Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 44
items per page: 25 50 75
Sort by:
Download PDF Download RIS Download Bibtex

Abstract

The problem of control of rod heating process by changing the temperature along the rod whose ends are thermally insulated is considered. It is assumed that, along with the classical boundary conditions, nonseparated multipoint intermediate conditions are also given. Using the method of separation of variables and methods of the theory of control of finite-dimensional systems with multipoint intermediate conditions, a constructive approach is proposed to build the sought function of temperature control action. A necessary and sufficient condition is obtained, which the function of the distribution of the rod temperature must satisfy, so that under any feasible initial, nonseparated intermediate, and final conditions, the problem is completely controllable. As an application of the proposed approach, control action with given nonseparated conditions on the values of the rod temperature distribution function at the two intermediate moments of time is constructed.
Go to article

Bibliography

[1] A.G. Butkovskii: Control Methods for Systems with Distributed Parameters. Nauka, 1975 (in Russian).
[2] A.G Butkovskii, S.A Malyi, and Yu.N. Andreev: Optimal Control of Metal Heating. Moscow, Metallurgy, 1972 (in Russian).
[3] A.I. Egorov: Optimal Control of Thermal and Diffusion Processes. Nauka, 1978 (in Russian).
[4] A.I. Egorov and L.N. Znamenskaya: Introduction to the Theory of Control of Systems with Distributed Parameters. Textbook, Saint Petersburg, LAN, 2017 (in Russian).
[5] E.Ya. Rapoport: Structural Modeling of Objects and Control Systems with Distributed Parameters. Higher School, 2003 (in Russian).
[6] A.N. Tikhonov and A.A. Samarskii: Equations of Mathematical Physics. Nauka, 1977 (in Russian).
[7] V.I. Ukhobotov and I.V. Izmest’ev: A control problem for a rod heating process with unknown temperature at the right end and unknown density of the heat source. Trudy Instituta Matematiki i Mekhaniki, UrO RAN, 25(1), (2019), 297–305 (in Russian), DOI: 10.21538/0134-4889-2019-25-1-297-305.
[8] V.I. Ukhobotov and I.V. Izmest’ev: The problem of controlling the process of heating the rod in the presence of disturbance and uncertainty. IFAC Papers OnLine, 51(32), (2018), 739–742, DOI: 10.1016/j.ifacol.2018.11.458.
[9] V.I. Butyrin and L.A. Fylshtynskyi: Optimal control of the temperature field in the rod when changing the control zone programmatically. Applied Mechanics, 12(84), (1976), 115–118 (in Russian).
[10] M.M. Kopets: Optimal control over the process of heating of a thin core. Reports of the National Academy of Sciences of Ukraine, 7, (2014), 48–52 (in Ukrainian), http://dspace.nbuv.gov.ua/handle/123456789/87951.
[11] N.V.Gybkina, D.Yu. Podusov, and M.V. Sidorov: The optimal control of a homogeneous rod final temperature state. Radioelectronics and Informatics, 2 (2014), 9–15 (in Russian).
[12] E.Y. Vedernikova and A.A. Kornev: To the problem of rod heating. Moscow Univ. Math. Bull., 69, (2014), 237–241, DOI: 10.3103/S0027132214060023.
[13] J.F. Bonnans and P. Jaisson: Optimal control of a parabolic equation with time-dependent state constraints. SIAM Journal on Control and Optimization, 48(7), (2010), 4550–4571.
[14] A. Lapin and E. Laitinen: Iterative solution of mesh constrained optimal control problems with two-level mesh approximations of parabolic state equation. Journal of Applied Mathematics and Physics, 6, (2018), 58–68, DOI: 10.4236/jamp.2018.61007.
[15] K. Kunisch and L. Wang: Time optimal control of the heat equation with pointwise control constraints. ESAIM: Control, Optimisation and Calculus of Variations, 19(2), (2013), 460–485, http://eudml.org/doc/272753.
[16] J.M. Lemos, L. Marreiro, and B. Costa: Supervised multiple model adaptive control of a heating fan. Archives of Control Sciences, 18(1), (2008), 5–16.
[17] S.H. Jilavyan, E.R. Grigoryan, and A.Zh. Khurshudyan: Heating control of a finite rod with a mobile source. Archives of Control Sciences, 31(2), (2021), 417–430, DOI: 10.24425/acs.2021.137425.
[18] V.R. Barseghyan: Control problem of string vibrations with inseparable multipoint conditions at intermediate points in time. Mechanics of Solids, 54(8), (2019), 1216–1226. DOI: 10.3103/S0025654419080120.
[19] V.R. Barseghyan: Optimal control of string vibrations with nonseparate state function conditions at given intermediate instants. Automation and Remote Control, 81(2), (2020), 226–235, DOI: 10.1134/S0005117920020034.
[20] V.R. Barseghyan: Control of Compound Dynamic Systems and of Systems with Multipoint Intermediate Conditions. Nauka, 2016 (in Russian).
[21] V.R. Barseghyan and T.V. Barseghyan: On an approach to the problems of control of dynamic system with nonseparated multipoint intermediate conditions. Automation and Remote Control, 76(4), (2015), 549–559, DOI: 10.1134/S0005117915040013.
Go to article

Authors and Affiliations

Vanya R. Barseghyan
1

  1. Institute of Mechanics of the National Academyof Sciences of Armenia, Yerevan State University, Armenia
Download PDF Download RIS Download Bibtex

Abstract

The diversity of wave modes in the magnetic gas gives rise to a wide variety of nonlinear phenomena associated with these modes. We focus on the planar fast and slow magnetosound waves in the geometry of a flow where the wave vector forms an arbitrary angle θ with the equilibrium straight magnetic field. Nonlinear distortions of a modulated signal in the magnetic gas are considered and compared to that in unmagnetised gas. The case of acoustical activity of a plasma is included into consideration. The resonant three-wave non-collinear interactions are also discussed. The results depend on the degree of non-adiabaticity of a flow, θ, and plasma-β.

