One of the most effective designs to control the road traffic noise is the T-shaped barrier. The aim of this study was to examine the performance of T-shape noise barriers covered with oblique diffusers using boundary element method. A 2D simulation technique based on the boundary element method (BEM) was used to compute the insertion loss at the center frequency of each one-third octave band. In designed barriers, the top surface of the T-shaped noise barriers was covered with oblique diffusers. The width and height of the barrier stem and the width of its cap were 0.3, 2.7, and 1 m, respectively. Angles of he oblique diffusers were 15, 30, and 45 degrees. The oblique diffusers were placed on the top surface with two designs including same oblique diffusers (SOD) and quadratic residue oblique diffusers (QROD). Barriers considered were made of concrete, an acoustically rigid material. The barrier with characteristics of QROD, forward direction, and sequence of angles (15, 30, and 45 degrees) had the greatest value of the overall A-weighted insertion loss equal to 18.3 to 21.8 dBA at a distance of 20 m with various heights of 0 to 6 m.
If we want to provide the efficient training intervention to increase the duration of using hearing protection devices (HPDs) by workers, we need a tool that can estimate the person’s hearing threshold taking into account noise exposure level, age, and work history, and compare them with audiometry to find out the percent reduction of workers hearing loss.
First, the workers noise exposure level was determined according to ISO 9612, then 4000 Hz audiometry was done to find age and work history. On basis of ISO 1999 the hearing threshold was estimated and if the hearing protection device was not used continuously and correctly, the hearing protection device’s actual performance was reduced adjusted with person’s audiometry. After training intervention, the estimate was done again and was compared with the adjusted audiometry.
According to ISO 1999 standard estimation results, the percent reduction of the workers hearing loss level was 6.48 dB in intervention group. This level remained unchanged in control group. The mean score of hearing threshold estimation (standard ISO 1999) was statistically more significant than mean score of hearing threshold (p-value ¡ 0.001). The results show not significant change in control group due to lack of changing of noise exposure level.
In regards to the results of hearing threshold estimation based on ISO 1999 and comparing with workers audiometry, it can be seen that BASNEF training intervention increases the duration of using the HPDs and it could be effective in reducing hearing threshold related to noise.