The Włodawka River catchment of an area of 725 km2 covers the central and eastern part of the Łęczna-Włodawa Lake District. Evaluation of the role of hydrogenic areas in runoff creation was based on materials of the Department of Hydrography and the Institute of Meteorology and Water Management data. The analysis was conducted for selected catchments in which additional hydrometric measurements and water quality tests were done. Such parameters as: the share of hydrogenic surfaces in total catchment area, types of wetlands, their hypsometric location and position with reference to drainage streams were taken into consideration for evaluation. The degree of anthropogenic transformation of the marshland was expressed in terms of density and depth of the drainage ditches that dissect it. It was found that the drained gyttja of Krowie Bagno plays a considerable role in increasing the minimum discharge. Wetlands in the Włodawka River catchment influence the conditions of the runoff and water quality, which is noticeable, primarily, in the concentration of organic carbon, and of nitrogen and phosphorus compounds.

Measurements of water temperatures, salinity, oxygen, suspended matter, nutrients and some metals contents were determined in the waters of the Hornsund Fjord. The investigations were carried out at the end of June and July and in mid-September 1979.

Wonji Shoa Sugar Estate (WSSE), located in the flood plain of the Awash River (Ethiopia), has been under long-term (>60 years) irrigation, industrial activities and agro-chemical usage. In this study, the hydrochemical properties of ground-water bodies available at WSSE have been characterized for quality compositions. Water samples were collected from groundwater monitoring piezometers distributed in the sugarcane plantation and then analysed for physico-chemical quality parameters (pH, EC,major cations and anions) following standard procedures. Other chemical indices (e.g., total dissolved solids (TDS),total hardness(TH),magnesium absorption ratio(MAR), base exchange (r1), meteoric genesis(r2)) were de-rived from the measured water quality parameters. The compositional variability and groundwater classification has been presented using the Box and Piper plots. The potential sources of minerals were suggested for each of the considered water sources based on their quality characteristics. Both trilinear Piper plot and meteoric genesis index revealed that groundwaterof the area is shallow meteoric water percolation type with a changing of hydrochemical facies and mixing trend. Ground-water of the area, is group 1 (Ca-Mg-HCO3) type, with no dominant cations and HCO3 are the dominant anions. Overall, the study result elucidates that the chemical composition of GW of the area showed spatial variability depending upon the variations in hydrochemical inputs from natural processes and/or anthropogenic activities within the region. The local an-thropogenic processes could be discharges from sugar factory, domestic sewage and agricultural activities.

The article presents research results of physico-chemical and environmental issues for the dust generated during dedusting of the

installation for the processing and preparation of moulding sand with bentonite. Particular attention was paid to the content of heavy

metals and emission of gases from the BTEX group, which is one of the determinants of the moulding sands harmfulness for the

environment. The analysis of heavy metals in the test samples indicate that there is an increase of the content of all metals in the dust

compared to the initial mixture of bentonite. The most significant (almost double) increase observed for zinc is probably related to the

adsorption of this element on the dust surface by contact with the liquid metal. The study showed, that dust contained more than 20% of

the amount of montmorillonite and had a loss on ignition at a similar level. The addition of 1% of dust to the used moulding sand results in

almost 30% increase in the total volume of gases generated in casting processes and nearly 30% increase of the benzene emission.

The present study aims at evaluating the quality of shallow groundwater (SGW) and its suitability for irrigation purpose in the most urbanised part of Johannesburg city, South Africa. The SGW samples were collected in three consecutive years and analysed for 20 selected physicochemical parameters, and heavy metals. The results were compared with the South African water quality, and Food and Agricultural Organization irrigation water quality guidelines, and standard indices derived from laboratory outputs. The results of the study show that all physiochemical parameters and heavy metals were within the limits set by both guidelines for irrigation purposes, except for potassium (3.58 mg∙dm ^–3) and manganese levels (3.152 mg∙dm ^–3). The calculated irrigation parameter values of sodium adsorption ratio ( SAR), sodium percentage (Na%), residual sodium carbonate ( RSC), magnesium hazard ( MH), Kelly’s ratio ( KR) and permeability index ( PI) were within the permissible range of irrigation water quality standards. The findings of this study provide helpful information for decision-makers such as utilisation of the studied groundwater for irrigation uses.