Go to article

Authors and Affiliations

Anna Perelomova

Authors and Affiliations

Mehmet Demir Kaya
1
ORCID: ORCID
Nurgül Ergin
2

  1. Department of Field Crops, Faculty of Agriculture, Eskişehir Osmangazi University, Eskişehir, Turkey
  2. Department of Field Crops, Faculty of Agriculture and Natural Sciences, Bilecik Şeyh Edebali University, Bilecik, Turkey
Download PDF Download RIS Download Bibtex

Abstract

As the capacity and scale of distribution networks continue to expand, and distributed generation technology is increasingly mature, the traditional fault location is no longer applicable to an active distribution network and "two-way" power flow structure. In this paper, a fault location method based on Karrenbauer transform and support vector machine regression (SVR) is proposed. Firstly, according to the influence of Karrenbauer transformation on phase angle difference before and after section fault in a low-voltage active distribution network, the fault regions and types are inferred preliminarily. Then, in the feature extraction stage, combined with the characteristics of distribution network fault mechanism, the fault feature sample set is established by using the phase angle difference of the Karrenbauer current. Finally, the fault category prediction model based on SVR was established to solve the problem of a single-phase mode transformation modulus and the indistinct identification of two-phase short circuits, then more accurate fault segments and categories were obtained. The proposed fault location method is simulated and verified by building a distribution network system model. The results show that compared with other methods in the field of fault detection, the fault location accuracy of the proposed method can reach 98.56%, which can enhance the robustness of rapid fault location.
Go to article

Authors and Affiliations

Siming Wang
1
Zhao Kaikai
1

  1. School of Automation and Electrical Engineering, Lanzhou Jiaotong University, China
Download PDF Download RIS Download Bibtex

Abstract

This paper presents a review of the electromagnetic field and a performance analysis of a radial flux interior permanent magnet (IPM) machine designed to achieve 80 kW and 125 Nmfor an electric and hybrid traction vehicle. The motor consists of a 12-slot stator with a three-phase concentrated winding as well as an 8-pole rotor with V-shaped magnets. Selected motor parameters obtained from an IPM prototype were compared with the design requirements. Based on the electromagnetic field analysis, the authors have indicated the parts of the motor that should be redesigned, including the structure of the rotor core, aimed at enhancing the motor’s performance and adjusting segmentation for magnet eddy current loss reduction. In addition, iron and PM eddy current losses were investigated. Moreover, transient analysis of current peak value showed that the current may increase significantly compared to steady-state values.Amap of transient peak current load vs. torque load plotted against rotor speed was provided. Based on the numeric and analytical results of physical machine parameters, the authors indicate that collapse load during the motor’s operation may significantly increase the risk of permanent magnet (PM) demagnetization. It was also found that collapse load increases the transient torque, which may reduce the lifetime of windings.

Go to article

Authors and Affiliations

Adrian Młot
ORCID: ORCID
Marcin Kowol
Janusz Kołodziej
Andrzej Lechowicz
Piotr Skrobotowicz
Download PDF Download RIS Download Bibtex

Abstract

Nowadays, information security management systems are important parts of managing a system for better handling of the information security. In scenarios and situations where safety management is done by managing protection of malwares, it is important to manage security issues properly. Cryptography is an approach which makes possible for a recipient to encrypt and decrypt the information. A combination of two different strategies for encryption and decryption in the text encoding will be transformed into the used all content. The encryption and decryption key of the content decryption key is used. There are different types of information. A number, such as finding two large prime numbers with that product. The number, the size of the RSA key is large enough to make, it's hard to pinpoint these numbers. The key, known as the RSA public key, is the most prominent open encryption. Calculations were used for information exchange. In this paper, we created a program for simulation and testing of apply cryptography of Advance Encryption Standard (AES) algorithm with Rivest-Shamir-Adleman (RSA) algorithm for better performance. In this study, this program is an application of a new algorithm to be the AES&RSA principle of using a public key instead of a private key for cryptography, and the testing of encryption and decryption for the AES&RSA algorithm resulted in time is no different on the AES algorithm and more secure encryption and decryption. The results indicated that the time needed for encoding and decoding of AES&RSA algorithm has been reduced (i.e., efficiency has been improved).
Go to article

Authors and Affiliations

Santi Pattanavichai
1

  1. Rajamangala University of Technology Thanyaburi, Information Technology Department, Thailand
Download PDF Download RIS Download Bibtex

Abstract

Signal attenuation caused by the propagation path between the compromising emanation source (the location of secured IT equipment) and the location of the antenna of the potential infiltrating system has a direct influence on the electromagnetic safety of IT equipment. The article presents original analytical relationships necessary to estimate the attenuation values introduced by the propagation path of the potential compromising emanation signal, which correspond to the most probable locations of IT equipment in relation to the location of the potential infiltrating system. The author of the article analyzes various location scenarios for IT equipment – a potential source of compromising emanations – with a potential infiltrating system located either within or outside the boundaries of a building, in which said IT equipment is located. The aforementioned scenarios are characterized by the lowest propagation path attenuation of potential compromising emanation generated by the secured IT equipment and provide for location masking of the potential infiltrating system. Example design of protective solutions for IT equipment elaborated by article author in the form of a shielding enclosure is presented in the article as well.

Go to article

Authors and Affiliations

Leszek Nowosielski
Download PDF Download RIS Download Bibtex

Abstract

Prolonged exposure to UV radiation, and ever-increasing life expectancy, mean that an increasing proportion of the population suffers from clouding of the intraocular lens. Nowadays, the performance of intraocular implantation procedures is commonplace. Unfortunately, with the increasing number of operations, the number of postoperative complications is also increasing. One way to avoid complications may be to use an intraocular implant that has been immersed in a solution containing silver nanoparticles. As part of the study, four selected intraocular implants – that are available on the ophthalmic market – were tested. In order to investigate the effect of silver particles on the optical properties of the implants, tests were carried out using a UV-VIS spectrophotometer. Two series of implants were tested: before and after immersion in a silver solution. The implants were immersed for a period of 7 days. It was found that the presence of silver particles does not have a negative impact on the translucency of the implants.
Go to article

Authors and Affiliations

K. Jeż
1
ORCID: ORCID
M. Gacek
1
ORCID: ORCID
M. Nabiałek
1
ORCID: ORCID
L. Toth
2
ORCID: ORCID
M. Pike-Biegunski
3

  1. Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology, Department of Physics, 19 Armii Krajowej Str., 42-200 Częstochowa, Poland
  2. Óbuda University, Bánki Donát Faculty of Mechanical and Safety Engineering, Material Science Department, 1081, Népszínház 8, Budapest, Hungary
  3. Nano Koloid sp. z o. o, Hoża 62/37, 00-682 Warszawa, Poland
Download PDF Download RIS Download Bibtex

Abstract

This paper presents a novel measurement method and briefly discusses the basic properties of direction of arrival (DoA) measurement in a multiple-input multiple-output (MIMO) radar system by using orthogonality with time-division multiplexing (TDM), where only one transmitting antenna element is active in each time slot. This paper presents the mathematical model of the TDM-MIMO radar operating at 10 GHz, transmitting a string of pulses, the method of transmitting and receiving the signal, and the method of measuring the angle of arrival of the signal based on the use of the Capon algorithm and its modifications. Finally, the correctness of the theory, algorithm and method of measuring the direction of arrival of the signal is verified by experimental simulation. The work discussed in this paper is of great significance to practically demonstrate the capabilities of the TDM MIMO radar sensor in practical implementations like reconnaissance and electronic warfare systems.
Go to article

