The aim of the paper was to develop determination methods of sedimentation characteristics using PIV image anemometry and suspension image analysis. Two methods of the investigation of sed- imentation process based on visualization techniques were developed. In the first one, using PIV method, vector fields of the velocity of settling particles are determined and then average particle velocities are calculated to establish the so called sedimentation dynamics curve. In the second one, the methods of suspension image analysis are utilized to determine the positions of the upper dis- continuity and to establish the sedimentation curve. Laboratory research on the sedimentation of agalit particles suspended in glycerine was conducted (using PIV method). Additionally, industrial research on the sedimentation of water-absorbing granular material used after the first carbonation (carbonation I) was conducted in a sugar factory (using the second method). The research consisted of photographic registration of images of the settling suspension by means of the time-lapse photog- raphy technique. A laboratory study was conducted for four values of the volume concentration of agalit particles in glycerine (0.5; 1.0; 1.5 and 2.0 vol%). The research methodology, the scope of the conducted measurements and sample research results together with conclusions are presented in this paper.
Noise propagation within ducts is of practical concern in many areas of industrial processes where a fluid has to be transported in piping systems. The paper presents experimental data and visualization of flow in the vicinity of an abrupt change in cross-section of a circular duct and on obstacles inside where the acoustic wave generates nonlinear separated flow and vortex fields. For noise produced by flow wave of low Mach number, laminar and turbulent flows are studied us- ing experimental sound intensity (SI) and laser particle image velocimetry (PIV) technique adopted to acoustics (A-PIV). The emphasis is put on the development and application of these methods for better understanding of noise generation inside the acoustic ducts with different cross-sections. The intensity distribution inside duct is produced by the action of the sum of modal pressures on the sum of modal particle velocities. However, acoustic field is extremely complicated because pressures in non-propagating (cut-off) modes cooperate with particle velocities in propagating modes, and vice versa. The discrete frequency sound is strongly influenced by the transmission of higher order modes in the duct. By under- standing the mechanism of energy in the sound channels and pipes we can find the best solution to noise abatement technology. In the paper, numerous methods of visualization illustrate the vortex flow as an acoustic velocity or sound intensity stream which can be presented graphically. Diffraction and scattering phenomena occurring inside and around the open-end of the acoustic duct are shown.
Nowadays, the energy cost is very high and this problem is carried out to seek techniques for improvement of the aerothermal and thermal (heat flow) systems performances in different technical applications. The transient and steady-state techniques with liquid crystals for the surface temperature and heat transfer coefficient or Nusselt number distribution measurements have been developed. The flow pattern produced by transverse vortex generators (ribs) and other fluid obstacles (e.g. turbine blades) was visualized using liquid crystals (Liquid Crystal Thermography) in combination with the true-colour image processing as well as planar beam of double-impulse laser tailored by a cylindrical lens and oil particles (particle image velocimetry or laser anemometry). Experiments using both research tools were performed at Gdańsk University of Technology, Faculty of Mechanical Engineering. Present work provides selected results obtained during this research.