Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 38
items per page: 25 50 75
Sort by:
Download PDF Download RIS Download Bibtex

Abstract

The results presented in this article are part of the research on fatigue life of various foundry alloys carried out in recent years in the Lukasiewicz Research Network – Institute of Precision Mechanics and AGH University of Science and Technology, Faculty of Foundry Engineering. The article discusses the test results obtained for the EN-GJS-600-3 cast iron in an original modified low-cycle fatigue test (MLCF), which seems to be a beneficial research tool allowing its users to evaluate the mechanical properties of materials with microstructural heterogeneities under both static and dynamic loads. For a comprehensive analysis of the mechanical behaviour with a focus on fatigue life of alloys, an original modified low cycle fatigue method (MLCF) adapted to the actually available test machine was used. The results of metallographic examinations carried out by light microscopy were also presented. From the analysis of the results of the conducted mechanical tests and structural examinations it follows that the MLCF method is fully applicable in a quick and economically justified assessment of the quality of ductile iron after normalizing treatment.

Go to article

Authors and Affiliations

M. Maj
K. Pietrzak
A. Klasik
Download PDF Download RIS Download Bibtex

Abstract

Regions with warm climate are poor in organic matter or have a deficit of soil. The purpose of the work was to select the optimal mix from biodegradable wastes such as cardboard (Cb), natural textiles (Tx) newspaper (Np), colored newspaper (Cp), and office paper (Op) for creating artificial soil by combining these materials with compost and sand. To select the optimum mix, 15 samples were taken (3 from each type of waste in the following proportions: 25%, 50% and 75% ). The optimum mix was analyzed for grass germination rate and root development. Tests were performed in the laboratory with conditions similar to those of regions with warm climate and soil deficiency in a specially designed testing spot (bioterm). The effects of particular mixes on plant germination rate and growth were measured. Out of all mixes, the textile compositions Tx50 and Tx25 supported best the plant propagation. During the whole experimental process, the grass showed various growth tendencies. The best results for grass height were observed for mixes with textiles and colored newspaper. Based on this data and subsequent laboratory research, the best substrate composition was selected. For the whole period of the tests, germination rate in the pot with the mix was higher than the germination rate in the control sample with compost. Considering the experimental conditions of this research, the tested substrates can be used to aid in plant propagation, especially in regions with warm climate and soil deficiencies, and for restoration of damaged land areas.
Go to article

