Despite the large number of studies conducted on teachers’ oral corrective feedback, the findings of these studies have been mainly limited to cognitive orientations rooted in experimental designs and the verbal discourse of the teacher as the main object of inquiry. Considering teachers’ affective concerns regarding their corrective feedback and the shift from negative psychology to positive psychology in the field of second/foreign language teaching as well as the entirety of the teacher’s corrective repertoire, in this case study, we aimed to explore the enjoyment building capacity of a teacher’s multimodal corrective feedback in a university general English course. We video-recorded the teacher’s multimodal corrective feedback including verbal and nonverbal semiotic resources like gesture, gaze, and posture while observing the learners’ emotional experiences for eight sessions. We also conducted stimulated recall interviews with some learners and collected their written journals about the experiences of enjoyment with regard to the teacher’s multimodal corrective feedback scenarios. The teacher’s multimodal corrective feedback was analyzed through systemic functional multimodal discourse analysis (SF-MDA) and the content of the interview transcripts as well as the written journals were qualitatively analyzed. The findings indicated that the teacher’s inherent multimodality in his corrective feedback broadened the main dimensions of enjoyment by raising the learners’ attention to their errors, heightening their focus on the correct form, and increasing the salience of his corrective feedback. Further arguments regarding the findings are discussed.

Student engagement and burnout have become the latest focus of attention among researchers and practitioners. This is because both are seen as the main factors connected with the meaningful and purposeful educational activities that lead to high learning outcomes and better physical and mental health. Specifically, burnout decreases, and engagements heightened these characteristics.

The aim of the present study was to explore the relationships between alienation, engagement and burnout in an educational context. Additionally, the mediation role of school engagement on the association between alienation and burnout was tested.

The study was conducted among 109 early adolescents, aged 13–15 years (NFemale=52). ESSBS (Elementary Student School Burnout Scale), PAI (Alienation Inventory – Short Form) and SSEM (Student School Engagement Scale) were used to measure the levels of burnout, alienation and engagement, respectively.

The results indicated that higher alienation was associated with lower engagement and with higher school burnout. Student engagement, productivity and belonging significantly mediated the links between alienation total score, normlessness, powerlessness and school burnout. The path analysis revealed that normlessness significantly predicted student engagement (-.44) and school burnout (-.20). The model explained 31% of the variances for school engagement, and 46% of the variances for school burnout.

In conclusion, alienated students – especially those suffering from normlessness – feel disconnected and overwhelmed by school duties. In addition, to diminish the risk of alienation and burnout in a school context of students, educational practitioners should include school engagement (especially belonging and productivity) improvement as one of the most significant protective factors.

This study included investigation of efficiency of the threshold used to classify symptoms as present, investigation of efficiency of the cut-off point used to identify potentially addicted to work individuals, investigation of magnitude of the problem of class overlap, and investigation of effects of dichotomization of polytomous items on the estimates of the latent trait level. The sample comprised 16,426 working Norwegians (Mage = 37.31; SD = 11.36) who filled out the Bergen Work Addiction Scale (BWAS). The results showed that the difficulty/third threshold parameters corresponding to the threshold used to classify symptoms as present were lower than 1.5 for the items corresponding to tolerance and conflict and higher than or equal to 1.5 for the items corresponding to salience, mood modification, relapse, withdrawal, and problems. The cut-off point used to identify individuals as potentially addicted to work identified 411 individuals (31.9% of all individuals classified by the polythetic approach as potentially addicted to work) whose estimates of the latent trait level were lower than 1.5 as potentially addicted to work. The problem of class overlap (being classified by the polythetic approach into different class despite almost the same level of the latent trait) affected 4,686 individuals (28.5% of the whole sample). The dichotomization of polytomous items had a substantial effect on the estimates of the latent trait level. The findings show that the polythetic approach is not efficient in identifying potentially addicted to work individuals and that the prevalence rates of work addiction based on the polythetic approach are not trustworthy.