Authors and Affiliations

Anna Ślesicka
1
Adam Kawalec
2
Błażej Ślesicki
3

  1. Military University of Aviation, Institute of Navigation, Dywizjonu 303 no. 35, 08-521 Deblin, Poland
  2. Military University of Technology, Faculty of Mechatronics, Armament and Aerospace, Department of Anti-AircraftMissile Sets, gen. S. Kaliskiego 2, 00-908 Warsaw, Poland
  3. Military University of Aviation, Faculty of Aviation, Department of Avionics and Control Systems,Dywizjonu 303 no. 35, 08-521 Deblin, Poland
Download PDF Download RIS Download Bibtex

Abstract

The manufacturing and characterization of polymer nanocomposites is an active research trend nowadays. Nonetheless, statistical studies of polymer nanocomposites are not an easy task since they require several factors to consider, such as: large amount of samples manufactured from a standardized procedure and specialized equipment to address characterization tests in a repeatable fashion. In this manuscript, the experimental characterization of sensitivity, hysteresis error and drift error was carried out at multiple input voltages (����) for the following commercial brands of FSRs ( force sensing resistors): Interlink FSR402 and Peratech SP200-10 sensors. The quotient between the mean and the standard deviation was used to determine dispersion in the aforementioned metrics. It was found that a low mean value in an error metric is typically accompanied by a comparatively larger dispersion, and similarly, a large mean value for a given metric resulted in lower dispersion; this observation was held for both sensor brands under the entire range of input voltages. In regard to sensitivity, both sensors showed similar dispersion in sensitivity for the whole range of input voltages. Sensors’ characterization was carried out in a tailored test bench capable of handling up to 16 sensors simultaneously; this let us speed up the characterization process.
Go to article

Authors and Affiliations

Carlos Andrés Palacio Gómez
1
Leonel Paredes-Madrid
2
Andrés Orlando Garzon
2

  1. GIFAM Group, Universidad Antonio Nariño, Cra 7 No. 21-84, 150001 Tunja, Boyacá, Colombia
  2. Universidad Católica de Colombia, Faculty of Engineering, Carrera 13 # 47-30, Bogota, Colombia
Download PDF Download RIS Download Bibtex

Abstract

This study was conducted with the aim of determining the growth characteristics and survival rate of Karacabey Merino lambs, as well as the non-genetic factors affecting these traits. The study included data from a total of 17659 lambs and 12263 ewes raised in 30 herds between the years 2011 and 2016 as part of the National Sheep and Goat Improvement Project. The average birth weight of the lambs was determined as 3.73±0.05 kg, the average 45th day live weight was 18.43±0.58 kg, the average weaning (average 91.8 days) weight was 31.83±0.24 kg, and the average daily live weight gain until weaning was 289.1±3.91 g. The average survival rate of lambs at weaning was calculated to be 95.67% ± 1.15. The effects of the factors herd, birth year, birth type, birth season and sex were found significant for all traits (p<0.01). It was established that the mortality rate in lambs in large herds was higher during 6 years in which the project was carried out. Due to the high twinning rate in large herds, the number of lambs per worker is increased, and as a result, they cannot be adequately cared for. For this reason, large farms may be encouraged to increase workmanship services in addition to being provided with protective health practices for lambs throughout the birth period. On the other hand, it was determined that the twinning rate was low in small farms. On farms with fewer sheep populations, it may be advised to flush or administer exogenous hormone treatments to ewes in order to increase fertility and help them bear twins.
Go to article

