In this publication, the strategy of land resources administration is presented on the basis of consideration of proposed result factors. The research methodology is based on the use of the PESTLE analytical model in conjunction with economic-mathematical modeling. The scientific novelty of the publication is developing the technology of administration of land resources on the basis of cadastral and other statistical information, which allows obtaining scientifically grounded solutions on the use of land resources. Considering the process of Land Resources Administration as a procedure based on making certain decisions when creating a management system which takes into account the internal and external relationships in this system, the postulate is about determining the degree of trust in this system, establishing economic, environmental and social risks when using it. To a certain extent, the process of Land Resources Administration is a prediction of the effective use of this natural potential in the future. It should be noted that the reliability of the forecast decision depends on the nature and parameters of uncertainties and the duration of their validity. Consequently, while making operational decisions on land resources for a short perspective, the forecasting is more reliable than for a long one. It becomes an effective mechanism of objective evaluation of the state of land resources and the prospects for their use. In this publication the main influencing decision making factors and the technological scheme of the solution of the problem are given.
This paper aims to characterize and interpret the trends in reserves, resources, and mine production of diatomite in the Czech Republic in last two decades. With more than 2.4 million tonnes of total reserves, 1.6 million tonnes of exploitable (recoverable) reserves, and average annual production of 35 kt, diatomite is not one of the key industrial minerals of the Czech Republic, which ranks among the top 10 European producers. Historical diatomite deposits were situated within the Cheb Basin, where the Holocene Hájek diatomite deposit was abandoned in 1955 because of the establishment of the Soos National Natural Monument. The group of Tertiary diatomite deposits situated in the Central Bohemian Upland ceased extraction when the last deposit (Kučlín) was abandoned in 1966 after depletion of reserves. The last group of diatomite deposits is located within the Southern Bohemian basins, where the last productive deposit, Borovany-Ledenice, is situated. Miocene diatomites are extracted by open pit mining there. Production of crude diatomite varied from 0 to 83 kt, with an average of 35 kt, between 1999 and 2018 according to stockpiles. Raw diatomite is classified into two groups according to the chemical-technological properties. Better-quality diatomite (SiO2 ≥ 72%, Al2O3 ≤ 15%, Fe2O3 < 2.4%, bulk density 450 kg/m3, loss on ignition < 8%) is processed for filtration in the food industry (brewery, wine, and raw fruit juices). Material with lower quality is used in combination with bentonite to prepare cat litter products.
In recent years, the outsourcing of a variety of different activities has been more commonly observed in the coal mining industry. This is connected with employing workers by external companies. These practices are not necessarily perceived as good ones by mines’ employees because they may influence their remuneration directly or indirectly. Firstly, as external employees treat work in mining company as a source of a quick income. Therefore, external companies often calculate their employees compensation not based on working time (i.e. hours) but on the basis of a specific, accomplished task. Such employment is called piecework, whereas the workers employed in this kind of system are called output workers/piece workers. Therefore, to receive higher wages in these companies, employees carry out their tasks faster and more efficiently. This, in turn, can affect the standards of workers employed by the mining company. In addition, outsourced workers are often retired miners, so the costs incurred by employers are significantly lower. In addition, in order to not to lose the retirement benefit, they work for a much lower rate. On the other hand, outsourced work can be done in a hurry (on a piece rate), which is not conducive to compliance with safety regulations, therefore mine employees may feel unsafe. This article aims to present how mine employees assess outsourcing underground works. In order to achieve this aim, a survey was carried out among employees of one of the coal mine companies in Silesia. Participants of the survey were randomly chosen among underground miners employed at one mine company. The survey was anonymous which obviously might have influenced respondents’ honesty in answering. The survey was carried out in several mines of the chosen company. In some of them the survey was carried out online and in the remaining ones it was filled out on paper. Analyzing the survey results allowed for a better understanding of the reasons of the disapproval of outsourcing underground works. This, in turn, may be used for better human resources management including, in particular, planning an incentive based pay system.
Polish exploration and exploitation of marine resources of Antarctic waters date back to the reconnaissance cruise of the Sea Fisheries Institutes (SFI) r/v Profesor Siedlecki in 1974. Since 1975, a co-operation between the Institute of Ecology, Polish Academy of Sciences (PAS) at Dziekanów Leśny and SFI in Gdynia with participation of the University of Agriculture in Szczecin, Faculty Marine Fisheries and Food Technology (UA) was established. Fishing fleets of the Polish Deep-Sea Fisheries Companies Odra, Dalmor and Gryf, since 1976 were operating in the Atlantic sector of Antarctic waters, south of the convergence.