Values define the directions of human activities and are related to people’s motivation to undertake specific activities and roles (Schwartz, 1994; Brown, 2002). Researchers and employers observe differences in motivation to work among representatives of different generations and genders (Twenge, Campbell, & Freeman, 2012; Gursoy & Karadag, 2013). In this research project, the authors asked what motivated contemporary employees, whether the intensity of their motives was different in different generations, what relationships there were between the dominant work motives and employees’ dominant values, and whether there were differences between women and men regarding work motives. To verify the hypotheses, they conducted a study with a sample of 307 professionally active people. They used their own Types of Work Motives Questionnaire designed for the purposes of the study and the Valued Living Questionnaire (VLQ; Wilson & Murrell, 2004). The obtained results indicate that younger employees choose the kind of work that gives them comfort and adequate pay. Regardless of age, however, social security support is the most important for all groups of respondents. For women, security and social security support are important at work. Moreover, the study has shown that there is a relationship between work values and work motives. For example people who appreciate values such as friendship and stability are motivated to work by good relationships and security, those who value recreation and stability are motivated by comfort and salary, those for whom respect and education are crucial are motivated by the possibility of development etc.

People appear in the courtroom when they engage in various disputes with others and have diverse problems of their own. The courts are supposed to provide them with a space where they can obtain justice, in accordance with the law. It is no less important, however, that while pursuing this goal the courts should deal with people’s problems in a way that makes the people willing to accept and comply with their decisions. The central issue defining the scope of this empirical study was the question of what element of the construct of procedural justice promotes behaviors associated with legitimacy and compliance with the law in the Polish judicial system. The author set out to investigate what identified procedural justice in Polish legal culture and what variables pertaining to the context of legal proceedings it was related to. The sample consisted of 115 individuals taking part in civil court proceedings conducted in civil divisions of district courts. Based on analyses performed on research results it can be concluded that behaviors associated with legitimacy and compliance with the law in the Polish judicial system is determined by the sense of fairness experienced in the courtroom, whose structure is built by experiences such as being given the opportunity to speak, being treated with respect, the judge’s impartiality, the comprehensibility of the language used and procedures applied in the courtroom, and the sense of influence on the final outcome of the proceedings.

The functioning of a person affected with a chronic illness within a family is a complex and many-sided issue.

As family members form a system reflecting a network of mutual relations, one of the members’ illness will affect all those interacting with him / her emotionally. Keeping high-quality marital relations also becomes extremely difficult. The research covered 108 families (216 person) divided into three groups.We used an interview, the FACES IV questionnaire based on the Circumplex Model by David H. Olson and Dyadic Adjustment Scale (DAS) developed by Spanier.

Presence of multiple sclerosis (MS) in the family turned out to impact its functioning. The present research has found that the spouses’ gender of key importance for the family. Those families in which the woman was ill were characterized by excessive rigidity. On the other hand, where the multiple sclerosis sufferer was male, the system was overly chaotic.

Based on the research, it is highly probable that the majority of families with multiple sclerosis sufferers adjust relatively well to the disease. It can be supposed that the majority of multiple sclerosis affected families have developed an adaptive mechanism that benefits the patient. Supposedly, successful coping with disease may be determined by the caregiver's gender. This does not mean, however, that such families are free from problems. The difficulties relate primarily to communication, excessive autocracy, developing their individuality and autonomy. Therapeutic support for the patient and his / her family should therefore be a vital component of the treatment process.

During occupational trainings given to Polish employees, one can quite often observe complaining. The instructor can use it for problem-solving or for purification. Thus, complaining plays an instrumental or cathartic function. This has consequences for the entire training process. The aim of the article is to present the phenomenon of complaining during training courses and to discuss its correlation with different variables such as learning results, participants’ mood and the evaluation of the training course. Questions were therefore posed about which function of complaining would be more conducive to the process of learning the material and result in an improvement of the participants’ mood, as well as how the instructor would be evaluated, at the response level, depending on which function of complaining is activated during the training. In order to answer these questions, the authors designed an experiment in which complaining was induced in members of an organization, performing either an instrumental function or a cathartic function. The results show that the most effective strategy is the use of its object as a point of departure for problem solution.

Schwartz created a circle of values reflecting people’s individual systems of goals and motivations. These values can be grouped into different dimensions: self-protection versus self-growth and concentration on others versus concentration on self. In the present study, we analysed how these dimensions are related to hedonic and eudaimonic well-being; N=747 participants, representative of the general Polish population, completed the Portraits Value Questionnaire, Satisfaction with Life Scale and Questionnaire for Eudaimonic Well-being (online study). A series of models were tested using structural equation modelling. We found that concern for self and self-protection values were related to higher hedonic well-being, whereas concern for others and growth values were related to its lower levels. However, growth and concern for others were positively linked to eudaimonic well-being, but they may also positively and indirectly impact hedonic well-being (suppression effect). These results suggest that some values are associated with a feeling of self-realisation at the cost of current hedonic well-being.