Bibliography

  1. Abdoli R, Zamani P, Mirhoseini SZ, Ghavi Hossein-Zahed N, Nadri S (2016) A review on prolificacy in sheep. Reprod Domest Anim 51: 631-637.
  2. Akpa GN, Ambali AL, Suleiman IO (2013) Body conformation, testicular and semen characteristics as influenced by age, hair type and body condition of Red Sokoto goat. NY Sci J 6: 44-58.
  3. Albial AM, Singh J, Singh DP, Niwas R (2014) Environmental influences on growth traits of Nali sheep. Indian J Anim Res 48: 75-77.
  4. Balasubramanyam D, Jaishankar S, Sivaselvam SN (2010) Performance of Madras Red sheep under farmer’s flock. Indian J Small Rumin 16: 217-220.
  5. Baneh H, Hafezian SH (2009) Effects of environmental factors on growth traits in Ghezel sheep. Afr J Biotechnol 8: 2903-2907.
  6. Baş S, Özsoy MK, Vanlı Y (1986) The effects of feeding at different durations pre ram-mating on fertility in sheep, growth and survival rate. Turk Vet Anim Sci 10: 221-234.
  7. Bela B, Haile A (2009) Factors affecting growth performance of sheep under village management conditions in the south western part of Ethiopia. Livest Res Rural Dev 21: 189.
  8. Brien FD, Hebart ML, Jaensch KS, Smith DH, Grimson RJ (2009) Genetics of lamb survival: A study of Merino resource flocks in South Australia. Proc Assoc Advmt Anim Breed Genet 18: 492-495.
  9. Cloete SW, Cloete JJ (2015) Production performance of Merino and Dohne Merino ewes and lambs in pure or crossbreeding systems. Proc Assoc Advmt Anim Breed Genet 21: 217-220.
  10. Dangi PS, Poonia JS (2006) Factors affecting weaning and six month body weight in crossbred sheep. Indian J Anim Res 40: 161-163.
  11. Devendran P, Cauveri D, Murali N, Kumarasamy P (2014) Growth profile of Madras Red sheep in farmer’s flock. Indian J Small Rumin 20: 20-23.
  12. Dixit SP, Singh G, Dhillon JS (2011) Genetic and environmental factors affecting fleece traits in Bharat Merino sheep. Indian J Anim Sci 81: 80-83.
  13. Gowane GR, Chopra A, Prince LL, Mishra AK, Arora AL (2011) Genetic analysis for growth traits of prolific Garole × Malpura (GM) sheep. Trop Anim Health Prod 43: 299-303.
  14. Güngör İ, Akçapınar H (2013) The production traits of Bafra sheep reared in Ankara conditions. Lalahan Hay Araşt Enst Derg 53: 59-73.
  15. Hatcher S, Atkins KD, Safari E (2010) Lamb survival in Australian Merino Sheep: A genetic analysis. J Anim Sci 88: 3198-3205.
  16. Iman NY, Slyter AL (1996) Lifetime lamb and wool production of targhee or Finn-Dorset-Targhee ewes managed as farm place or range flock: II. Cumulative lamb and wool production. J Anim Sci 74: 1765-1769.
  17. Kaymakçı M (2016) Advanced sheep breeding, 1-9; Meta Press, Izmir, Türkiye, ISBN 978-605-85998.
  18. Lalit, Malik ZS, Dalal DS, Dahiya S, Magotra A, Patil CS (2016) Genetics of growth traits in sheep: A review. IJRRLS 3: 12-18.
  19. Lupi TM, Nogales S, León JM, Barba C, Delgado JV (2015) Analysis of the non-genetic factors affecting the growth of Segureño sheep. Ital J Anim Sci 14: 124-131.
  20. Mane PM, Pachpute ST, Nimase RG (2014) Growth and reproductive performance of Deccani sheep in an organized farm. Indian J Small Rumin 20: 23-27.
  21. Minitab 2019. Minitab® 19 Statistical Software. https://www.minitab.com/en-us/
  22. Mishra AK, Arora AL, Prince LL, Kumar S (2008) Performance evaluation of Garole×Malpura half-bred sheep evolved in semiarid region of Rajasthan. Indian J Anim Sci 78: 746-750.
  23. Momoh OM, Rotimi EA, Dim NI (2013) Breed effect and non-genetic factors affecting growth performance of sheep in semi-arid region of Nigeria. J Appl Biosci 67: 5302-5307.
  24. Morris CA, Hickey SM, Clarke JN (2000) Genetic and environmental factors affecting lamb survival at birth and through to weaning. New Zealand J Agric Res 43: 515-524.
  25. Mourad M, Gbanamou G, Balde IB (2000) Performance of West African dwarf goats under the extensive system of production in Faranah, Guinea. In: Proceedings of the 7th International conference on goats, 15-21 May, France, pp. 227-230.
  26. Mousa-Balabel TM (2010) The relationship between sheep management and lamb mortality. WASET 4: 372-377.
  27. Nirban LK, Joshi RK, Narula HK, Singh H, Bhakar S (2015) Genetic and non-genetic factors affecting body weights in Marwari sheep. Indian J Small Rumin 21: 106-108.
  28. Parihar K, Yadav SB, Narula HK, Pannu U, Bais B (2016) Factors affecting in growth performance and greasy fleece yield in Magra sheep under arid condition of Rajasthan. Int J Agric Sci 9: 4095-4096.
  29. Petrovic MP, Muslic DR, Petrovic VC, Maksimovic N (2011) Influence of environmental factors on birth weight variability of indigenous Serbian breeds of sheep. Afr J Biotechnol 10: 4673-4676.
  30. Prakash V, Prince LL, Gowane GR, Arora AL (2012) Factors affecting post-weaning average daily gain and kleiber ratios in Malpura sheep. Indian J Anim Sci 82: 1598-1600.
  31. Rather MA, Bashir I, Ahanger SA (2020) Effect of genetic and non-genetic factors on birth weight of Corriedale sheep in an organized farm in Kashmir. Anim Sci Quarterly 1: 13-16.
  32. Sezenler T, Köycü E, Özder M (2008) The effect of body condition score in Karacabey Merino at lambing on the lamb growth. J Tekirdag Agric Fac 5: 45-53.
  33. Sezenler T, Soysal D, Yıldırır M, Yüksel MA, Ceyhan A, Yaman Y, Erdoğan İ, Karadağ O, (2013) Influence of some environmental factors on litter size and lamb growth performance in Karacabey Merino sheep. J Tekirdag Agric Fac 10: 40-47.
  34. Susic V, Pavic V, Mioc B, Stokovic I, Kabalin A E (2005) Seasonal variations in lamb birth weight and mortality. Vet Arhiv 5: 375-381.
  35. Tesema Z, Deribe B, Lakew M, Getachew T, Tilahun M, Belayneh N, Kefale A, Shibesh M, Zegeye A, Yizengaw L, Alebachew GW, Tiruneh S, Kiros S, Asfaw M, Bishaw M (2022) Genetic and non-genetic parameter estimates for growth traits and Kleiber ratios in Dorper × indigenous sheep. Animal 16(6): 100533.
  36. Thiruvenkadan AK, Karunanithi K, Muralidharan J, Babu RN (2011) Genetic analysis of pre-weaning and post-weaning growth traits of Mecheri sheep under dry land farming conditions. Asian-Aust J Anim Sci 24: 1041-1047.
  37. Ullah F, Javed K, Salim M, Rehman IU, Khan M, Ali S, Rehman ZU, Bhunesh Babar A, Hussain MA, Khan S, Rahim N, Hosseini SM (2020) Identification of non-genetic factors affecting birth weight, weaning weight, pre-weaning weight, yearling weight and greasy fleece performance of Kajli Sheep at two ecologies in Pakistan. Ann Agric Crop Sci 5: 1065.
  38. Ünal N, Akçapınar H, Atasoy F, Aytaç M (2006) Some reproductive and growth traits of crossbred genotypes produced by crossing local sheep breeds of Kivircik × White Karaman and Chios × White Karaman in steppe conditions. Arch Tierz 49: 55-63.
  39. Ürüşan H, Emsen H (2010) Effect of lambing season, lamb genotype, maternal and birth related factors on growth and viability of lambs. J Tekirdag Agric Fac 7: 163-172.
  40. Vivekanand Joshi RK, Narula HK, Singh H, Chopra A (2014) Effect of genetic and non-genetic factor on growth of Magra sheep in arid region of rajasthan. Indian J Small Rumin 20: 19-22.
Go to article

Authors and Affiliations

H. Hanoglu Oral
1
S. Ozis Altincekic
2
S. Duru
2

  1. Muş Alparslan University, Faculty of Applied Sciences, Department of Animal Production and Technologies, Mus, 49250, Türkiye
  2. Bursa Uludag University, Faculty of Agriculture, Department of Animal Science, 16059, Bursa, Türkiye
Download PDF Download RIS Download Bibtex

Abstract

Nontuberculous mycobacteria (NTM) have recently emerged as important bacterial pathogens of both animals and humans. In this study, we aimed to evaluate the effect of a combination of ten antibiotics with an inhibitor of efflux pumps (EPI), i.e. berberine (BER), against 6 strains of NTM. Our results showed that the BER potentiated the anti-mycobacterial activities of the antibiotics. Overall, our findings show the importance of BER in increasing the efficacy of antibiotics in NTM.
Go to article