Coal reserves in the Czech Republic are estimated to be 10 billion tons – hard coal about 37%, brown coal about 60% and lignite 3%. Hard coal is produced in Northern Moravia. In 2017 the production of hard coal was 5.5 million tons. Brown coal is mined in North-Western Bohemia − the production of brown coal in 2017 was 38.1 million tons. Significant quantities of hard coal are exported to: Slovakia, Austria, Germany and Hungary. In accordance with the National Energy Policy, coal will remain the main source of energy in the country in the future, despite the increased use of nuclear energy and natural gas. The government expects that in 2030 energy from coal will account for 30.5% of energy produced. There are five coal companies in the Czech Republic: OKD, a.s., the only hard coal producer and four brown coal mining companies: Severočeské Doly a.s., owned by ČEZ, the largest producer of brown coal, Vršanská uhelná a.s., with coal resources until 2055, Severní energetická a.s. with the largest brown coal reserves in the Czech Republic and Sokolovska uhelná a.s., the smallest mining company extracting lignite. OKD operates coal in two mines Kopalnia Důlní závod 1 – (consists of three mines: ČSA Mine, Lazy Mine, Darkov Mine) and Mine Důlní závod 2 (ttwo mines Sever, Jih). The article also presents a pro-ecological solution for the management of waste heaps after coal enrichment – a plant for the enrichment of coal waste from the Hermanice heap.
”Bio” technologies are significant for the future prospects and for knowledge based bioeconomy in general. In the article we examine two areas of problems – one connected to the issue of use of genetic resources and traditional knowledge and another – connected to new plant breeding techniques. We examine whether the law is up to date with the developments in the area of biotechnology and if there is a need for legislative changes in these areas. As it turns out, the necessary legislation may be significantly behind the progress of bio-science. Also, we present potential paths for solving such problems.
The article characterizes geological formations occurring in the Polish lignite deposits having the characteristics of raw materials, i.e. accompanying minerals, giving their location, quality characteristics, estimated resources and potential applications. Attention has also been paid to the economic suitability, e.g. in infrastructure works and for the reclamation of many geological formations found in the overburden, classified as so-called earth or rock mass. There are also raw materials of sorption properties representing a huge potential source of minerals valuable for the economy and environmental protection. This refers to e.g.: beidellite clays from Bełchatów, Poznań clays from the region of Konin and Adamów, lacustrine chalk from Bełchatów, as well as Mesozoic limestone from the lignite bedding in Bełchatów. The reasons for the unsatisfactory use of accompanying minerals have been given. The authors described the methods used in the mining operation and processing of associated minerals, also applicable in Poland, as the legal basis for the extraction of these minerals and the economic and financial conditions. They stressed the need to protect mined not associated minerals used by the construction of anthropogenic deposits. This activity primarily requires regulating the legal status of these deposits and the development and application of an economic and financial system that stimulates the economy of these minerals. In summary, the necessary actions were taken to increase the use of the accompanying minerals and their contribution to the balance of mineral resources in the country.
The article presents a synthetic analysis of the crude oil market in Poland. As of today, this safety is provided mainly on the basis of native lignite and hard coal resources. However, the analysis of the hard coal market conducted by the authors indicates that the carried out mining restructuring (among others) led to an excessive reduction of mining volume and employment level in the hard coal mining sector. This led to a precedent situation when Poland became an importer of this energy carrier. In addition, the European Union’s requirements for greenhouse gas emissions must be taken into account. In connection with the above, it is necessary to search for new energy sources or technologies that enable hard coal to meet the requirements. It is possible to apply the so-called clean coal technologies that allow the greenhouse gas emissions generated during coal combustion to be reduced. As of today, they are not used on a mass scale, because the use of this type of technology involves additional financial expenses. However, taking into account that technologies have been growing faster and faster, are modernized in a shorter time, making a breakthrough discovery took hundreds of years, now it is often a few months, clean coal technologies can become the optimal solution in the near future. It is also necessary to diversify the sources of obtaining imported energy carriers. The article describes coal and crude oil in terms of their mutual substitution. The article is a continuation of research conducted by the authors. Previous publications presented considerations on analogous topics related to natural gas and renewable energy sources. The crude oil market in Poland was analyzed and forecasts for oil extraction and the demand in the world and Poland by 2023 were presented. The SARIMA model was also created. The model made it possible to obtain oil an prices forecast.
