An Internet application was developed to support the design process of the WLAN access network. The whole program was designed as a desktop application using the following languages: HTML, CSS and JavaScript. The main task of the application facilitates the planning process of the WLAN access network, including the location of multiple base stations. There is an example of using the program in the WLAN network planning process. The main purpose of this application as the ability to carry out network planning using multiple base stations and provide radio coverage for the entire area served by Wireless Internet Service Provider, is obtained.

The subject of the article is the design and practical implementation of the wireless mesh network. IQRF radio modules were used for the network design. The IQRF® technique has enabled the construction of a mesh network with the possibility of reconfiguration. The theoretical part contains a description of the IQRF® hardware solutions used. The practical scope includes the design part, where the configuration of the radio modules was carried out and the parameters of the radio network were set to allow its implementation in various topologies. Then, a wireless network consisting of 10 IQRF modules was launched in the P3 building of the Opole University of Technology. At this stage, configured radio modules were placed in selected rooms on all five floors of the building in order to carry out tests of the radio network constructed in this way. The tests included measuring the packet transmission delay time as well as the received signal strength. Research was carried out for several network topologies.

In this article, an analysis of an innovative system for filtering signals in the audible range (16 Hz - 20 kHz) on programmable logic devices using a filters with a finite impulse response, is presented. Mentioned system was neat combination of software and hardware platform, where in the program layer a multiple programming languages including VHDL, JavaScript, Matlab or HTML were used to create completely useful application. To determine the coefficients of polynomial filters the Matlab Filter Design & Analysis Tool was used. Thanks to the developed graphic layer, a user-friendly interface was created, which allows easily transfer the required coefficients from the computer to the executive system. The practical implementation made on the FPGA platform, specifically on the Altera DE2- 115 development kit with the FPGA Cyclone IV, was compared with simulation realization of Matlab FIR filters. The performed research confirm the effectiveness of filtration in real time with up to 128th order of the filter for both audio channels simultaneously in FPGA-based system.