Structural design analyses of industrial dye mixing machines, concerning mixing impeller geometries, mixing performances, and power requirements aren't generally of scientific quality. Our aim is to propose a practical method for minimizing execution time, using parametric design. In this study, Visual Basic API codes are developed in order to model the impellers in SolidWorks software, and then flow analyses are conducted. Thus, velocity values and moment/torque values required for mixing operation are determined. This study is carried out for different shaft rotational speeds and different impeller diameters. Flow trajectories are obtained. After that, frequency analyses are conducted and natural frequency values are obtained. In the scope of this study, two different impeller types are investigated.
This paper explores the parametric appraisal and machining performance optimization during drilling of polymer nanocomposites reinforced by graphene oxide/carbon fiber. The consequences of drilling parameters like cutting velocity, feed, and weight % of graphene oxide on machining responses, namely surface roughness, thrust force, torque, delamination (In/Out) has been investigated. An integrated approach of a Combined Quality Loss concept, Weighted Principal Component Analysis (WPCA), and Taguchi theory is proposed for the evaluation of drilling efficiency. Response surface methodology was employed for drilling of samples using the titanium aluminum nitride tool. WPCA is used for aggregation of multi-response into a single objective function. Analysis of variance reveals that cutting velocity is the most influential factor trailed by feed and weight % of graphene oxide. The proposed approach predicts the outcomes of the developed model for an optimal set of parameters. It has been validated by a confirmatory test, which shows a satisfactory agreement with the actual data. The lower feed plays a vital role in surface finishing. At lower feed, the development of the defect and cracks are found less with an improved surface finish. The proposed module demonstrates the feasibility of controlling quality and productivity factors.
Due to the characteristics of color vegetation canopy images which have multiple details and Gaussion noise interference, the adaptive mean filtering (AMF) algorithm is used to perform the denoising experiments on noised images in RGB and YUV color space. Based on the single color characteristics of color vegetation canopy images, a simplified AMF algorithm is proposed in this paper to shorten the overall running time of the denoising algorithm by simplifying the adaptive denoising processing of the component V, which contains less image details. Experimental results show that this method can effectively reduce the running time of the algorithm while maintaining a good denoising effect.
This work proposes an optimum design and implementation of fractional-order Butterworth filter of order (1 + α), with the help of analog reconfigurable field-programmable analog array (FPAA). The designed filter coefficients are obtained after dual constraint optimization to balance the tradeoffs between magnitude error and stability margin together. The resulting filter ensures better robustness with less sensitivity to parameter variation and minimum least square error (LSE) in magnitude responses, passband and stopband errors as well as a better –3 dB normalized frequency approximation at 1 rad/s and a stability margin. Finally, experimental results have shown both lowpass and highpass fractional step values. The FPAA-configured outputs represent the possibility to implement the real-time fractional filter behavior with close approximation to the theoretical design.
The awareness of the growing importance of the complexity in creating a new type of a modern enterprise strategy and in introducing changes within planning, control and organizational structures contributed to undertaking studies on relationships occurring between the complexity of a modern enterprise and its flexibility in the sector of industrial automation, as well as filling the gap relating to the cognitive impact of poor complexity management on the flexibility of the company. The main objective of the research work is to check whether there is an important relationship between the complexity of the business and its flexibility in the industrial automation sector. Quantification of the relationship between these two quantities – the complexity and flexibility – happened by the use of the Multidimensional Correspondence Analysis (MCA) and Perceptual Maps. The study which has been carried out indicated that the flexibility and complexity functions in the enterprise management rise, however, the knowledge of these issues is highly insufficient. The research discovered that the obstacles which hamper striking a balance between the flexibility and complexity in their advanced stages exert a devastating impact on the quality of the process management. Reducing the flexibility at its higher levels generates a context in which the market risk is enhanced. Companies characterised by improper flexibility management bear higher workforce costs and their processes of decision-making last longer. Methodical and systematized study of flexibility and complexity will decrease the destructive influence of the interaction between these two categories.