Bibliography


Gaba S, Saini A, Singh G, Monga V (2021) An insight into the medicinal attributes of berberine derivatives: a review. Bioorg Med Chem 38: 116143.
Gentry EJ, Jampani HB, Keshavarz-Shokri A, Morton MD, Velde DV, Telikepalli H, Mitscher LA, Shawar R, Humble D, Baker W (1998) Antitubercular natural products: berberine from the roots of commercial hydrastis canadensis powder. Isolation of inactive 8-oxotetrahydrothalifendine, canadine, beta-hydrastine, and two new quinic acid esters, hycandinic acid esters-1 and -2. J Nat Prod 61: 1187-1193.
Guz L, Puk K (2022) Antibiotic susceptibility of mycobacteria isolated from ornamental fish. J Vet Res 66: 69-76.
Menichini M, Lari N, Rindi L (2020) Effect of efflux pump inhibitors on the susceptibility of Mycobacterium avium complex to clarithromycin. J Antibiot 73: 128-132.
Puk K, Guz L (2020) Occurrence of Mycobacterium spp. in ornamental fish. Ann Agric Environ Med 27: 535-539.
Song L, Wu X (2016) Development of efflux pump inhibitors in antituberculosis therapy. Int J Antimicrob Agents 47: 421-429.
Van Ingen J, Boeree MJ, Van Soolingen D, Mouton JW (2012) Resistance mechanisms and drug susceptibility testing of nontuberculous mycobacteria. Drug Resist Updat 15: 149-161.
Wang Y, Fu H, Li Y, Jiang J, Song D (2012) Synthesis and biological evaluation of 8-substituted berberine derivatives as novel an-ti-mycobacterial agents. Acta Pharm Sin B 2: 581-587.
Zhou XY, Ye XG, He LT, Zhang SR, Wang RL, Zhou J, He ZS (2016) In vitro characterization and inhibition of the interaction between ciprofloxacin and berberine against multidrug-resistant Klebsiella pneumoniae. J Antibiot 69: 741-746.
Go to article

Authors and Affiliations

K. Puk
1
L. Guz
1

  1. Department of Biology and Fish Diseases, Faculty of Veterinary Medicine, University of Life Sciences, Akademicka 12, 20-033 Lublin, Poland
Download PDF Download RIS Download Bibtex

Abstract

Bovine parvovirus (BPV), bovine coronavirus (BCoV) and bovine parainfluenza virus (BPIV) are common etiologies causing gastrointestinal and respiratory diseases in dairy herds. However, there are few reports on the synchronous detection of BPV, BCoV and BPIV. The present article aimed to develop a quick and accurate RT-PCR assay to synchronously detect BPV, BCoV and BPIV based on their specific probes. One pair universal primers, one pair specific primers and one specific probe was designed and synthesized. After the concentrations of primer and probe and annealing temperature were strictly optimized, the specificity, sensitivity and repeatability of the established triplex probe qRT-PCR were evaluated, respectively. The results showed the recombinant plasmids of pMD18-T-BPV, pMD18-T-BCoV and pMD18-T-BPIV were 554bp, 699bp and 704bp, respectively. The optimal annealing temperature was set at 45.0°C for triplex qRT-PCR. The triplex probe qRT-PCR can only synchronously detect BPV, BCoV and BPIV. Detection sensitivities were 2.0×102, 2.0×102 and 2.0×101 copies/μL for BPV, BCoV and BPIV, being 1000-fold greater than that in the conventional PCR. Detection of clinical samples demon- strated that triplex probe qRT-PCR had a higher sensitivity and specificity. The intra-assay and inter-assay coefficient of variation were lower than 2.0%. Clinical specimens verified that the triplex qRT-PCR had a higher sensitivity and specificity than universal PCR. In conclusion, this triplex probe qRT-PCR could detect only BPV, BCoV and BPIV. Minimum detection limits were 2.0×102 copies/μL for BPV and BCoV, and 2.0×101 copies/μL for BPIV. The sensitivity of this triplex probe qRT-PCR was 1000-fold greater than that in the conventional PCR. The newly qRT-PCR could be used to monitor or differentially diagnose virus infection.

Go to article

Authors and Affiliations

J. Geng
Y. Niu
L. Wei
Q. Li
Z. Gong
S. Wei
Download PDF Download RIS Download Bibtex

Abstract

Therefore, the aim of the present study was to evaluate the possible effect of bilberry fruit (Vaccinium myrtillus L.) supplement in a daily diet on the cognitive behaviour of the rats and the expression of paravalbumin (PV) in populations of hippocampal neurons. It has been postulated that the antioxidants present in bilberry fruit may act as neuroprotective factors playing also a significant role as memory enhancements. Forty Wistar rats with a similar average body weight (460 ± 0.4 g) were divided into four groups (n=10 per group). The control group received standard feed (210 g/week), whereas animals of experimental groups received standard feed supplemented with bilberry (per os) at consumed doses of 2 g (group I), 5 g (group II), and 10 g/kg b.w./ /day (group III). After three months of feeding with bilberry, the modified elevated plus-maze test (mEPM) was performed. After 32 weeks of feeding, brains were collected and PV-immunoreactive (ir) neurons were immunohistochemically visualized. In the modified elevated plus-maze test, transfer latency examined 2 h and 24 h after the acquisition session was significantly shorter (p<0.05) in the group II in comparison with the control group. In CA1 and CA2/CA3 hippocampal fields as well as dentate gyrus of all experimental groups, a significant (p<0.05) decrease in number of PV-ir neurons were found. In relation to the control group, the mean subpopulation of PV-ir neurons found in groups II and III were significantly reduced. The subpopulations of PV-ir neurons found in DG of all experimental groups were significantly reduced in comparison to the control. In conclusion the in the present paper we demonstrated a relationship between the diet rich in a bilberry fruit and process of memory as well as numbers of calcium- binding protein-expressing hippocampal neurons. Our results may be source of basic knowledge for further research aiming at neuroprotective role of the bilberry fruit.

Go to article

Authors and Affiliations

K. Borowiec
M. Matysek
D. Szwajgier
G. Biała
M. Kruk-Słomka
R. Szalak
J. Ziętek
M.B. Arciszewski
Z. Targoński
Download PDF Download RIS Download Bibtex

Abstract

The Oligocene (Rupelian) Byram Formation (Vicksburg Group) in Alabama, USA, is divided into three members, including (in ascending order) the Glendon Limestone, unnamed marl, and the Bucatunna Clay. The Oligocene marine units in Alabama have been historically under-investigated, but bulk samples recently obtained from Glendon Limestone Member exposures at site AWa-9 in Washington County yielded 20 unequivocal elasmobranch and teleost taxa. This surprisingly diverse paleofauna, based on isolated teeth, bones and otoliths, includes the new taxon, Gobiosoma? axsmithi sp. nov., as well as “Aetomylaeus” sp., Albula sp., Aplodinotus gemma Koken, 1888, Ariosoma nonsector Nolf and Stringer, 2003, Balistidae indet., Citharichthys sp., Myliobatoidei indet., Diretmus? sp., Hemipristis sp., Negaprion aff. N. gilmorei (Leriche, 1942), Pachyscyllium sp., Paralbula sp., Physogaleus sp., Preophidion meyeri (Koken, 1888), Sciaena pseudoradians (Dante and Frizzell in Frizzell and Dante, 1965), Sciaenops? sp., Sparus? elegantulus Koken, 1888, Sphyraena sp., and Syacium sp. Additional remains were recovered but could not be identified beyond undetermined Elasmobranchii or Teleostei. All these taxa represent first occurrences within the Glendon Limestone Member in Alabama, and the “Aetomylaeus” sp., Pachyscyllium sp., Paralbula sp., and Sciaenops? sp. specimens represent the first occurrences of each in the Oligocene of the Gulf Coastal Plain of the USA. We also report the first record of Oligocene Paralbula Blake, 1940 teeth, and the first occurrence of an Oligocene member of the Balistidae in the Western Hemisphere. This marine vertebrate assemblage indicates that the Glendon Limestone Member at site AWa-9 represented a subtropical to temperate, middle shelf paleoenvironment with a paleowater depth interpreted as 30–100 m.
Go to article