Bibliography

  1. Achiba, W., Gabteni, N., Lakhdar, A., Laing, G.D., Verloo, M., Jedidi, N. & Gallali, T. (2009). Effects of 5-year application of municipal solid waste compost on the distribution and mobility of heavy metals in a Tunisian calcareous soil. Agriculture, Ecosystems and Environment. 130, pp. 156-163. DOI:10.1016/j.agee.2009.01.001
  2. Alam, A., Nawaz Chaudhry, M.N., Ahmad, S.R., Batool, A., Mahmood, A. & Al-Ghamdi, H. (2021). Application of EASEWASTE model for assessing environmental impacts from solid waste landfilling. Archives of Environmental Protection. 47, No 4, pp. 84-92. DOI:10.24425/aep.2021.139504
  3. Asdrubali, F., Pisello, A.L. , Alessandro, F.D., Bianchi, F., Cornicchia, M. & Fabiani, C. (2015). Innovative Cardboard Based Panels with Recycled Materials from the Packaging Industry: Thermal and Acoustic Performance Analysis. Energy Procedia. 78, pp. 321-326. DOI:10.1016/j.egypro.2015.11.652
  4. Aspiras, F.F. & Manalo, J.R.I. (1995). Utilization of textile waste cuttings as building material. Journal of Materials Processing Technology. 48, pp. 379-384. DOI:10.1016/0924-0136(94)01672-N
  5. Awwad, E., Mabsout, M., Hamad, B., Farran, M. T. & Khatib, H. (2012). Studies on fiber-reinforced concrete using industrial hemp fibers. Construction and Building Materials. 35, pp. 710-717. DOI:10.1016/j.conbuildmat.2012.04.119
  6. Avató, J.L. & Mannheim, V. (2022). Life Cycle Assessment Model of a Catering Product: Comparing Environmental Impacts for Different End-of-Life Scenarios. Energies 15 (15): 5423. DOI:10.3390/en15155423
  7. Ayrilmis, N., Candan, Z. & Hiziroglu, S. (2008). Physical and mechanical properties of cardboard panels made from used beverage carton with veneer overlay. Materials & Design. 29, pp. 1897-1903. DOI:10.1016/j.matdes.2008.04.030.
  8. Bustamante, M.A., Said-Pullicino, D., Agullóa, E., Andreua, J., Paredesa, C. & Morala, R. (2011). Application of winery and distillery waste composts to a Jumilla (SE Spain) vineyard: Effects on the characteristics of a calcareous sandy-loam soil. Agriculture, Ecosystems and Environment. 140, pp. 80-87. DOI:10.1016/j.agee.2010.11.014
  9. Çay, A, Yanık, J, Akduman, Ç, Duman, G. & Ertaş, H. (2020). Application of textile waste derived biochars onto cotton fabric for improved performance and functional properties. Journal of Cleaner Production. 251, Article no. 119664. DOI:10.1016/j.jclepro.2019.119664
  10. Espinosa, E., Rol, F., Bras, J. & Rodríguez, A. (2019). Production of lignocellulose nanofibers from wheat straw by different fibrillation methods. Comparison of its viability in cardboard recycling process. Journal of Cleaner Production. 239, Article no. 118083. DOI:10.1016/j.jclepro.2019.118083
  11. Directive (EU) 2018/851 of the European Parliament and of the Council of 30 May 2018 amending Directive 2008/98/EC on waste.
  12. Hargreaves, J.C., Adl, M.S. & Warman, P.R.(2008). A review of the use of composted municipal solid waste in agriculture. Agriculture, Ecosystems and Environment. 123, pp. 1-14. DOI:10.1016/j.agee.2007.07.004
  13. Haslinger, S., Hummel, M., Anghelescu-Hakala, A., Määttänen, M. & Sixta, H. (2019). Upcycling of cotton polyester blended textile waste to new man-made cellulose fibers. Waste Management. 97, pp. 88-96. DOI:10.1016/j.wasman.2019.07.040
  14. Homem, N.C. & Pessoa Amorim M.T. (2020). Synthesis of cellulose acetate using as raw material textile wastes. Materials Today: Proceedings. 31, pp. S315-S317. DOI:10.1016/j.matpr.2020.01.494
  15. Kymäläinen, H.R. & Sjöberg, A.M. (2008). Flax and hemp fibres as raw materials for thermal insulations. Building and Environment. 43, pp. 1261-1269. DOI:10.1016/j.buildenv.2007.03.006
  16. Lederer, J., Karungi, J. & Ogwang, F. (2015). The potential of wastes to improve nutrient levels in agricultural soils: A material flow analysis case study from Busia District, Uganda. Agriculture, Ecosystems and Environment. 207, pp. 26-39. DOI:10.1016/j.agee.2015.03.024
  17. Lei, W., Zhou, X., Fang, C., Yonghu,Song, Y.L., Wang, C. & Huang, Z. (2019). New approach to recycle office waste paper: Reinforcement for polyurethane with nano cellulose crystals extracted from waste paper. Waste Management. 95, pp. 59-69. DOI:10.1016/j.wasman.2019.06.003
  18. Mannheim V (2022). Perspective: Comparison of end-of-life scenarios of municipal solid waste from viewpoint of life cycle assessment. Frontiers in Built Environment. 8:991589. DOI: 10.3389/fbuil.2022.991589
  19. Ordinance of the Minister of Agriculture and Rural Development on the realization of some regulations on the manures and fertilisation. Journal of Laws. no 119, item 765, June 18, 2008 (in Polish)
  20. Ordinance of the Minister of Environment on the conditions for the introduction of waste to waters or soil and substances particularly hazardous for the water environment, Journal of Acts 2014, item 1800, December 16 (in Polish)
  21. Ordinance of the Minister of Environment on the evaluation of contamination of the Earth’s surface. Journal of Laws dated 2016 item 1395, September 1, 2016 (in polish)
  22. Pelegrini, M., Gohr Pinheiro, I. & Valle, J. A. B. (2010). Plates made with solid waste from the recycled paper industry. Waste Management. 30, pp. 268-273. DOI:10.1016/j.wasman.2009.08.008
  23. Rajput, D., Bhagade, S. S., Raut, S. P., Ralegaonkar, R. V. & Sachin Mandavgane, A. (2012). Reuse of cotton and recycle paper mill waste as building material. Construction and Building Materials. 34, pp. 470-475. DOI:10.1016/j.conbuildmat.2012.02.035
  24. Si, Y. & Guo, Z. (2016). Eco-friendly functionalized superhydrophobic recycled paper with enhanced flame-retardancy. Journal of Colloid and Interface Science. 477, pp. 74-82. DOI:10.1016/j.jcis.2016.05.044
  25. Singh, A. & Raj, P. (2018). Segregation of waste at source reduces the environmental hazards of municipal solid waste in Patna, India. Archives of Environmental Protection. 44, No 4, pp. 96-110. DOI 10.24425/aep.2018.122306
  26. Tatariants, S.Y.M., Tichonovas, M., Sarwar, Z., Jonuškienė, I. & Kliucininkas, L. (2019). A new strategy for using textile waste as a sustainable source of recovered cotton. Resources, Conservation and Recycling.145, pp. 359-369. DOI:10.1016/j.resconrec.2019.02.031
  27. Zhou X.Y., Zheng, F., Li, H. & Lu C.L. (2010). An environment-friendly thermal insulation material from cotton stalk fibers. Energy and Buildings. 42, pp. 1070-1074. DOI:10.1016/j.enbuild.2010.01.020
Go to article