Nowadays the demand for renewable energy sources is constantly growing. There are several reasons of such state, including requirements for energy-efficient new buildings and reduction of greenhouse gas emissions. An exemplary solution that may help to reduce “traditional” primary energy consumption is local energy source utilization. The article presents a simplified feasibility study of hybrid energy system under Polish law and economic conditions for a self-government unit, that is legally obliged to apply means of energy efficiency improvement. The aim of this paper is to provide a simple algorithm to find optimal hybrid PV and wind power source sizing for a prosumer. Resource data used in analyses are imported from Photovoltaic Geographical Information System and cover a period of one year. The paper includes two different methodologies applied to solve the problem of optimal hybrid energy system sizing. The first approach is heuristic and based on monthly energy balancing while the second is iterative and takes into account hourly energy balance. The results from both methods are compared and verified by HomerPro software, that shows significant differences between two algorithms. At the end economic assessment based on Net Present Value method is performed.
Positively invariant sets play an important role in the theory and applications of dynamical systems. The stability in the sense of Lyapunov of the equilibrium x = 0 is equivalent to the existence of the ellipsoidal positively invariant sets. The constraints on the state and control vectors of dynamical systems can be formulated as polyhedral positively invariant sets in practical engineering problems. Numerical checking method of positive invariance of polyhedral sets is addressed in this paper. The validation of the positively invariant sets can be done by solving LPs which can be easily done numerically. It is illustrated by examples that our checking method is effective. Compared with the now existing algebraic methods, numerical checking method is an attractive method in that it’s easy to be implemented.
The paper presents a sensorless control approach for a five-phase induction motor drive with third harmonic injection and inverter output filter. In the case of the third harmonic injection being utilised in the control, the physical machine has to be divided into two virtual machines that are controlled separately and independently. The control system structure is presented in conjunction with speed and rotor flux observers that are required for a speed sensorless implementation of the drive. The last section is dedicated to experimental results of the drive system in sensorless operation, and the uninterrupted drive operation for two open-phase faults
General lighting is the most common way of illuminating interiors and the source of electricity consumption in buildings. This fact forces the search for lighting solutions effective both for people and the environment. In this study the impact of room and luminaire characteristics on general lighting conditions and energy efficiency in interiors is considered. In rooms of different sizes and reflectances, seventeen luminaire types with various light distributions were arranged in uniform layouts. The levels of average illuminance, uniformity and normalised power density related to two horizontal working planes were calculated. The impact of working plane reduction, room index and reflectances, lighting class and luminous intensity distribution of luminaire on the considered parameters was investigated. The use of the reduced working plane resulted in the increase in the average illuminance (7.7% on average), uniformity (33% on average) and normalised power density (23% on average). The impact of the room index and lighting class on the average illuminance and normalised power density was significant while the impact of the luminaire luminous intensity distribution and room reflectances was low. The normalised power density levels of the general electric lighting in interiors, with luminaire luminous efficacy of 100 lm/W, are in the following range: 1.08‒3.42 W/m² per 100 lx. Based on these results a normalised power density level of 2 W/m² per 100 lx is recommended for designing and assessing the new general electric lighting systems in buildings.
The main aim of this work was to obtain a copper matrix surface composite using friction stir processing (FSP). The reinforced phase was SiC particles with an average size of 5 mm. The effect of the reinforcement on the microstructure, hardness and wear behaviour were analysed. The friction treatment was carried out using a truncated cone-shaped tool with a threaded side surface. Multi-chamber technology was used to produce the composite microstructure in the copper surface layer. Changes in the material microstructure were assessed by light microscopy and scanning electron microscopy. Comparative measurement of the hardness of the initial and treated material as well as wear resistance tests were also carried out. A favourable effect of the surface treatment on the microstructure and properties of the copper was found. As a result of the friction treatment there was strong grain refinement in the copper surface layer. The average grain size in the stirring zone was about 3 mm and was over 21 times smaller than the average grain size in the initial material. Intensive dispersion of the SiC particles in the modified layer was also found, leading to the formation of a copper matrix composite. The effect of microstructural changes in the surface layer of the material and formation of the surface composite was an over two-fold increase in the hardness of the material and an increase in wear resistance.