Authors and Affiliations

Jun A. Ebersole
1
David J. Cicimurri
2
Gary L. Stringer
3

  1. McWane Science Center, 200 19th Street North, Birmingham, AL 35203, USA
  2. South Carolina State Museum, 301 Gervais Street, Columbia, SC 29201, USA
  3. Museum of Natural History, 708 University Avenue, University of Louisiana at Monroe, Monroe, LA 71209, USA
Download PDF Download RIS Download Bibtex

Abstract

The paper includes experimental research using the Split Hopkinson Pressure Bar to determine dynamic compression curves and strength dynamic parameters to depend on the strain rate and moisture for silty sand soil samples. Those experiments are oedometric type based in a rigid confining cylinder. Samples of silty sand with fine a fraction content were taken for the study. To ensure sufficiently uniaxial strain of the tested material, the soil samples were placed in properly prepared casings made of duralumin for the needs of the tests. Thanks to the use of measuring strain gauges on the initiating and transmitting bars, as well as the casing, the nature of the loading pulse was obtained, which was then subjected to the process of filtration and data processing to obtain the nature of the incident, reflected and transmitted wave. During the above dynamic experiments with the representative of silty sand soils, it was observed that its dynamic compaction at a high strain rate is different than in the case of the Proctor test. This is due to higher compaction energy, which additionally changes the grain size by destroying the grains in the structure. The paper presents the results of particle size distribution analysis for two different types of soil samples - this type of analysis is unique. Hence experiments should be further continued for such soils with different granulations and various moisture using, for example, Hopkinson measuring bar technique to confirm for other silty sand soils that are often subgrade of various engineering objects.
Go to article

Authors and Affiliations

Ryszard Chmielewski
1
ORCID: ORCID
Leopold Kruszka
1
ORCID: ORCID
Ryszard Rekucki
1
Kamil Sobczyk
1

  1. Military University of Technology, Dept. of Military Engineering and Military Infrastructure, 2 Gen. Sylwester Kaliski Str., 00-908 Warsaw, Poland
Download PDF Download RIS Download Bibtex

Abstract

The article presents a results of study on the impact of replacing CEM I SR3/NA by CEMIII/A LH/HSR/NAon the mechanical properties and durability of pavement concrete with exposed aggregate. Was used granite aggregate and washed sand. Water/cement (w / c) ratio in the tested concretes constituted 0.35 and 0.4 and part of the cement was replaced with a 5% addition of natural pozzolana – zeolite. Compressive strength tests were performed after 3, 7, 28 and 56 days, tests of tensile strength test by splitting method and flexural strength two-point loading tests. The characteristics of the air pores and the rate of water absorption by concrete surface of the samples cut out from the slabs with exposed aggregate were presented. The resistance of the surface to exfoliation after 56 cycles of freezing-thawing in NaCl solution was tested. Based on the results obtained, it was found that when designing the composition of the concrete intended for the upper layer of the pavement, it is necessary to ensure high tensile strength, appropriate in the XF4 environment and with the decrease in the w / c < 0.4, a reduction in capillary porosity of the cement paste is obtained, and the same the durability of concrete is increased due to the improved strength parameters in the contact zone between coarse aggregate grains and cement paste. The research also showed a significant influence of proper cure on the mechanical properties and durability of pavement concrete.
Go to article

Authors and Affiliations

Marzena Kurpińska
1
ORCID: ORCID
Aldona Wcisło
2
ORCID: ORCID

  1. Gdańsk University of Technology, Faculty of Civil and Environmental Engineering, ul.Narutowicza 11/12, 80-233 Gdańsk, Poland
  2. Warsaw University of Technology, Faculty of Civil Engineering, Al. Armii Ludowej 16, 00-637 Warsaw, Poland
Download PDF Download RIS Download Bibtex

Abstract

Extremely intensive development of technology has resulted in many innovations. There are new methods of acquiring spatial data, such as laser scanning, unmanned aerial vehicles or digital non-metric cameras, which are the subject of this study. Integration of this data has become a new tool that has expanded existing measurement capabilities, finding applications in 3D modelling, archaeology and monument conservation. Owing to scanning, we can get the coordinates of almost every point of the scanned surface, obtaining full and detailed information about the object dimensions. The level of technical advancement of digital cameras allows them to be successfully used in short-range photogrammetry [27], and recently also in low-altitude aerial photogrammetry (unmanned aerial vehicles). Two different test objects were selected to achieve the intended purpose. The monument located on the 14-meter-high top of the Wanda Mound was adopted as the first object. It consists of a simple rectangular plinth made of brown marble. On its top there is a figure of an eagle with a crown of white marble. On the west wall of the plinth there is an inscription “Wanda” and a drawing showing a sword crossed with a distaff. The following features supported the choice of the monument: interesting shape of the object, which includes both simple geometric forms with large and flat surfaces (plinth), and more detailed surfaces (figure of an eagle); detailed texture of the object (complicated marble veins, wing details). The second object under study was The Helena Modrzejewska National Stary Theatre. The building was rebuilt in the style of Viennese Art Nouveau, so that it fully incorporates into the rest of buildings. Measurements included data obtained from a non-metric camera, Leica ScanStation scanner and DJI S 1000 multi-rotor.
Go to article

Authors and Affiliations

Izabela Piech
1
ORCID: ORCID
Tomasz Adam
2
Paulina Dudas
2

  1. Krakow University of Agriculture, Faculty of Environmental Engineering and Land Surveying, Al. Mickiewicza 24/28, 30-059 Krakow, Poland
  2. Graduate of the University of Agriculture in Krakow, Faculty of Environmental Engineering and Land Surveying, Al.Mickiewicza 24/28, 30-059 Krakow, Poland
Download PDF Download RIS Download Bibtex

Abstract

A growing number of Czech construction companies now recognise the importance of supplementing traditional financial measurements with a wider range of non-financial measurements as well. A significant number of organisations are adopting different models of performance measurement to implement business improvement strategies. The main aim of our research was to elucidate the importance that Czech construction companies attach to the individual criteria used in measurement systems. Original data were collected using a questionnaire survey. The answers were quantified in terms of the frequency of occurrence and relative importance index. The results show that traditional measurement criteria such as time and cost are still the most important for construction companies measurement systems. Positive finding is that certain new areas of measurement are increasingly being incorporated into measurement practice and their importance for Czech construction companies is growing rapidly, especially in the area of measuring the productivity of workers and craftsmen together with the productivity of subcontractors. The environmental impact of construction is still one of the least important areas in the measurement systems of construction contracts in Czech construction companies.
Go to article

