By means of small wind turbines, it is possible to create distributed sources of electricity useful in areas with good wind conditions. Sometimes, however, it is possible to use small wind turbines also in areas characterized by lower average wind speeds during the year. At the small wind turbine design stage, various types of technical solutions to increase the speed of the wind stream, as well as to optimally orientate it, can be applied. The methods for increasing the efficiency of wind energy conversion into electricity in the case of a wind turbine include: the use of a diffuser shielding the turbine rotor and the optimization of blades mounted on the turbine rotor. In the paper, the influence of the diffuser and rotor blades geometry on the efficiency of an exemplary wind turbine for exploitation in the West Pomeranian Province is investigated. The analyses are performed for three types of the diffuser and for three types of rotor blades. Based on them, the most optimal shapes of the diffuser and blades are selected due to the efficiency of the wind turbine. For the turbine with the designed diffuser, calculations of the output power for the assumed different values of the average annual wind speed and the constant Betz power factor and the specified generator efficiency are made. In all the analyzed cases, the amount of energy that can be generated by the turbine during the year is also estimated. Important practical conclusions are formulated on the basis of these calculations. In the final part of the paper, a 3D model of the wind turbine with the diffuser and rotor blades chosen based on earlier analyses is presented. As a material for the diffuser and rotor blades, glass fiber type A is applied. By means of calculations using the finite element method, the limit displacement of the turbine structure under the influence of a hurricane wind are determined. Based on these calculations, the correctness of the modelled small wind turbine structure has been demonstrated.
Roger Scruton refers to Thomas Stearns Eliot in almost every one of his books, but despite the undoubtedly fundamental influence, which Eliot had exerted on the development of Scruton’s outlook, apart from a short article entitled Eliot and Conservatism, Scruton did not devote a separate work to Eliot’s thought. As I try to show this is due to the fact that Scruton was not so much a scholar of Eliot, as a continuator of his thought – not merely an expert on his philosophy and poetry, but an inheritor of his spiritual legacy. Both Eliot and Scruton belong to a current, which may rightly be called conservative philosophy of culture. In this paper I outline the conception of culture advanced by Eliot, and show how Scruton draws on this conception in his own spiritual development.
The safe environmental disposal of sulphide-rich copper/zine mine tailings is fast becoming a major economic factor in determining the profitability of mining operations. There have been new approaches and better technologies practised in the recent years which allow the mining industries to reduce and/or eliminate the environmental impacts of harmful mine tailings. One of these approaches is the use of high-density paste backfill (HDPB) which is consisting mainly of a mix of solid particles (with the cement) and water, containing between 70% and 85% by dry weight of solids. The increased use of HDPB has improved the reliability, and has reduced the cost of the preparation and transportation systems. This paper focuses on the potential environmental benefits of using the HDPB when tailings are acid generating, and also provides a case study conducted in an underground copper/zinc mine in northeast Turkey in order to illustrate these benefits.