Authors and Affiliations

Mohamed Alwaeli
1
Mohammad Alshawaf
2
Marta Klasik
3

  1. Silesian University of Technology, Gliwice, Poland
  2. College of Life Sciences, Kuwait University, Kuwait
  3. free scientist
Download PDF Download RIS Download Bibtex

Abstract

The presented paper encompasses four threads of deliberation that show the essence, cognitive value and utility of the concept of creative cities in the shaping of the future of contemporary cities. These threads are: creative development, a model of a creative city, preconditions of a creative city, and the use of a creative city as a vehicle of development.

Go to article

Authors and Affiliations

Andrzej Klasik

Authors and Affiliations

Andrzej Klasik
Florian Kuźnik
Download PDF Download RIS Download Bibtex

Abstract

The article presents a structured approach to the attractiveness and competitiveness of Polish regions in the context of selected international experiences.

Go to article

Authors and Affiliations

Andrzej Klasik
Krzysztof Wrana

Authors and Affiliations

Andrzej Klasik
Florian Kuźnik
Download PDF Download RIS Download Bibtex

Abstract

The article aims at presenting the philosophy and model of the development vehicle to be understood as a new concept and tool to investigate and program local and regional development processes. The practical issues covered by the article include the identification and discovery of development vehicles, the elements of which can be observed in Polish metropolitan areas and agglomerations.

Go to article

Authors and Affiliations

Andrzej Klasik
Florian Kuźnik
Download PDF Download RIS Download Bibtex

Abstract

The article contains new approach to creating future of cities and urban regions based on the concept of creative cities. The core of this approach is to treat the genetic code of development as a tool for creating future of the territorial units. The combination and synergy of development genes that were considered as creativity, innovativeness and entrepreneurship allows the use of the fundamental elements of strategic analysis. On one hand, these elements are future challenges of cities and urban regions that they face in the perspective of global trends; on the other hand, they are strategic capabilities of sectors inseparably linked with creativity – sectors of culture, science and business, the integration of which is based on cultural heritage of cities and urban regions. The next issue of the article is the description of the way genes of urban development are manifested in the four sectors. It allows to present the genetic code of development function as a generator of strategic capabilities of creative sectors in cities and urban regions. Finally, the ideas of cross-sectoral undertakings for Polish big cities and urban agglomerations that enable facing intellectual and strategic global challenges were presented. This takes place through the use of strategic capabilities based on the genes of creativity, innovativeness and entrepreneurship; in this way, the genetic code of the development of large cities and urban agglomerations served as the new prospective approach to creating their future.

Go to article

Authors and Affiliations

Andrzej Klasik
Krzysztof Wrana

Authors and Affiliations

Florian Kuźnik
Andrzej Klasik

Authors and Affiliations

Andrzej Klasik
Tadeusz Kudłacz

Authors and Affiliations

Florian Kuźnik
Andrzej Klasik

This page uses 'cookies'. Learn more