effect leads to a distorted determination of the water retention curves in heavy soils. In the laboratory measurement of water retention curves points, changes in the volume of the sample were measured in the range of 0.24–43.67% depending on the soil moisture potential during drainage. In the case of neglecting the effect of shrinkage during the drainage of samples, a certain error is occurring in the calculation of the volumetric moisture. The range of this error was 1–13% of volumetric moisture.

Go to article

Authors and Affiliations

Branislav Kandra
Milan Gomboš
Download PDF Download RIS Download Bibtex

Abstract

Soil Erodibility Factor (K-factor) is a crucial component of a widely used equation for soil erosion assessment known as the USLE (Universal Soil Loss Equation) or its revised version – RUSLE. It reflects the potential of the soil of being detached due to rainfalls or runoffs. So far, an extensive number of researches provide different approaches and techniques in the evaluation of K-factor. This study applies soil erodibility estimation in the soils of the South Caucasian region using soil data prepared by the International Soil Reference and Information Centre (ISRIC) with 250 m resolution, whereas the recent K-factor estimation implemented in the EU scale was with 500 m resolution. Soil erodibility was assessed using an equation involving soil pH levels. The study utilises Trapesoidal equation of soil data processing and preparation, as suggested by ISRIC, for various layers of surface soil data with up to 0-30 cm depth. Both usage of SoilGrids data and its processing as well as estimation of K-factor applying soil pH levels have demonstrated sufficient capacity and accuracy in soil erodibility assessment. The final output result has revealed the K-factor values varying from 0.037 and more than 0.060 t ha h/MJ mm within the study area.
Go to article

Authors and Affiliations

Nurlan Mammadli
1
ORCID: ORCID
Magsad Gojamanov
2

  1. Azerbaijan National Academy Sciences, Baku, Azerbaijan
  2. Baku State University, Baku, Azerbaijan

This page uses 'cookies'. Learn more