Deposits in the form of seams are most often exploited by means of mechanised longwall systems. Hard coal seams of various thicknesses are mined by plowing and shearer complexes. Both solutions are commonly used in Polish and global mining. Mechanised longwall systems consist of many machines, the most important of which are the mining machine, powered support, armoured face conveyor and beam stage loader. The article is concerned with the failure frequency of longwalls equipped with plow and shearer longwall systems in one of the Polish hard coal mines. The analysis covers a period of 13 months of the mine’s operation, during which 2,589 failures were recorded. It was carried out for all longwalls exploited in that period, i.e. five plow and five shearer ones, operating in six different sections. In the analysed period, these longwalls worked for an average of 150 days, and a total of 1,484 days. The analysis takes into account the basic division of failures used in the mining branch, i.e. mining, electrical and mechanical failures. The plow and shearer complexes were analysed separately, taking into account the failure category for all devices. A comprehensive analysis of the failure rates has revealed that the failure rate of longwalls equipped with plow complexes is noticeably higher than that of shearer ones. Moreover, it has been demonstrated that mining failures are prevalent in the analysis of both the number of failures and the average duration of failures.

The paper is devoted to the description of the methodology and research by design carried out to identify solutions enhancing the functional flexibility of a high-rise building located in Warsaw at. Grzybowska Street. The work presents the theoretical background as well as the conducted research and methodology. The scope of solutions related to functional flexibility concerned the interchangeability of service functions in the podium part of the building, changes in the use of the parking lot, and the provision of the means of changes in the arrangement of types and variants of types of apartments on the apartments levels. The investigation was carried out in the pre-design and design phases. Objectives and criteria of solutions were defined, and research works were carried out through iterations and checking in terms of the cost-effectiveness . The adopted solutions consist in designing the optimal hard portion of the building – the core, the structural system, the arrangement of zones and installation rooms, and the use of structural and spatial over-designed systems. An optimal facade module has been developed. The research aims to introduce the design practice to the issue of flexibility, which is nowadays important for economic and environmental reasons.

The aim of the paper is to present the hydrodynamic, mass transfer and illumination characteristics of a laboratory helical-tube photobioreactor Biostat PBR-2S, commercially available and used in many laboratories in Poland and worldwide. The investigated hydrodynamics parameters were: mean liquid circulation rate, liquid velocity/residence time in the tubular part of the apparatus and mixing time, measured in the wide range of rotary speed of the circulation pump. The influence of the aeration intensity on these parameters was also checked. The volumetric oxygen and carbon dioxide transfer coefficients in the liquid phase and their dependency on the liquid circulation rate and gas inflow rate were determined. The experiments were performed in tap water and then in a real three-phase cultivation broth at the end of thermophilic cyanobacteria T. synechococus growth. For the final evaluation of the tested PBR there were series of test cultivations run under different conditions of illumination. The highest final concentration of the biomass of tested cyanobacteria reached the relatively high value of 4.38 g/dm3 of the dry biomass, although the process conditions were not fully optimized. The laboratory photobioreactor PBR-2S proved to be a good tool for investigations of microalgae cultivation processes. The presented results and practical observations may help to analyze and understand the mutual influence of the specific process parameters in the described PBR, especially during autotrophic organism cultivations.