Nauki Techniczne

Gospodarka Surowcami Mineralnymi - Mineral Resources Management

Zawartość

Gospodarka Surowcami Mineralnymi - Mineral Resources Management | 2019 | vol. 35 | No 2

Abstrakt

The main subject of research in this paper is glauconite with its useful parameters, which is the object of exploitation in the “Górka Lubartowska-Niedźwiada” deposit. The main glauconitic horizon (lower Eocene) is built by loamy fine-grained and medium greenish sands with marine fauna and fragments of amber (ca. 7 m thick). Thin lamins and pockets of silts containing phosphorites and also glauconitic sands with underlaying very thin quartz-glauconitic sands are found at the bottom of this layer. The glauconite deposit in “Górka Lubartowska-Niedźwiada” is an amount of ca. 30% by volume of the main glauconitic horizon. Glauconite of the 1M polytype (XRD) shows large granulometric and morphological differentiation (SEM-EDS). It frequently contains aggregations of euhedral or framboidal pyrite grains (RS), which is indicative of the euxinic nature of the formation environment of the rocks under study. The individual glauconite grains show distinct chemical variability, manifested in a lower share of Al2O3 and an increased content of MgO and CaO (EPMA, XRF). At the same time, a large share of K2O (above 8% by weight) allows it to be included in highly matured glauconite, thus it can be considered as a potential raw material for the production of mineral fertilizers. The association of glauconite with phosphates (SEM-EDS) and anatase inclusions in the grains of glauconite (RS) indirectly point to the contribution of the decomposing organic matter to the formation of grains of this mineral. The xylite fragments preserved in the sediment show a low degree of coalification, which is typical of soft lignite. This also shows that the transformation process was taking place under a relatively small overburden.

Przejdź do artykułu

Autorzy i Afiliacje

Lucyna Natkaniec-Nowak
Adam Piestrzyński
Marian Wagner
Wiesław Heflik
ORCID: ORCID
Beata Naglik
Jan Paluch
Krzysztof Pałasz
Stanislava Milovská
Paweł Stach

Abstrakt

This paper aims to characterize and interpret the trends in reserves, resources, and mine production of diatomite in the Czech Republic in last two decades. With more than 2.4 million tonnes of total reserves, 1.6 million tonnes of exploitable (recoverable) reserves, and average annual production of 35 kt, diatomite is not one of the key industrial minerals of the Czech Republic, which ranks among the top 10 European producers. Historical diatomite deposits were situated within the Cheb Basin, where the Holocene Hájek diatomite deposit was abandoned in 1955 because of the establishment of the Soos National Natural Monument. The group of Tertiary diatomite deposits situated in the Central Bohemian Upland ceased extraction when the last deposit (Kučlín) was abandoned in 1966 after depletion of reserves. The last group of diatomite deposits is located within the Southern Bohemian basins, where the last productive deposit, Borovany-Ledenice, is situated. Miocene diatomites are extracted by open pit mining there. Production of crude diatomite varied from 0 to 83 kt, with an average of 35 kt, between 1999 and 2018 according to stockpiles. Raw diatomite is classified into two groups according to the chemical-technological properties. Better-quality diatomite (SiO2 ≥ 72%, Al2O3 ≤ 15%, Fe2O3 < 2.4%, bulk density 450 kg/m3, loss on ignition < 8%) is processed for filtration in the food industry (brewery, wine, and raw fruit juices). Material with lower quality is used in combination with bentonite to prepare cat litter products.