When a single line-to-ground fault occurs in the ungrounded distribution system, the steady-state fault current is relatively small for fault analysis and the transient fault current is observable, which can be used for faulted feeder identification and location. The principal frequency component retains most of the characteristics of the transient current. The principal frequency is related to the distance from the fault point to the substation and can be used for fault location. This paper analyzes the sequence network model of a single line-to-ground fault in the distribution network, and gives a method for principal frequency calculation. Depending on the characteristics of the maximum amplitude of the principal frequency component of the faulted feeder, the method of faulted feeder identification is given. Based on the complementary characteristics of the phase angle of the principal frequency component of the fault current and the phase angle at the substation bus, the faulted section location is carried out. MATLAB simulation is used to verify the effectiveness of the faulted feeder identification and location method.

The grid integration of large-scale wind and solar energy affects the power flow of wind-PV-thermal-bundled power transmission systems and may introduce an unpredicted threat to the power system’s small signal stability. Meanwhile, a power system stabilizer (PSS) and static synchronous series compensator (SSSC) play an important role in improving the static and dynamic stability of the system. Based on this scenario and in view of the actual engineering requirements, the framework of wind-PV-thermal-bundled power transmitted by an AC/DC system with the PSS and SSSC is established considering the fluctuation of wind and photovoltaic power output and the characteristics of the PSS and SSSC. Afterwards, the situation model is constructed in the IEEE 2-area 4-unit system, and the influence of the PSS and SSSC on the system stability under different operating conditions is analyzed in detail through eigenvalue analysis and time-domain simulation. Finally, an index named the gain rate is defined to describe the improvement of the stability limitations of various wind-PV-thermal operating conditions with the PSS and SSSC. The results indicate (K) that the damping characteristics, dynamic stability and stability limitations for various wind-PV-thermal operating conditions of the wind-PV-thermal-bundled power transmission system can be significantly improved by the interaction of the PSS and SSSC.

With the availability of UHV engineering technology, the scale of the power network is expanding, and the level of the short-circuit current is getting higher, which brings hidden trouble to the safe and stable operation of the power network. Further this article issued a method that optimized the configuration of a current limiter based on the reliability of the power network. According to the reliability analysis under the influence of a short circuit, the quantitative evaluation of reliability of the power network is realized by the calculation of the short-circuit current.Aquantitative model is established among reliability evaluation and the short-circuit current as well as load loss, the candidate installation site of a current limiter can be determined according to reliability quantification results. This method uses the particle swarm optimization algorithm to optimize the distribution of the limiter, aiming at the reliability level and the minimum number of current limiters in the short circuit of a power grid. Finally, taking the actual power grid of a province as an example, the result shows that this method can reduce the search space of the optimal solution, optimize the configuration of the current limiter, and effectively limit the short-circuit current and improve the reliability of the power network.

The article presents studies on the electromechanical system of a metallurgical horizontal looper in the steelmaking industry. During the operation of this unit, parameters in the system changes due to variations of length and mass of the steel strip, these variations significantly change elastic properties and reduce moments of inertia. Various methods of combating elastic vibrations in electromechanical systems are analyzed in this article. The article presents a description of experiments with a horizontal looper. A mathematical model for two extreme positions of the unit was developed based on experimental results. Simulation experiments were made and their results are presented. A new control system structure is proposed to reduce vibrations in the electromechanical system of a horizontal looper. A power-up sensor, adjuster and velocity derivative feedback were added into the model structure. The proposed feedback link structure takes into account the change of steel strip length. From the experimental data it follows that the proposed system provides effective damping of mechanical vibrations in the steel strip if its length during operation is changed.

A lightning protection system (LPS) of an urban 110 kV substation is designed and analysed according to NFPA 780 and IEC 62305-3 standards. The analysis of the LPS is established on the value of risk assessment. The total area of the plant is described by one soil layer with uniform resistivity. This study aims to improve the understanding of an unexpected manner of the grounding system beneath lightning currents by clarifying the basic concepts of the lightning protection level and the new design procedure in this paper was clarified according to NFPA-780 level 1 for a lightning protection system. The program is integrated with the CDEGS software, which provides effective geometrical modeling with object and result visualization. Furthermore, module and automated fast Fourier transform (FFT) is implemented in this study to simulate electromagnetic fields in the time and frequency domains. These current values are compared to the desired protection levels within the standards. The study results show that for the improved protection of the system against lightning, the total power grid must be considered as a source of improvement for studying shielding influence and the protection levels provided inside this substation.