In this research work, the Ti-6Al-4V material was used for the investigation of machining parameters by means of hybrid micro electrical discharge machining to improve the machining process and reduce the negative effects of debris accumulation in the drilled hole. L9 orthogonal array was used in the Taguchi based grey relational analysis to optimize the parameters such as material removal rate and diametrical accuracy of the machining process for Ti-6Al-4V. This work encompasses the design, development, and calibration of the work piece vibration platform and experimental analysis of the process parameters by means of the hybrid micro electrical discharge machining process. The maximum material removal rate and minimum surface roughness was observed at the current value of 2.5 A, pulse on time is 2 µs and pulse off time is 14.5 µs. The maximum material removal rate was observed for the increase in pulse on time with 14.4 µs and 4 A current level. The diametrical accuracy of the microholes was increased while increasing the pulse off time and decreasing the pulse on time. The fluid flow simulation has been conducted to find out the pressure drop and to know the velocity of the flow inside the hole for the effective flushing of the debris during machining.
Improving application efficiency is crucial for both the economic and environmental aspects of plant protection. Mathematical models can help in understanding the relationships between spray application parameters and efficiency, and reducing the negative impact on the environment. The effect of nozzle type, spray pressure, driving speed and spray angle on spray coverage on an artificial plant was studied. Artificial intelligence techniques were used for modeling and the optimization of application process efficiency. The experiments showed a significant effect of droplet size on the percent area coverage of the sprayed surfaces. A high value of the vertical transverse approach surface coverage results from coarse droplets, high driving speed, and nozzles angled forward. Increasing the vertical transverse leaving surface coverage, as well as the coverage of the sum of all sprayed surfaces, requires fine droplets, low driving speed, and nozzles angled backwards. The maximum coverage of the upper level surface is obtained with coarse droplets, low driving speed, and a spray angle perpendicular to the direction of movement. The choice of appropriate nozzle type and spray pressure is an important aspect of chemical crop protection. Higher upper level surface coverage is obtained when single flat fan nozzles are used, while twin nozzles produce better coverage of vertical surfaces. Adequate neural models and evolutionary algorithms can be used for pesticide application process efficiency optimization.
Polyvinylidene fluoride (PVDF) is one of the most important piezoelectric polymers. Piezoelectricity in PVDF appears in polar b and ɣ phases. Piezoelectric fibers obtained by means of electrospinning may be used in tissue engineering (TE) as a smart analogue of the natural extracellular matrix (ECM). We present results showing the effect of rotational speed of the collecting drum on morphology, phase content and in vitro biological properties of PVDF nonwovens. Morphology and phase composition were analyzed using scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR), respectively. It was shown that increasing rotational speed of the collector leads to an increase in fiber orientation, reduction in fiber diameter and considerable increase of polar phase content, both b and g. In vitro cell culture experiments, carried out with the use of ultrasounds in order to generate electrical potential via piezoelectricity, indicate a positive effect of polar phases on fibroblasts. Our preliminary results demonstrate that piezoelectric PVDF scaffolds are promising materials for tissue engineering applications, particularly for neural tissue regeneration, where the electric potential is crucial.
The use of fractional-order calculus for system modeling is a good alternative to well-known classic integer-order methods, primarily due to the precision with which the modeled object may be mapped. In this study, we created integer and fractional discrete models of a real object – a highspeed brushless micro-motor. The accuracy of the models was verified and compared.