Przejdź do artykułu

Autorzy i Afiliacje

Jan Zahradník
Jakub Jirásek
Jiří Zahradník
Martin Sivek

Abstrakt

The research involved coal from 11 coal mines in the USCB in Poland, intended for combustion in power plants and for home furnaces. It has been stated that the content of As, Cd, Co, Cr, Cu, Mo, Ni, Pb, Sb and Zn in the ash of coal fines from the USCB with a density of <1.30 × 103 kg/m3 is the largest, and in the ash fraction with a density >2.00 × 103 kg/m3 is the smallest The fraction ash of coal fine with a density> 2.00 × 103 kg/m3 has the greatest impact on the content of As, Cd, Co, Cr, Mo, Pb and Zn in whole coal fines from the USCB. In turn, the largest impact on the content of Cu, Ni and Sb in whole fine coal ash has the fraction of coal fine having a density of 1.60–2.00 × 103 kg/m3 (for Cu) and fraction with a density <1.35 × 103 kg/m3 (Ni and Sb). The main carriers of elements in fine coal ash, thus in future furnace waste, are the grains of aluminosilicates and iron oxides resulting from the combustion of probably fusinite and semifusinite and the combustion of adhesions of these macerals with dolomite, ankerite and pyrite. The purification of fine coal from the matter with a density >2.00 × 103 kg/m3 may reduce the sulfur content (by 40%), the content of main element oxides (from 33% to 85%) and the content of ecotoxic elements (from 7% to 59%) in fine coal ash, i.e. in potential furnace wastes. Due to the small content of mineral matter, ash and sulfur in coal, small content of Al, Fe, Ca, Mg, Na, K, P oxides and high content of SiO2 in coal ash, low value of the Rogi sinterability index, small inclination of coal fine to slag the furnaces and boiler fouling by sludge, the investigated coal was favorable for technological reasons, fuel in power plants and for home furnaces

Przejdź do artykułu

Autorzy i Afiliacje

Henryk R. Parzentny
Leokadia Róg

Abstrakt

The aim of the paper is the petrographic characterization of coal from the Wieczorek mine and the residues after its gasification. The coal was subjected to gasification in a fluidized bed reactor at a temperature of about 900°C and in an atmosphere of oxygen and CO2. The petrographic, proximate, and ultimate analysis of coal and char was performed. The petrographic composition of bituminous coal is dominated by macerals of the vitrinite group (55% by volume); macerals of inertinite and liptinite groups account for 23% and 16.0%, respectively. In the examined char, the dominant component is inertoid (41% vol.). Mixed dense and mixed porous account for 10.9% and 13.5% vol., respectively. In addition, the examined char also contained unreacted particles such as fusinoids, solids (11.3% vol.), and mineroids (5.1% vol.). The char contains around 65% vol. of low porosity components, which indicates a low degree of carbon conversion and is associated with a low gasification temperature. The char was burned and the resulting bottom and fly ashes were subjected to petrographic analysis. Their composition was compared with the composition of ashes from the combustion of bituminous coal from the Wieczorek mine. Bottom ashes resulting from the combustion of bituminous coal and char did not differ significantly in the petrographic composition. The dominant component was mineroid, which accounted for over 80% vol. When it comes to fly ash, a larger amount of particles with high porosity is observed in fly ash from bituminous coal combustion.

Przejdź do artykułu

Autorzy i Afiliacje

Natalia Maciejończyk
Barbara Bielowicz

Abstrakt

The cement production process is associated with the emission of dust. These are mainly CKD (cement kiln dust) and BPD (by-pass dust), classified as wastes from group 10 – Wastes from thermal processes, subgroups 10 and 13 – wastes from manufacture of cement, lime and plaster and articles and products made from them. Cement kiln dust is a waste of variable composition and properties, which makes it a difficult material to recover. The main directions of recovery presented in the world literature indicate the use of dust from cement kilns in cement, mortar and concrete production, the production of bricks and in order to improve soil quality and wastewater treatment. Factors affecting chemical and phase compositions of dust from cement kilns are the reason why each waste should be analyzed individually. The paper presents the results of the analysis of the cement kiln dust after dedusting cement kilns and two bypass dusts. Analysis of the chemical composition has shown significant concentrations of chlorine, potassium and calcium in all wastes. The content of: Si, S, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Zr, Pb, and Bi has also been confirmed. The analyzed dusts were characterized by the presence of carbonates (calcite, dolomite, and arcanite), quartz, alite, belite, sylvine, anhydrite, and portlandite in their phase composition. The leachates which were characterized by an alkaline reaction. In terms of leachability, high concentrations of chlorine ions in the analyzed dust leachates were confirmed, which significantly limits their use.

