Acoustic signal is more and more frequently used to diagnose machines operated in industrial conditions where installation of sensors is hindered. Impact of background noise seems to be the major problem as part of analysis of such signal. In most cases of industrial environments, background level is high; thus, it prevents against concluding as per standard methods that have been used in diagnostic testing. This study specifies the problem related to diagnosing machines operated under variable loads. Synchronous methods are used for diagnosing these types of machines, those include synchronisation of diagnostic signal with revolutions of the diagnosed machine. For the purpose of this study an acoustic signal was used as the diagnostic signal. Application of the synchronous method (order analysis) enables eliminating an impact of background noise derived from other sources. This study specifies application of acoustic signal to diagnose planetary gear in laboratory testing rig in order to discover damages at early stage of degradation. This method was compared with the method basing on measurement of vibrations.

The acoustic climate assessment needed for the selection of solutions (technical, legal and organisational), which will help to minimise the acoustic hazards in the analysed areas, is realised on the basis of acoustic maps. The reference computational algorithms, assigned to them, require very thorough preparation of input data for the considered noise source model representing - in the best possible way - the acoustic climate. These input data are burdened with certain uncertainties in this class of computational tasks. The uncertainties are related to the problem of selecting proper argument values (from the interval of their possible variability) for the modelled processes. This situation has a direct influence on the uncertainty of acoustic maps.

The idea of applying the interval arithmetic for the assessment of acoustic models uncertainty is formulated in this paper. The computational formalism assigned to the interval arithmetic was discussed. The rules of interval estimations for the model solutions determining the sound level distribution around the analysed noise source - caused by possible errors in the input data - were presented. The application of this formalism was illustrated in uncertainty assessments of modelling acoustic influences of the railway noise linear source on the environment.

The specific working conditions of the wind turbine in strong wind cause a number of problems in the measurement of noise indicators used in its short and long-term assessment. The wind is a natural working environment of the turbine, but it also affects the measurement system, moreover, it can be a secondary source of other sounds that interfere with the measurement. One of the effective methods of eliminating the direct impact of wind on the measurement system is placing the microphone on the measurement board at ground level. However, the obtained result can not be directly compared with the admissible values, as it has to be converted to a result at a height of 4 m. The results of previous studies show that this relation depends, inter alia, on the speed and direction of the wind. The paper contains the results of measurements on the measurement board, according to EN 61400-11:2013, and at a height of 4 m above ground made simultaneously in three points around the 2 MW turbine at various instantaneous speeds and changing wind directions. Analysis of the impact of measuring point location on the measurement result of noise indicators and the occurrence of additional features affecting the relationship between the values measured on the board and at the height of 4 m, and especially the tonality, amplitude modulation and content of low frequency content, was m