Research on participation of social media users has contributed to our understanding of modern citizenship, civic engagement, and contemporary public sphere. Despite a growing interest in participatory practices in social media little is known about the factors affecting political participation of social media users. Based on an online survey of 700 social media users in Poland, this study examines the relationship between social capital (defined at the individual level as a resource embedded in personal networks) and political participation. It has been established that there is a contradictory relationship between social capital and participatory activities of social media users. Apparently, differences between the resources that are only embedded in personal networks on the one hand, and those that can be mobilized for purposive actions on the other, matter when association between social capital and political participation is considered. Moreover, the presence of these resources significantly varies across different types of social relations (family, friends and acquaintances) of respondents engaged in different participatory actions.
The article presents research on the relationship between mining and used resources on the example of Gliśno gravel pit. As regards to resources, the following issues were analyzed: employees’ working time, time of running machines, fuel consumption and electricity consumption. The aim of the publication is to examine the dependencies that exist between the analyzed variables. KPI’s (Key Performance Indicators) were calculated for individual resources. The analysis presented in the publication contains data from 2008-2014.
The continental shelf beyond 200 nautical miles (NM) accounts for a great value for States. The development of technologies and science has allowed the human economic and scientific activities on the deep parts of the ocean floor. The continental shelf is rich with living resources. The living resources of continental shelf are also valuable, since they possess valuable genetic resources for pharmaceuticals and commercial products. Many valuable non-living resources are situated on the continental shelf, including hydrocarbons (oil and gas) and minerals (e.g. manganese, nickel, cobalt, gold, diamonds, copper, tin, titanium, iron, chromium and galena). Therefore, States have spent significant resources on conducting a research and exploring their continental shelf and the Commission on the Limits of the Continental Shelf (CLCS) has received seventy-seven submissions and issued twenty-nine recommendations pursuant to Article 76 (8) of the United Nations Convention on the Law of the Sea (UNCLOS). With the expected improvement of technological capabilities in decades to come, especially, in deep waters, the continental shelf will be explored more thoroughly and perhaps will meet no technological limits.
Natural resources and the extractive industries play a central role in the economy of developing countries and the lives of nearly half of the world’s population. The increasing demand for oil, gas, and mineral resources has led some countries to prioritize the extractive industries; yet, there is growing empirical evidence that in some cases governments have neglected other sectors of the economy, making them highly dependent and vulnerable to volatile commodity prices. Latin American countries face the challenge of changing their model of primary-export specialization and move away from their dependence on natural resource-intensive exports in order to avoid being vulnerable to commodity cycles. In this context, given the limited literature available on measuring the dependence on the extraction of oil, gas and minerals of the Ecuadorian economy, the objective of this article is to twofold. First, to provide a snapshot of the historical and current situation of Ecuador’s natural resource dependence. Second, to estimate the Extractives Dependence Index (EDI) scores for Ecuador for the years 2003 to 2017. The EDI is a generally accepted method for measuring a country’s aggregate dependence on natural and mineral resources. Based on the EDI scores obtained, we analyze the variation of this indicator and investigate the effect of extractives dependence on the Ecuadorian economy. Results show that despite the government’s significant efforts to diversify Ecuador’s economy, the country has a persistent dependence on the extractive sector.
The aim of this paper is to look at the quantitative dimension of public space resources in Polish cities, a comparative analysis of these resources, determining the share of public space in the urban spatial structure and referring this structure to European cities. The concept of ‘public space resources’ has been introduced, and is defined as those areas in the city that fulfill or can fulfill the functions of public space. This concept, and then the proposal of its operationalization, aimed to draw attention to the spatial and physical aspects of public space, which would allow to broaden and supplement social approaches in the study of public space. The quantitative approach to public space proposed in the paper also enabled a comparative research to assess the role of public space in the structure of Polish cities in a more objective manner and refer it to European cities.
Energy and spectral efficiency are the main challenges in 5th generation of mobile cellular networks. In this paper, we propose an optimization algorithm to optimize the energy efficiency by maximizing the spectral efficiency. Our simulation results show a significant increase in terms of spectral efficiency as well as energy efficiency whenever the mobile user is connected to a low power indoor base station. By applying the proposed algorithm, we show the network performance improvements up to 9 bit/s/Hz in spectral efficiency and 20 Gbit/Joule increase in energy efficiency for the mobile user served by the indoor base station rather than by the outdoor base station.
Reasoning with limited computational resources (such as time or memory) is an important problem, in particular in knowledge-intensive embedded systems. Classical logic is usually considered inappropriate for this purpose as no guarantees regarding deadlines can be made. One of the more interesting approaches to address this problem is built around the concept of active logics. Although a step in the right direction, active logics are just a preliminary attempt towards finding an acceptable solution. Our work is based on the assumption that labelled deductive systems (LDSs) o#27;er appropriate metamathematical methodology to study the problem. As a first step, we have reformulated a pair of active logics systems, namely the memory model and its formalized simplification, the step logic, as LDSs. This paper presents our motivation behind this project, followed by an overview of the investigations on meta-reasoning relevant to this work, and introduces in some reasonable detail the MM system.