One of the least expensive and safest diagnostic modalities routinely used is ultrasound imaging. An attractive development in this field is a two-dimensional (2D) matrix probe with three-dimensional (3D) imaging. The main problems to implement this probe come from a large number of elements they need to use. When the number of elements is reduced the side lobes arising from the transducer change along with the grating lobes that are linked to the periodic disposition of the elements. The grating lobes are reduced by placing the elements without any consideration of the grid. In this study, the Binary Bat Algorithm (BBA) is used to optimize the number of active elements in order to lower the side lobe level. The results are compared to other optimization methods to validate the proposed algorithm.

In recent years, power systems have been pushed to operate above their limits due to the increase in the demand for energy supply and its usage. This increase is accompanied by various kinds of obstructions in power transmission systems. A power system is said to be secured when it is free from danger or risk. Power systems security deals with the ability of the system to withstand any contingencies without any consequences. Contingencies are potentially harmful disturbances which occur during the steady state operation of a power system. Load flow constitutes the most important study in a power system for planning, operation, and expansion. Contingency selection is performed by calculating two kinds of performance indices; an active performance index (PIP) and reactive power performance index (PIV) for a single transmission line outage. In this paper, with the help of the Newton Raphson method, the PIP and PIV were calculated with DIgSILENT Power Factory simulation software and contingency ranking was performed. Based on the load flow results and performance indexes, the Ethiopian Electric Power (EEP) North-West region network is recommended for an upgrade or the reactive power or series compensators should be constructed on the riskiest lines and substations.

One of the most critical systems of any satellite is the Electrical Power System (EPS) and without any available energy, the satellite would simply stop to function. Therefore, the presented research within this paper investigates the areas relating to the satellite EPS with the main focus towards the CubeSat platform. In this paper, an appropriate EPS architecture with the suitable control policy for CubeSat missions is proposed. The suggested control strategy combines two methods, the Maximum Power Point Tracking (MPPT) and the Battery Charge Regulation (BCR), in one power converter circuit, in order to extract the maximum power of the Photovoltaic (PV) system and regulate the battery voltage from overcharging. This proposed combined control technique is using a Fuzzy Logic Control (FLC) strategy serving two main purposes, the MPPT and BCR. Without an additional battery charger circuit and without switching technique between the two controllers, there are no switching losses and the efficiency of the charging characteristic can be increased by selecting this proposed combined FLC. By testing a space-based PV model with the proposed EPS architecture, some simulation results are compared to demonstrate the superiority of the proposed control strategy over the conventional strategies such as Perturb and Observe (P&O) and FLC with a Proportional Integral Derivative (PID) controller.

Afeeder automation (FA) system is usually used by electricity utilities to improve power supply reliability. The FA system was realized by the coordinated control of feeder terminal units (FTUs) in the electrical power distribution network. Existing FA testing technologies can only test basic functions of FTUs, while the coordinated control function among several FTUs during the self-healing process cannot be tested and evaluated. In this paper, a novel cloud-based digital-physical testing method is proposed and discussed for coordinated control capacity test of the FTUs in the distribution network. The coordinated control principle of the FTUs in the local-reclosing FA system is introduced firstly and then, the scheme of the proposed cloud-based digital-physical FA testing method is proposed and discussed. The theoretical action sequences of the FTUs consisting of the FTU under test and the FTUs installed in the same feeder are analyzed and illustrated. The theoretical action sequences are compared with the test results obtained by the realized cloud-based simulation platform and the digital-physical hybrid communication interaction. The coordinated control capacity of the FTUs can be evaluated by the comparative result. Experimental verification shows that the FA function can be tested efficiently and accurately based on our proposed method in the power distribution system inspection.

In this paper, a rotor current fault monitoring method is proposed based on a sliding mode observer. Firstly, the state-space model of the Double-Fed Induction Generator (DFIG) is constructed by vector transformation. Meanwhile, the stator voltage orientation vector control method is applied to decouple a stator and rotor currents, so as to obtain the correlation between the stator and rotor current. Furthermore, the mathematical model of stator voltage orientation is obtained. Then a state sliding mode observer (SMO) is established for the output current of the rotor of the DFIG. The stability and reachability of the system in a limited time is proved. Finally, the system state is determined by the residuals of the measured and estimated rotor currents. The simulation results show that the method proposed in this paper can effectively monitor the status: a normal state, voltage drop faults, short-circuit faults between windings, and rotor current sensor faults which have the advantages of fast response, high stability.