Authors and Affiliations

Petr Trtílek
1
ORCID: ORCID
Tomáš Hanák
1
ORCID: ORCID

  1. Brno University of Technology, Faculty of Civil Engineering, Veverí 331/95, 602 00 Brno, Czech Republic
Download PDF Download RIS Download Bibtex

Abstract

The heat transfer coefficient during the pool boiling on the outside of a horizontal tube can be predicted by correlations. Our choice was based on ten correlations known from the literature. The experimental data were recovered from the recent work, for different fluids used. An evaluation was made of agreement between each of the correlations and the experimental data. The results of the present study firstly showed a good reliability for the correlations of Labuntsov [10], Stephan and Abdeslam [11] with deviations of 20% and 27%, respectively. Also, the results revealed acceptable agreements for the correlations of Kruzhlin [6], Mc Nelly [7] and Touhami [15] with deviations of 26%, 29% and 29% respectively. The remaining correlations showed very high deviations from the experimental data. Finally, improvements have been made in the correlations of Shekriladze [12] and Mostinski [9], and a new correlation was proposed giving convincing results.
Go to article

Bibliography

[1] I.L. Pioro, W. Rohsenow, and S.S. Doerffer. Nucleate pool-boiling heat transfer. II: Assessment of prediction methods. International Journal of Heat and Mass Transfer, 47(23):5045–5057, 2004. doi: 10.1016/j.ijheatmasstransfer.2004.06.020.
[2] A. Sathyabhama and R.N. Hegde. Prediction of nucleate pool boiling heat transfer coefficient. Thermal Science, 14(2):353–364, 2010. doi: 10.2298/TSCI1002353S.
[3] T. Baki, A. Aris, and M. Tebbal. Investigations on pool boiling of refrigerant R141b outside a horizontal tube, Archive of Mechanical Engineering, 68(1):77–92, 2021. doi: 10.24425/ame.2021.137042.
[4] T. Baki. Survey on the nucleate pool boiling of hydrogen and its limits. Journal of Mechanical and Energy Engineering, 4(2):157–166, 2020. doi: 10.30464/jmee.2020.4.2.157.
[5] T. Baki. Pool boiling of ammonia, assessment of correlations. International Journal of Air-Conditioning and Refrigeration, 29(02):2150012, 2021. doi: 10.1142/S2010132521500127.
[6] G.N. Kruzhilin. Free-convection transfer of heat from a horizontal plate and boiling liquid. Doklady AN SSSR (Reports of the USSR Academy of Sciences), 58(8):1657–1660, 1947.
[7] M.J. Mc Nelly. A correlation of rates of heat transfer to nucleate boiling of liquids. Journal of Imperial College Chemical Engineering Socoiety, 7:187–34, 1953.
[8] H.K. Forster, and N. Zuber. Dynamics of vapor bubbles and boiling heat transfer. AIChE Journal, 1(4):531–535, 1955. doi: 10.1002/aic.690010425.
[9] I.L. Mostinski. Application of the rule of corresponding states for calculation of heat transfer and critical heat flux. Teploenergetika, 4(4):66–71, 1963.
[10] D.A. Labuntsov. Heat transfer problems with nucleate boiling of liquids. Thermal Engineering, 19(9):21–28, 1972.
[11] K. Stephan, and M. Abdelsalam. Heat-transfer correlations for natural convection boiling. International Journal of Heat and Mass Transfer, 23(1):73–87, 1980. doi: 10.1016/0017-9310(80)90140-4.
[12] I.G. Shekriladze. Boiling heat transfer: mechanisms, models, correlations and the lines of further research. The Open Mechanical Engineering Journal, 2:104–127, 2008. doi: 10.2174/1874155X00802010104.
[13] V.V. Yagov. Nucleate boiling heat transfer: Possibilities and limitations of theoretical analysis. Heat and Mass Transfer, 45(7):881–892, 2009. doi: 10.1007/s00231-007-0253-8.
[14] S. Fazel and S. Roumana. Pool boiling heat transfer to pure liquids. In WSEAS Conf, 2010.
[15] T. Baki, A. Aris, and M. Tebbal. Proposal for a correlation raising the impact of the external diameter of a horizontal tube during pool boiling. International Journal of Thermal Sciences, 84:293–299, 2014. doi: 10.1016/j.ijthermalsci.2014.05.023.
[16] M.G. Kang. Effect of surface roughness on pool boiling heat transfer. International Journal of Heat and Mass Transfer, 43(22):4073–4085, 2000. doi: 10.1016/S0017-9310(00)00043-0.
[17] M.G. Kang. Local pool boiling coefficients on a horizontal tubes. Journal of Mechanical Science and Technology, 19(3):860–869, 2005. doi: 10.1007/BF02916134.
[18] J.S. Mehta and S.G. Kandlikar. Pool boiling heat transfer enhancement over cylindrical tubes with water at atmospheric pressure, Part II: Experimental results and bubble dynamics for circumferential V-groove and axial rectangular open microchannels. International Journal of Heat and Mass Transfer, 64:1216–1225, 2013. doi: 10.1016/j.ijheatmasstransfer.2013.04.004.
[19] S.K. Das, N. Putra, and W. Roetzel. Pool boiling of nano-fluids on horizontal narrow tubes. International Journal of Multiphase Flow, 29(8):1237–1247, 2003. doi: 10.1016/S0301-9322 (03)00105-8.
[20] G. Prakash Narayan, K.B. Anoop, G. Sateesh, and S.K. Das. Effect of surface orientation on pool boiling heat transfer of nanoparticle suspensions. International Journal of Multiphase Flow, 34(2):145–160, 2008. doi: 10.1016/j.ijmultiphaseflow.2007.08.004.
[21] D. Gorenflo, F. Gremer, E. Danger, and A. Luke. Pool boiling heat transfer to binary mixtures with miscibility gap: Experimental results for a horizontal copper tube with 4.35~mm O.D. Experimetal Thermal Fluides Sciences, 25(5):243–254, 2001. doi: 10.1016/S0894-1777(01)00072-3.
[22] Z.H. Liu and Y.H. Qiu. Enhanced boiling heat transfer in restricted spaces of a compact tube bundle with enhanced tubes. Applied Thermal Engineering, 22(17):1931–1941, 2002. doi: 10.1016/S1359-4311(02)00111-4.
[23] Y.H. Qiu and Z.H. Liu. Boiling heat transfer of water on smooth tubes in a compact staggered tube bundle. Applied Thermal Engineering, 24(10):1431–1441, 2004. doi: 10.1016/j.applthermaleng.2003.11.021.
[24] K.G. Rajulu, R. Kumar, B. Mohanty, and H. K. Varma. Enhancement of nucleate pool boiling heat transfer coefficient by reentrant cavity surfaces. Heat and Mass Transfer, 41(2):127–132, 2004. doi: 10.1007/s00231-004-0526-4.
[25] A. Fazel, A. Safekordi, and M. Jamialahmadi. Pool boiling heat transfer in water/amines solutions. International Journal of Engineering, 21(2):113–130, 2008.
[26] S.M. Peyghambarzadeh, M. Jamialahmadi, S.A. Alavi Fazel, and S. Azizi. Experimental and theoretical study of pool boiling heat transfer to amine solutions. Brazilian Journal of Chemical Engineering, 26:26–33, 2009. doi: 10.1590/S0104-66322009000100004.
[27] S. Bhaumik, V.K. Agarwal, and S.C. Gupta. A generalized correlation of nucleate pool boiling of liquids. Indian Journal of Chemical Technology, 2004.
[28] W.C. Elrod, J.A. Clark, E.R. Lady, and H. Merte. Boiling heat transfer data at low heat flux. Journal of Heat Transfer, 87(C):235–243, 1967.
[29] Y. Chen, M. Groll, R. Mertz, and R. Kulenovic. Pool boiling heat transfer of propane, isobutane and their mixtures on enhanced tubes with reentrant channels. International Journal of Heat and Mass Transfer, 48(11):2310–2322, 2005. doi: 10.1016/j.ijheatmasstransfer.2004.10.037.
[30] D. Jung, H. Lee, D. Bae, and S. Oho. Nucleate boiling heat transfer coefficients of flammable refrigerants, International Journal of Refrigeration, 27(4):409–414, 2004. doi: 10.1016/j.ijrefrig.2003.11.007.
[31] J.X. Zheng, G.P. Jin, M.C. Chyu, and Z.H. Ayub. Boiling of ammonia/lubricant mixture on a horizontal tube in a flooded evaporator with inlet vapor quality. {\em Experimental Thermal Fluides Sciences, 30(3):223–231, 2006. doi: 10.1016/j.expthermflusci.2005.06.001.
[32] V. Trisaksri, and S. Wongwises. Nucleate pool boiling heat transfer of TiO2-R141b nanofluids. International Journal of Heat and Mass Transfer, 52(5-6):1582–1588, 2009. doi: 10.1016/j.ijheatmasstransfer.2008.07.041.
[33] J.M.S. Jabardo, G. Ribatski, and E. Stelute. Roughness and surface material effects on nucleate boiling heat transfer from cylindrical surfaces to refrigerants R-134a and R-123. Experimetal Thermal Fluides Sciences, 33(4):579–590, 2009. doi: 10.1016/j.expthermflusci.2008.12.004.
[34] D. Jung, K. An, and J. Park. Nucleate boiling heat transfer coefficients of HCFC22, HFC134a, HFC125 and HFC32 on various enhanced tubes. International Journal of Refrigeration, 27(2):202–206, 2004. doi: 10.1016/S0140-7007(03)00124-5.
[35] S.P. Rocha, O. Kannengieser, E.M. Cardoso, and J.C. Passos. Nucleate pool boiling of R-134a on plain and micro-finned tubes. International Journal of Refrigeration, 36(2):456–464, 2013. doi: 10.1016/j.ijrefrig.2012.11.031.
Go to article

