Digital holography (DH) which is the technology of acquiring and processing measurement data via a CCD camera is spreading to industrial applications, finds wide employment in engineering problems of testing and investigation. In this paper, a simple digital holographic system, comprising a He-Ne laser source, CCD camera and analyzing software, is used for testing surface flatness and detecting the presence of a propagating crack on the surface plane and the effect of the crack on the neighborhood. Phase variations across the surfaces planes are extracted to represent the surface deviation from a reference plane. The analysis methods differ according to the interference fringes in the recorded holograms. Both fringe tracking and Fourier transform with phase unwrapping methods are used in the interpretation of interferometric fringe patterns.
We propose a class of m-crane control systems, that generalizes two- and three-dimensional crane systems. We prove that each representant of the described class is feedback equivalent to the second order chained form with drift. In consequence, we prove that it is differentially flat. Then we investigate its control properties and derive a control law for tracking control problem.
In Poland an increase in the of number solar thermal collectors is observed in household applications. For economic and ecological profitability the creation of a solar thermal installation design in a proper manner is essential.
In order to determine solar installations size, software calculating future solar heat gains is used. SHW software is an examples of such software. The aim of this work was to compare the simulation results with the real results of the solar installation operation. The comparison was performed by an example of a single-family house with flat plate collector installations located in south-east Poland. This installation supports domestic hot water preparation in a house occupied by four people (in two-year period of analyses). The additional heat source in this building is a gas boiler. Solar fraction parameter values were chosen for this comparison. Solar fraction is calculated as a ratio of solar heat gains used in the domestic hot water preparation process to the heat desired for domestic hot water preparation. The real results of Solar Fraction turned out to be higher than the simulation results from May to August (there were many days with Solar Fraction = 1). A difference of 20–50 percentage points was observed (Solar Fraction). Apart from this period no special differences were observed.
Additionally analyses of differences between solar heat gains calculated by Get Solar simulation software with real values (for analyzed building) was performed. This simulation analysis was done before process of building installations.
The effectiveness of half flat tip serrations on reducing fan blade trailing edge noise was investigated using experimental methods. The experiments were conducted at an anechoic chamber under different rotating fan speeds. Numerical simulations were performed to investigate the mass flow rate generated by the serrated fan and compared with that by the baseline fan. The experimental results showed that the overall amount of noise reduction decreased with the increasing of the distance away from the fan. It was found that the effectiveness of the serrations was not proportional with the rotating speed of the fan where it was most effective at 263 rpm and 2041 rpm with noise reductions about 3.1 dBA and 3.5 dBA, respectively. This phenomenon might be depended on how trailing edge vortex would interact with the serrations at different speeds of the fan. The reduction of mass flow rate reduced with the increasing of the rotating speed and the highest reduction was found at 263 rpm which was about 18% and this reduction was accompanied by overall noise reduction of 3.1 dBA.
The article presents the problem of micro-apartments. The issue is presented in a cross-sectional view, covering both the historical overview and current trends. The problem has been discussed against the background of demographic factors that justify the trend of minimizing living space. In addition to spatial issues, the paper presents the social and psychological issues related to small-scale inhabitation, as well as legal frames concerning minimal size of the flats.
Observations of the surface of the Petuniabukta tidal flat showed the occurrence of dead forms indicating a relative lowering of the sea level. Under the silt deposits of the tidal flat a gravel-clay series was found to occur. Connecting this series with the glacial till covering the lowest marine terrace and with the erosion pavement in the lowest part of the outwaśh plain gave rise to the hypothesis that there might be a record of glacier oscillation. By dating a sample taken from the gravel series substrate, the age of the oscillation was estimated at less than 6370+/- 120 years BP.
The analysis of a solar installation operation was conducted on the example of a detached house in the Lesser Poland province in Poland. A gas boiler and three flat-plate collectors are located inside the house, which are used for heating water in the hot water tank with a volume of 220 dm3. The installation was established in 2012. The heat measured system (for solar gains) was added in 2014. In 2015–2019 solar heat gains measured per area of absorber were higher than 340 kWh/m2. During a two-week period in June 2015, the insolation on the horizontal plane and the temperature were measured in 4 different points of the hot water tank. On this basis, heat losses from the storage tank were determined, i.e. a decrease in temperature during periods with and without the consumption of hot water by the residents. During this period, a temperature higher than 80°C was observed several times in the hot water tank. In two parts of the hot water tank, rhe determined temperature decreases were used to obtain the heat loss amount. In the analyzed period (2 weeks), 9 days were observed with solar heat gains higher than 9 kWh/day. For these days, the value of heat loss from the solar hot water tank was estimated at over 6 kWh/day. This data corresponds to the actual heat demand for hot water preparation in the building at 7.3 kWh/day. The correlation between daily solar heat gains and solar hot water tank heat losses were also determined. In addition, based on the amount of heat losses, the value of the tank loss coefficient was estimated. The obtained value was compared with the manufacturer’s data and reference data.
The association of phytoplasma was investigated in sand olive [Dodonaea viscosa ssp. Angustifolia (L. f.) J.G. West], cowpea [Vigna unguiclata (L.)] Wap and alfalfa (Medicago sativa L.) plants exhibiting witches broom, fasciation and little leaf symptoms, respectively. Sequence analysis of ~1.7 kb DNA fragments amplified by P1/P7 primer set confirmed the association of ‘Candidatus Phytoplasma aurantifolia’ within symptomatic alfalfa, while ‘Ca. Phytoplasma cynodontis’ was associated within cowpea and sand olive.
en
pl