The aim of the study was evaluation of ecological potential of reservoirs, once complexes of fish ponds, which are currently covered by international form of nature conservation. An effort to identify the source of reservoirs’ water supply in biogenic substances has also been undertaken. Studied dam reservoirs, included in Natura 2000 site: a Special Protection Area (SPA) called ‘Uroczysko Mosty--Zahajki’ (PLH060014). The ‘Uroczysko Mosty-Zahajki’ consists of two neighboring, not very deep reservoirs: Mosty (390 ha) and Zahajki (240 ha), located in the Hanna river’s catchment area, a tributary of the Bug and Zielawa rivers entering the Krzna river. Studied reservoirs represented moderate (reservoir Zahajki) and bad (Mosty reservoir) ecological potential. The buffer zones of Mosty and Zahajki reser-voirs were dominated by large forest complexes. The studied reservoirs are supplied with rivers and ditches contaminated with nutrients. Mosty and Zahajki reservoirs, in spite of moderate and poor ecologi-cal potential, increase the water resources of the area, have a positive impact on the circulation of water and increase the landscape and recreational values of region.

Studies on biocompatibility of AISI 316LVM steel indicate the need to eliminate the nickel from the surface and replace it with other elements of improved biocompatibility. Therefore, in the presented work selected physicochemical and mechanical properties of the diffusive nitrocarburized layer formed by plasma potential by means of an active screen made of the Fe-Cr-Ni were studied. In the paper we present results of microstructure and phase composition of the layers, roughness, and surface wettability, potentiodynamic pitting corrosion resistance, penetration of ions into the solution as well as mechanical properties. The studies were conducted for the samples of both mechanically polished and nitrocarburized surfaces, after sterilization, and exposure to the Ringer’s solution. Deposition of the nitrocarburized layer increased the contact angle, surface roughness, surface hardness, and corrosion resistance with respect to the polished surfaces. The nitrocarburized layer is a barrier against the ions release into the solution and sterilization and exposure to Ringer solution. The obtained results showed beneficial increase of both mechanical and electrochemical properties of the deposited layer, and thus the applicability of the proposed method of surface treatment of the 316LVM steel for short-term implants after sterylization.

This work aims to evaluate the treated wastewater from the activated sludge treatment plant in the City of Sidi Bel Ab-bes (North-Western Algeria) which is required for reuse in irrigation. The control of irrigated areas downstream is done based on a pedological study. Physico-chemical analysis such as (pH, BOD5, COD and SS) indicate results in Algerian and international standards required by the WHO. The Sodium Adsorption Ratio and Electrical Conductivity values of the treated wastewater belong to the C3-S1 class. The treated wastewater has a fairly good microbiological quality that meets Algerian standards. The helminth eggs are practically absent. The concentrations of heavy metals are much lower than the limits prescribed in the Algerian decrees. Therefore, the overall processing plant efficiency is satisfactory and has the char-acteristics of a good treated water quality for reuse in the field of irrigation while protecting the environment. The pedolo-gical study of the soil samples shows that the most dominant fraction is undeveloped calcimagnetic. The planned irrigation plain covers an area of about two thousand hectares. Depending on the crops to irrigate; the development and nature of the necessary or recommended improvements, the proposed irrigation perimeter could be classified into five categories in which only three categories are irrigable. Water projects have been proposed to ensure the irrigation of three subdivided sectors.

Pipeline welding is an integral part of oil and gas exploration industries. Often the welded joint failures were due to lack of weld quality, improper heat treatment and even poor workmanship. Further, the use of new material in pipeline industry puts focus on a better understanding of qualifying requirements of welding for reducing the failures in future. This necessitates the need for development and design of suitable welding fluxes for joining these materials. In this paper an attempt is made to study the effects of submerged arc welding fluxes on weldability as well as structural integrity issues in pipeline steels. Physicochemical and thermophysical properties of submerged arc fluxes widely affects the mechanical behaviour of pipeline steels. This paper presents an overview of the role of welding parameters, flux composition, cooling rate, slag behaviour and physicochemical properties of slag on final welded joint properties such as tensile strength, impact toughness etc. during submerged arc welding.