Authors and Affiliations

Touhami Baki
1
ORCID: ORCID
Djamel Sahel
2
ORCID: ORCID

  1. Mechanical Faculty, Gaseous Fuels and Environment Laboratory, USTO-MB, El-M'Naouer, Oran, Algeria
  2. Department of Technical Sciences, Amar Telidji of Laghouat, Algeria
Download PDF Download RIS Download Bibtex

Abstract

The paper deals with Recent and relic phosphatic soils of ornithogenic origin which occur in ice free oasis of the maritime Antarctic Zone (Antarctic Peninsula and King George Island regions). These soils form on rocky and clay weathering covers within and around of penguin rookeries. Their morphology strongly depends on penological character of a substrate and climatic differentiation of a region. They are built of a surface layer of guano and underlying zone of a phosphatized rock. Except organic matter and unstable urates, the guano contains calcium phosphates (fluorapatite somtimes brushite) and magnesium-amonium phosphate (struvite). The phosphatized zone consists of phosphatic- silicate clays in which occur diversified aluminium-iron phosphates bearing potassium and ammonium ions (leucophosphite, minyulite, taranakite, amorphous aluminium phosphate). The guano layer is strongly reduced by erosion and weathering in ornithogenic relic soils left by penguins in areas abandoned by them during Holocene. Formation of a humus horizon of a plant origin may be observed under a vegetation cover in the relic soils. Clays of the phosphatized zone in these areas are transformed in the processes of chemical and mechanical weathering, by mass movements and frost processes.

Go to article

Authors and Affiliations

Andrzej Tatur
Download PDF Download RIS Download Bibtex

Abstract

Investigating human emotions empirically is still considered to be challenging, mostly due to the questionable validity of the results obtained when employing individual types of measures. Among the most frequently used methods to study emotional reactions are self-report, autonomic, neurophysiological, and behavioral measures. Importantly, previous studies on emotional responding have rarely triangulated the aforementioned research methods. In this paper we discuss main methodological considerations related to the use of physiological and self-report measures in emotion studies, based on our previous research on the processing of emotionally-laden narratives in the native and non-native language, where we employed the SUPIN S30 questionnaire as a self-report tool, and galvanic skin response (GSR) as a physiological measure (Jankowiak & Korpal, 2018). The findings revealed a more pronounced reaction to stimuli presented in the native relative to the non-native language, which was however reflected only in GSR patterns. The lack of correlation between GSR and SUPIN scores might have resulted from a number of methodological considerations, such as social desirability bias, sensitive questions, lack of emotional self-awareness, compromised ecological validity, and laboratory anxiety, all of which are thoroughly discussed in the article.

Go to article

Authors and Affiliations

Paweł Korpal
Katarzyna Jankowiak

Abstract

The 14th International Symposium on Sound Engineering and Tonmeistering will be held on May 19-21, 2011, in Wrocław. The Symposium is organized by the Chair of Acoustics, Institute of Telecommunications, Teleinformatics and Acoustics, Wrocław University of Technology, under auspicious of the Polish Section of the Audio Engineering Society. The organizers cordially invite sound engineers, music producers, acousticians, and specialists in sound reinforcement, scientists who deal with sound engineering, sound recording and related areas, students, and employees of the audio industry to participate in the Symposium. The Symposium programme will include lecture sessions and workshop presentations.

Go to article

This page uses 'cookies'. Learn more