In this study, the optimization of air gap magnetic flux density of open slotted axial flux permanent magnet (AFPM) machine which was developed for wind turbine has been obtained using the Taguchi experimental method. For this, magnetic analyzes were performed by ANSYS Maxwell program according to Taguchi table. Then the optimum values have been determined and the average magnetic flux density values have been calculated for air gap and iron core under load and no-load conditions with ANSYS Maxwell. Traditionally, 15625 analyzes are required for 6 independent variables and 5 levels when experimental method is used. In this study, optimum values are determined by 25 magnetic analyzes, which use L25 orthogonal array. For this purpose, both factor effect graph and signal to noise ratios are used, according to the factors and levels which are obtained from the factor effect graph and the signal to noise ratio. Parameters are re-analyzed by Maxwell. The optimum factors and levels are determined. For optimized values, the air gap magnetic flux density is improved by 65.7% and 173.26%, respectively, according to the average value and the initial design. Therefore, the variables are optimized in a shorter time with Taguchi experimental design method instead of the traditional design method for open slotted AFPM generator. In addition, the results were analyzed statistically using ANOVA and Regression model. The variables were found to be significant by ANOVA. The degree of influence of the variables on the air gap magnetic flux density was also determined by the Regression model.
The paper addresses the problem of placement of sectionalizing switches in medium voltage distribution networks. Proper placement of sectionalizing switches is one of the elements leading to higher power networks reliability. The methods of optimal allocation of such switches in a MV distribution network are presented in the paper. SAIDI was used as a criterion for the sectionalizing switches placement. For selecting optimum placements, three methods were used: brute force method, evolutionary algorithm and heuristic algorithm. The calculations were performed for a real MV network.
In this experimental investigation, the critical heat flux (CHF) of aqua-based multiwalled carbon nanotube (MWCNT) nanofluids at three different volumetric concentrations 0.2%, 0.6%, and 0.8% were prepared, and the test results were compared with deionized water. Different characterization techniques, including X-ray diffraction, scanning electron microscopy and Fourier transform infrared, were used to estimate the size, surface morphology, agglomeration size and chemical nature of MWCNT. The thermal conductivity and viscosity of the MWCNT at three different volumetric concentrations was measured at a different temperature, and results were compared with deionized water. Although, MWCNT-deionized water nanofluid showed superior performance in heat transfer coefficient as compared to the base fluid. However, the results proved that the critical heat flux is increased with an increase in concentrations of nanofluids.
The paper presents the possibility of fabricating ceramic-metal composites by an innovative method of centrifugal slip casting in the magnetic field. It was examined whether the use of this method would allow obtaining a gradient concentration of metal particles in the ceramic matrix. In the applied technique, the horizontal rotation axis was used. The study investigated the effect of solid phase content on the properties and microstructure of the products. Water-based suspensions with 35, 40, 45 and 50 vol.% of solid-phase content were prepared with 10 vol.% additional of nickel powder. The viscosity of prepared slurries was considered. The gradient distribution of nickel particles in the zirconia matrix was observed on SEM. Vickers hardness of ZrO2-Ni composites has been measured. The research revealed that the physical properties depend on the volume fraction of solid content and increase as the volume of solid content increases.
In an effort to achieve an optimal availability time of induction motors via fault probabilities reduction and improved prediction or diagnostic tools responsiveness, a conditional probabilistic approach was used. So, a Bayesian network (BN) has been developed in this paper. The objective will be to prioritize predictive and corrective maintenance actions based on the definition of the most probable fault elements and to see how they serve as a foundation for the decision framework. We have explored the causes of faults for an induction motor. The influence of different power ranges and the criticality of the electric induction motor are also discussed. With regard to the problem of induction motor faults monitoring and diagnostics, each technique developed in the literature concerns one or two faults. The model developed, through its unique structure, is valid for all faults and all situations. Application of the proposed approach to some machines shows promising results on the practical side. The model developed uses factual information (causes and effects) that is easy to identify, since it is best known to the operator. After that comes an investigation into the causal links and the definition of the a priori probabilities. The presented application of Bayesian networks is the first of its kind to predict faults of induction motors. Following the results of the inference obtained, prioritizations of the actions can be carried out.