In this paper, a study of the lightning phenomenon and its harmful effect on Aqaba Thermal Power Station (ATPS), located in the south-western border of Jordan, is presented using the Electromagnetic Transients Program – Alternative Transients Program (EMTP- ATP). This study has been arisen due to an installation need of appropriate lightning arresters (LAs) for the 15/410 kV step-up transformers of the ATPS to eliminate the destructive effect of lightning. The simulation is carried out for two cases, once without using LAs and once more with using them. Two scenarios are applied for each of these cases, once when lightning strikes the primary side of the transformer and once more when it strikes the secondary side. The results obtained by the simulation indicate the necessity of LAs installation. This study, with using the EMTP-ATP program, is done for the first time with additional details that help researchers, designers, and engineers to get a broad overview of the ATPS in order to protect it against lightning.

Current networks are designed for peak loads leading to low utilization of power resources. In order to solve this problem, a heuristic energy-saving virtual network embedding algorithm based on the Katz centrality (Katz-VNE) is proposed. For solving an energy-saving virtual network embedding problem, we introduce the Katz centrality to represent the node influence. In order to minimize the energy consumption of the substrate network, the energy-saving virtual network embedding problem is formulated as an integer linear program, and the Katz-VNE is used to solve this problem. The Katz-VNE tries to embed the virtual nodes onto the substrate nodes with high Katz centrality, which is effective, and uses the shortest paths offering the best factor of bandwidths to avoid the hot nodes. The simulation results demonstrate that the long-term average energy consumption of the substrate network is reduced significantly, and the long-term revenue/cost ratio, the acceptance rate of virtual network requests, and the hibernation rate of substrate nodes as well as links are improved significantly.

The purpose of this paper is to show possibility and advantages of initial control plane reproduction for an adaptive fuzzy controller. Usually the fuzzy control is used when the object is not very well known. Yet the truth is, however, that some, at least general information about the object, is available. Usually, in such a case, optimization algorithms are used to tune the control structure. The purpose of this article is to show how to find a starting point that is closer to optimum than a statistically random point, and this way to obtain better results in a shorter time.

The article proposes the method of synthesis of active elements with time-varying parameters R(t), C(t) and L(t). In order to construct the elements, it is necessary to use operational amplifiers, multipliers and classic RLC components. The variability in time of the elements results from applying voltage to control terminals. Assuming that the parameters of elements R(t), L(t), C(t) are exponentially varying, dependencies describing the control voltage waveforms which enable such a parameter variability were determined. The obtained results were illustrated with examples and PSpice simulations.

In order to control joints of manipulators with high precision, a position tracking control strategy combining fractional calculus with iterative learning control and sliding mode control is proposed for the control of a single joint of manipulators. Considering the coupling between joints of manipulators, a fractional-order iterative sliding mode cross-coupling control strategy is proposed and the theoretical proof of its progressive stability is given. The paper takes a two-joint manipulator as the research object to verify the control strategy of a single-joint manipulator. The results show that the control strategy proposed in this paper makes the two-joint mechanical arm chatter less and the tracking more accurate. The synchronous control of the manipulator is verified by a three-joint manipulator. The results show that the angular displacement adjustment times of the three-joint manipulator are 0.11 s, 0.31 s and 0.24 s, respectively. 3.25 s > 5 s, 3.15 s of a PD cross-coupling control strategy; 2.85 s, 2.32 s, 4.22 s of a PD iterative cross-coupling control strategy; 0.14 s, 0.33 s, 0.28 s of a fractional-order sliding mode cross-coupling control strategy. The root mean square error of the position error of the designed control strategy is 6.47 × 10-6 rad, 3.69 × 10-4 rad, 6.91 × 10-3 rad, respectively. The root mean square error of the synchronization error is 3.96 × 10-4 rad, 1.36 × 10-3 rad, 7.81 × 10-3 rad, superior to the other three control strategies. The results illustrate the effectiveness of the proposed control method.

The first part of the paper concentrates on the motive of desire, strictly related to the concept of will, in two stories from Les Ombres sanglantes [The Bloody Shadows] (1820) by J. P. R. Cuisin. Afterwards, the theme of power, considered firstly in the physical aspect and then in its supernatural dimension, is analyzed in further four stories. The article concludes with thoughts on the literary objectives of Cuisin’s book and on its potentially caricatural side.