The paper analyzes the monthly day equivalent levels, Lday (06–22 h) and night equivalent levels, Lnight (22–06 h) values observed in year 2015 and 2016 for the 70 locations whereby continuous noise monitoring is conducted under the National Ambient Noise Monitoring Network (NANMN). The study exclusively analyzes the ambient noise data acquired for 25 locations in commercial zone, 12 in industrial, 16 in residential and 17 in silence zones. The analysis of (Lday–Lnight) for 70 locations under observations reveals that 10 dB night time adjustment in day-night average sound level descriptor is not appropriate in such a scenario and as such it is recommended to use day-night average sound level and day-eveningnight average sound level descriptors without any 10 dB night time adjustment or 5 dB evening time adjustments. The analysis and conclusions of the present study shall be very useful for developing single value noise descriptor correlating the noise annoyance and health effects in Indian perspectives.

The paper presents a retrospective study for selection of noise barrier for road traffic noise abatement. The work proposes the application of Fuzzy TOPSIS (Technique for order preference by similarity to an ideal solution) approach is selection of optimal road traffic noise barrier. The present work utilizes the fuzzy TOPSIS model proposed by Mahdavi et al. (2008) in determination of ranking order of various types of noise barriers with respect to the various criteria considered. It is suggested that application of this approach can be very helpful in selection and application of optimal noise barrier for road traffic noise abatement.

The paper presents application of Taguchi method in optimizing the sound transmission loss through sandwich gypsum constructions and those comprising of masonry concrete blocks and gypsum boards in order to investigate the relative influence of the various parameters affecting the sound transmission loss. The application of Taguchi method for optimizing sound transmission loss has been rarely reported. The present work uses the results analytically predicted on “Insul” software for various sandwich material configurations as desired by each experimental run in an L8 orthogonal array. The relative importance of the parameters on single-number rating, Rw (C, Ctr) is evaluated in terms of percentage contribution using Analysis of Variance (ANOVA). The ANOVA method reveals that type of studs, steel stud frame and number of gypsum layers attached are the key factors controlling the sound transmission loss characteristics of sandwich multi-layered constructions.

The paper presents an extensive review investigating the practical aspects related to the use of single- number ratings used in describing the sound insulation performance of partition wall panels and practical complications encountered in precise measurements in extensive frequency range from 50 Hz to 5 kHz. SWOT analysis of various single number ratings is described. A laboratory investigation on a double wall partition panel combination revealed the significant dependence of STC rating on transmission loss at 125 Hz attributed to 8 dB rule. An investigation conducted on devising alternative spectrums of aircraft noise, traffic noise, vehicular horn noise and elevated metro train noise as an extension to ISO 717-1 Ctr for ascertaining the sound insulation properties of materials exclusively towards these noise sources revealed that the single-number rating Rw + Ctr calculated using ISO 717-1 Ctr gives the minimum sound insulation, when compared with Rw + Cx calculated using the alternative spectrums of aircraft noise, traffic noise, etc., which means that material provides a higher sound insulation to the other noise sources. It is also observed that spectrum adaptation term Cx calculated using the spectrum of noise sources having high sound pressure levels in lower frequencies decreases as compared to ISO 717-1 Ctr owing to significant dependence of Ctr at lower frequencies.

This paper describes the long-term noise monitoring data for ten consecutive years (2011–2020) acquired from the diversified National Ambient Noise Monitoring Network (NANMN) set up across 7 major cities of India and consisting of 70 stations for continuous noise monitoring throughout the year. The annual average ambient noise levels observed throughout these ten years in 70 locations under study, including 25 locations in commercial zones, 12 in industrial, 16 in residential, and 17 in silence zones, are described. The noise scenario in these ten years is compared and analyzed. It is observed that no site in residential or silence zones meets the ambient noise limits for the past ten years. The study suggests guidelines for a policy framework for environmental noise management and control to regulate noise pollution in Indian cities.