Przejdź do artykułu

Autorzy i Afiliacje

Alicja Uliasz-Bocheńczyk

Abstrakt

Plastic obtained from the discarded computers, televisions, refrigerators, and other electronic devices is termed as e-plastic waste. E-plastic waste is non-biodegradable waste. This paper focuses to investigate the replacement of fine aggregate with plastic aggregate obtained from e-plastic. The paper presents a detailed comparison of concrete properties (i.e.: compressive strength, tensile strength, flexural strength, density and workability) for normal concrete and concrete containing e-plastic fine aggregates. The testing was conducted according to the ASTM standards. 28-day Compressive, Flexural and Split tensile strengths were determined. In addition to the effect of e-plastic fine aggregate, silica fume is added as an admixture to find the effect on strengths. Authors have performed a compressive, flexural and tensile test of concrete mix with various percentages of e-plastic aggregates (i.e., 0, 5, 10, 15 and 20%) and silica fume (i.e.: 0, 5 and 10%) and concrete densities are also considered. It has been concluded that an increase in the e-plastic fine aggregate results in reduction in densities, compressive, flexural and tensile strength values. However, when we add silica fume to the concrete mixture it leads to strength values similar to the control mixture. The optimum obtained concrete blend contained 5% e-plastic fine aggregates and 10% silica fume. The addition of silica fume in concrete mixtures increases the 28-day compressive, flexural and tensile strengths. Moreover, the density of concrete decreases with the increase in the e-plastic aggregates.

Przejdź do artykułu

Autorzy i Afiliacje

Adil Farooq
Muneeb Abid Malik
Tauqeer Tariq
Mamoon Riaz
Waqas Haroon
Awais Malik
Mujeeb Ur Rehman

Abstrakt

The purpose of the work was to predict the selected product parameters of the dry separation process using a pneumatic sorter. From the perspective of application of coal for energy purposes, determination of process parameters of the output as: ash content, moisture content, sulfur content, calorific value is essential. Prediction was carried out using chosen machine learning algorithms that proved to be effective in forecasting output of various technological processes in which the relationships between process parameters are non-linear. The source of data used in the work were experiments of dry separation of coal samples. Multiple linear regression was used as the baseline predictive technique. The results showed that in the case of predicting moisture and sulfur content this technique was sufficient. The more complex machine learning algorithms like support vector machine (SVM) and multilayer perceptron neural network (MPL) were used and analyzed in the case of ash content and calorific value. In addition, k-means clustering technique was applied. The role of cluster analysis was to obtain additional information about coal samples used as feed material. The combination of techniques such as multilayer perceptron neural network (MPL) or support vector machine (SVM) with k-means allowed for the development of a hybrid algorithm. This approach has significantly increased the effectiveness of the predictive models and proved to be a useful tool in the modeling of the coal enrichment process.

Przejdź do artykułu

Autorzy i Afiliacje

Alina Żogała
Maciej Rzychoń

Abstrakt

One of the elements of the Polish Energy Policy program is the development of renewable energy, including energy from biomass combustion. In Poland, the Green Block was built at the Połaniec Power Station fired with 100% biomass fuel. This solution is conducive not only to obtaining energy but also to improving environmental protection. During the combustion of biomass in a fluidized bed boiler, about 50 thousand tons of fly ash per year being a source of nutrients for plants, for example potassium salts, phosphorus, calcium, boron compounds, etc. was derived. The subject of the research were three types of ashes from biomass combustion containing 80% dendromass and 20% agromass. Agromas was made of straw, dried material or sliced palm nuts. The physical characteristics and chemical composition of three basic fly ash samples are presented. Due to the high fineness and thus dusting during spreading, it was found that there is no possibility of the direct use of fly ash from biomass combustion as an alkalizing agent for acidic soils. The lowest bulk density was demonstrated by samples of fly ash originating from the combustion of biomass containing 20% straw as agromass, while the poorest in potassium and phosphorus were ash samples obtained from the combustion of biomass containing 20% agromass in the form of palm kernel slate. As additional components, mineral acids as well as inorganic compounds, including industrial waste, were used to correct the chemical composition and to mineral fertilizer granulation. The number of introduced components was related to the postulated composition of the produced fertilizer. Examples of mineral fertilizers obtained, both simple and multicomponent fertilizers, are presented.