Blockchain is a technology, which could revolutionize many industries in the future. A system like that is based on a chain of blocks that is used for storing and transferring various data, forming a decentralized ledger. Although various fundamental projects based on the blockchain system in the energy industry are in their early stage of development, as well as other solutions, applications of blockchain technology in the broadly understood power engineering sector are considered to have a very large potential. This paper presents a brief description of the blockchain technology, its general operating principle and the possibilities it brings. The next section of the article contains a characterization of two exemplary and possible blockchain technology applications, which in the perspective of time may have a significant impact on the power engineering sector. The first solution is related to carrying out energy transactions, which could be conducted in an easy way directly between energy producers and consumers. Thanks to blockchain technology, this could lead to a partial decentralization in that area. The second proposed example concerns energy resources origin tracking, which would allow fixed origin attributes and parameters affecting the environment to be assigned to the generated energy. By implementing that solution, it would be possible to construct a fuel footprint of individual generating units. The article also mentions examples of other potential applications of blockchain technology in the power engineering sector.
LABLITA-Suite. Resources for the acquisition of Italian as a second language – LABLITA-suite provides technology-enhanced learning resources for the acquisition of Italian L2. IMAGACT allows for mastering the semantic properties of action verbs in the early phases of language acquisition. The LABLITA corpus of Spoken Italian can be used for training learners for face to face conversations. RIDIRE and CORDIC provide corpus linguistic tools for accessing Italian phraseology, which is useful for enhancing writing capabilities in the various domains of language usage.
In this research, the high arsenic content dust of copper smelting, as a raw material, the extraction of copper and arsenic from the high arsenic content dust in the leaching system containing acidic and alkaline compounds was investigated. Meanwhile, the effects of acid/alkaline initial concentration, liquid to solid ratio, leaching temperature, leaching time on the leaching rate of copper and arsenic were studied. The optimum conditions for the leaching of high arsenic content dust and preparation of copper arsenate were determined. The results showed that acidic/alkaline leaching of high arsenic content dust was particularly effective. 93.2% of the copper, and 91.6% of the arsenic were leached in an acidic leaching process and 95% of the arsenic, while less than 3% of the copper, less than 5% of the antimony, less than 2% of the bismuth was also leached in an alkaline leaching process. A new method (the parallel flow drop precipitate method) was developed in the synthesis of copper arsenate process. The parallel flow drop method was employed to adjust the molar ratio (copper to arsenic) of the mixed solution of the acid-leaching solution and the alkali-leaching solution by taking the drop acceleration of an acidic leaching solution and an alkaline leaching solution at 10 mL/min and 12 mL/min, at a temperature of 60°C and a reaction time of 1 h. Copper arsenate was prepared by mixing an acidic leaching solution and an alkaline leaching solution. The main phases of copper arsenate were CuHAsO4·1.5H2O and Cu5As4O15·9H2O. Copper arsenate contained 30.13% copper and 31.10% arsenic.
This article reviews the literature on the relationship between the region’s innovation and its development. Various concepts are discussed in the scheme of the four forces of regional and local competitiveness. The main determinants of the region’s innovation and competitiveness can be viewed in a four-force system: domination forces when the region exploits its advantage over others, network power – when the development potential is strengthened by cooperation, external demand and internal resources. In this framework of literature analysis, the article points to both entities and processes that represent the possibilities of the „innovation being” region.
The aim of the article is to determine the main factors responsible for development of Podlaskie Voivodeship in the last 15 years and to answer the question whether they were suffi ciently strong impulse to divert the region from its development path. The research is based on the results of in-depth interviews with the main actors of the regional scene (representing administration, business and science). Statistical data and strategic documents (regional development strategies and regional innovation strategies) was employed in a supporting role. The development of the region has long been based on natural resources, especially agri-food industry (in particular milk production) and tourism. Implementing the concept of smart specialization in the region is seen as a big chance for agri-food industry and sectors linked in the value chain. However the chance to changing the development path of the whole region and moving to higher levels of innovation is very doubtful.
The article aims to evaluate the Portuguese building stock energy policies and strategy for energy saving in buildings among the EU members. It was found out the average heat transfer coefficients of the main structural elements of Portuguese Buildings and analyzed the U-values of this elements considering different time periods. The fundamentals of this study were funded by the Agency for Development and Innovation (ADI) and co-financed by the European Regional Development Fund (FEDER) through the Operational Program for Competitiveness Factors (POFC) assigned to the Building Physics and Construction Technology Laboratory with the reference SB Tool SPT_2011_4.