Short-term contact losses between a pantograph and a contact wire are not included in the standards nor are they taken into account in evaluating pantograph-contact wire interaction. These contact losses, however, accelerate wear and tear as well as disturb operation of vehicles’ drive systems. The article presents the effects of short-term contact breaks as well as an analysis of impact of contact breakages on a vehicle’s current at 3 kV DC power supply. Results of voltage and current oscillations measured in real conditions when pantograph of a DC driven chopper vehicle was running under isolators were presented. Then a simulation model of a vehicles with ac motors and voltage inverters was derived to undertake simulation experiments verifying operation of such a vehicle in condition similar to those measured in real condition.
In the paper, maximal values xe(τ) of the solutions x(t) of the linear differential equations excited by the Dirac delta function are determined. There are obtained the analytical solutions of the equations and also the maximal positive values of these solutions. The obtained sufficient conditions of the positivity of these solutions are defined by the Theorems. There are also formulated the necessary conditions of the positivity of these solutions. The analytical formulae enable the design of the system with prescribed properties [3].
The current passed by the stator coil of the permanent magnet synchronous motor (PMSM) provides rotating magnetic field, and the number of turns will directly affect the performance of PMSM. In order to analyze its influence on the PMSM performance, a 3 kW, 1500 r/min PMSM is taken as an example, and the 2D transient electromagnetic field model is established. The correctness of the model is verified by comparing the experimental data and calculated data. Firstly, the finite element method (FEM) is used to calculate the electromagnetic field of the PMSM. The performance parameters of the PMSM are obtained. On this basis, the influence of the number of turns on PMSM performance is quantitatively analyzed, including current, no-load back electromotive force (EMF), overload capacity and torque. In addition, the influence of the number of turns on eddy current loss is further studied, and its variation rule is obtained, and the variation mechanism of eddy current loss is revealed. Finally, the temperature field of the PMSM is analyzed by the coupling method of electromagnetic field and temperature field, and the temperature rise law of PMSM is obtained. The analysis of this paper provides reference and practical value for the optimization design of PMSM.
A comparative analysis of filtration performance of tangential and axial
inlet reverse-flow cyclone separators and vortex tube separators is
presented. The study showed that vortex tube separators are
characterized by a quality factor q several time higher
than tangential inlet reverse-flow cyclone separators. The cyclone
separators yield low separation efficiency and low filtration
performance at low air flow rates at low air volumes aspired by the
engine at low speed. One of the well-known and not commonly used methods
to improve separation efficiency is to apply electric field. An original
design of a vortex tube separator with insulators generating electric
field in the area of aerosol flow is presented. High voltage was applied
to the cyclone separator housing and its swirl vane. A special method
and test conditions were developed for cyclone separators with electric
field. Separation efficiency, filtration performance and pressure drop
across the cyclone separator in two different variants were determined.
The tests were carried out at five inlet velocity of cyclones υ0
= 1.75; 3.5; 7.0; 10.5; 14 m/s at an extraction rate of m0
= 10%, and at an average dust concentration in the inlet air of
s
= 1 g/m3. Using the electric field in the area of
a swirling aerosol stream resulted in an increase (over 12% – φc
= 96.3%) in separation efficiency at inlet velocity of cyclone ranging
from 1.75 to 3.5 m/s. An increase in separation efficiency at other
inlet velocity of cyclone is minor and does not exceed 3‒4%.
Based on the rolling bearing vibration measurement principle in ISO standard, a nonlinear dynamic model of ball bearing is built and motion equations of the inner ring, outer ring, and rolling elements are derived by using Lagrange’s equation. The ball bearing model includes the influence of waviness, rotational speed, external load, arbor supporting stiffness and arbor eccentricity. Ball bearing high-speed vibration tests are performed and used to verify the theoretical results. Simulated results showed that specific waviness orders produced the principal frequencies that were proportional to rotational speed. Rotational speed mainly affected the value of the natural frequency of the bearing system, and RMS (Root Mean Square) of the full band had a great fluctuation with the increase of rotational speed. In the experiment, spectrum and RMS of 2fs-30 kHz (fs: the rotational frequency of inner ring/arbor) under high speed could include not only the influence of rotational speed but also principal frequencies produced by waviness, which could cover the part of requirements of the standard bearing vibration measurement.