Przejdź do artykułu

Autorzy i Afiliacje

Sylwester Eugeniusz Żelazny
Andrzej Jarosiński

Abstrakt

The main optimized objects in underground mines include: stope layout, access layout and production scheduling. It is common to optimize each component sequentially, where optimal results from one phase are regarded as the input data for the next phase. Numerous methods have been developed and implemented to achieve the optimal solution for each component. In fact, the interaction between different phases is ignored in the tradition optimization models which only get the suboptimal solution compared to the integrated optimization model. This paper proposes a simultaneous integrated optimization model to optimize the three components at the same time. The model not only optimizes the mining layout to maximize the Net Present Value (NPV), but also considers the extension sequence of stope extraction and access excavation. The production capacity and ore quality requirement are also taken into account to keep the mining process stable in all mine life. The model is validated to a gold deposit in China. A two-dimensional block model is built to do the resource estimation due to the clear boundary of the hanging wall and footwall. The thickness and accumulation of each block is estimated by Ordinary Kriging (OK). In addition, the conditional simulation method is utilized to generate a series of orebodies with equal possibility. The optimal solution of optimization model is carried out on each simulated orebody to evaluate the influence of geological uncertainty on the optimal mining design and production scheduling. The risk of grade uncertainty is quantified by the possibility of obtaining the expected NPV. The results indicate that the optimization model has the ability to produce an optimal solution that has a good performance under the uncertainty of grade variability.

Przejdź do artykułu

Autorzy i Afiliacje

Jie Hou
Guoqing Li
Nailian Hu
Hao Wang

Abstrakt

In order to fully adapt to market requirements, mining enterprises in recent years have implemented standardized systems for quality, safety and health at work and environmental management. The standards for individual systems define the requirements of applying specific procedures and actions to implement the adopted policy aimed at achieving the assumed goals. The combination of business procedures and practices is more effective in the case of their integration than the activities carried out under separate systems. They then function under the name of an integrated management system (IMS). Properly implemented IMSs most often contributes to a more harmonious functioning of the enterprise and the elimination of recurring activities in the areas concerning individual systems, and thus to the optimization of costs related to their implementation and maintenance. Improving the operational efficiency of the mining enterprise and mines included in it, while maintaining the requirements of work safety and environmental protection. In the conditions of a market economy, improving the efficiency of functioning and providing sources of business financing is a key necefity for mining enterprise (Bąk 2007, 2008). Mines need to be properly managed to survive. The key problem is the design and implementation of an efficient management system and its continuous improvement based on the adequacy of system solutions. This is an answer to the question whether the management system of a mining enterprise (mine) corresponds to its real needs in the process of achieving objectives. Improvement of management systems must be based on an appropriate diagnosis. The aim of the article is to present the original solution, which is a tool for improving the integrated management system in Polish mining enterprises.

Przejdź do artykułu

Autorzy i Afiliacje

Patrycja Bąk
Agnieszka Nowak

Dodatkowe informacje

The subject matter of the articles published in Mineral Resources Management covers issues related to minerals and raw materials, as well as mineral deposits, with particular emphasis on:

  • The scientific basis for mineral resources management,
  • The strategy and methodology of prospecting and exploration of mineral deposits,
  • Methods of rational management and use of deposits,
  • The rational exploitation of deposits and the reduction in the loss of raw materials,
  • Mineral resources management in processing technologies,
  • Environmental protection in the mining industry,
  • Optimization of mineral deposits and mineral resources management,
  • The rational use of mineral resources,
  • The economics of mineral resources,
  • The raw materials market,
  • Raw materials policy,
  • The use of accompanying minerals,
  • The use of secondary raw materials and waste,
  • Raw material recycling,
  • The management of waste from the mining industry.

Ta strona wykorzystuje pliki 'cookies'. Więcej informacji