Problems associated with designing silencers are presented. Results of direct tests of silencers for cooperation with systems of axial fans, as well as results of numerical tests of a two stage acoustic silencer, are given. The numerical tests enabled determining the distribution of acoustic field inside the silencer and in the surrounding area. In those tests A sound insertion losses for different variants of installation inside the silencer, as well as for two different types of absorbing material used to fill the silencer walls, were determined. Impact of design features of silencers on effectiveness of noise reduction is described. Also, a technical sketch of a universal silencer with significant noise reduction (DipS = 39:1 dB) which can be successfully used in many ventilation systems is presented
Micro perforated panel (MPP) absorber is a new form of acoustic absorbing material in comparison with porous ones. These absorbers are considered as next generation ones and the best alternative for traditional porous materials like foams. MPP combined with a uniform air gap constructs an absorber which has high absorption but in a narrow bandwidth of frequency. This characteristic makes MPPAs insufficient for practical purposes in comparison with porous materials. In this study instead of using a uniform air gap behind the MPP, the cavity is divided into several partitions with different depth arrangement which have parallel faces. This method improves the absorption bandwidth to reach the looked for goal. To achieve theoretical absorption of this absorber, equivalent electro-acoustic circuit and Maa’s theory (Maa, 1998) are employed. Maa suggested formulas to calculate MPP’s impedance which show good match with experimental results carried out in previous studies. Electro-acoustic analogy is used to combine MPP’s impedance with acoustic impedances of complex partitioned cavity. To verify the theoretical analyses, constructed samples are experimentally tested via impedance tube. To establish the test, a multi-depth setup facing a MPP is inserted into impedance tube and the absorption coefficient is examined in the 63–1600 Hz frequency range. Theoretical results show good agreement compared to measured data, by which a conclusion can be made that partitioning the cavity behind MPP into different depths will improve absorption bandwidth and the electro-acoustic analogy is an appropriate theoretical method for absorption enhancement research, although an optimisation process is needed to achieve best results to prove the capability of this absorber. The optimisation process provides maximum possible absorption in a desired frequency range for a specified cavity configuration by giving the proper cavity depths. In this article numerical optimisation has been done to find cavity depths for a unique MPP.
Natural sounds are essential elements for ecosystems, and therefore necessary for many ecological functions, forming what is called “natural soundscapes”. The Natural Reserve Laguna del Portil (NRLP), located in the southwest of the Iberian Peninsula, is an ecosystem which was declared by Spanish authorities as Protected Natural Reserve. In the south area of the NRLP, there is a regional road with high traffic intensity, which affects the soundscapes of this natural reserve. In this study, the road potential noise impact on the natural sounds of the NLRP is analysed. This analysis was done both in winter and summer, and also using two independent methods: 1) spatial sampling measures in 43 different points of the NRL; and 2) noise mapping using noise levels prediction software. From the comparison of the results of both methods and seasons the following conclusions were reached: 1) an approach to the natural soundscape of NRLP both in winter and summer, 2) the acoustic impact of the road on the NRLP, and 3) the variation of the traffic noise depending on the distance to the road, and its seasonal variation. This study could be to improve the management of the NRLP and to help to preserve the natural soundscape of the reserve.
Surface Acoustic Wave (SAW) devices like delay lines, filters, resonators etc., are nowadays extensively used as principal solid state components in many electronic applications and chemical vapour sensors. To bring out the best from these SAW devices, computational design and modelling are resorted too. The present paper proposes the modelling of 400 MHz ST-X Quartz based SAW delay line, by three models namely, Impulse Response Model (IRM), Crossed-field Equivalent Circuit Model (ECM) and Couplingof- Modes (COM) model. MATLABr is employed as a computational tool to model the experimental output of the SAW device. A comparative discussion of the modelled device results is also provided.
The church of Santa Cruz de Oleiros, Spain (1967) shows architect Miguel Fisac’s perception of sacred space after the Second Vatican Council. In this place of worship, the architect responded to the new liturgical guidelines combining geometry and architectural forms with the material of the moment, concrete. However, ordinary religious celebrations reveal acoustic deficiencies for the main use of the building. This fact is corroborated by acoustic measurements in situ. With a methodology that uses simulation techniques for the sound field, the analysis of the current acoustic behaviour of the room will serve as the basis for an acoustic rehabilitation proposal aimed at improving the acoustic conditions and so, the functionality of the church.
In this paper an alternative procedure to vibro-acoustics study of beam-type structures is presented. With this procedure, it is possible to determine the resonant modes, the bending wave propagation velocity through the study of the radiated acoustic field and their temporal evolution in the frequency range selected. As regards the purely experimental aspect, it is worth noting that the exciter device is an actuator similar to is the one employed in distributed modes loudspeakers; the test signal used is a pseudo random sequence, in particular, an MLS (Maximum Length Sequence), facilitates post processing. The study case was applied to two beam-type structures made of a sandstone material called Bateig. The experimental results of the modal response and the bending propagation velocity are compared with well-established analytical solution: Euler-Bernoulli and Timoshenko models, and numerical models: Finite Element Method – FEM, showing a good agreement.
This paper proposes an active noise control (ANC) application to attenuate siren noise for the patient lying inside ambulance with no sound proofing. From the point of cost effectiveness, a local ANC system based on feedforward scheme is considered. Further, to handle the limitation of limited Zone of Silence (ZoS), the ANC based on virtual sensing is explored. The simulations are done in MATLAB for the recorded ambulance siren noise signal. The results indicate that ANC can be an effective solution for creating a silent environment for the patient.
The shipping noise near channels and ports is an important contribution to the ambient noise level, and the depth of these sites is often less than 100 m. However less attention has been paid to the measurement in shallow water environments (Brooker, Humphrey, 2016). This paper presents extensive measurements made on the URN (underwater radiated noise) of a small fishing boat in the South China Sea with 87 m depth. The URN data showed that the noise below 30 Hz was dominated by the background noise. The transmission loss (TL) was modelled with FEM (finite element method) and ray tracing according to the realistic environmental parameters in situ. The discrepancy between the modelled results and the results using simple law demonstrates both sea surface and bottom have significant effect on TL for the shallow water, especially at low frequencies. Inspired by the modelling methodology in AQUO (Achieve QUieter Oceans) project (Audoly et al., 2015), a predicted model applied to a typical fishing boat was built, which showed that the URN at frequencies below and above 100 Hz was dominated by non-cavitation propeller noise and mechanical noise, respectively. The agreement between predicted results and measured results also demonstrates that this modelling methodology is effective to some extent.
Speech emotion recognition is an important part of human-machine interaction studies. The acoustic analysis method is used for emotion recognition through speech. An emotion does not cause changes on all acoustic parameters. Rather, the acoustic parameters affected by emotion vary depending on the emotion type. In this context, the emotion-based variability of acoustic parameters is still a current field of study. The purpose of this study is to investigate the acoustic parameters that fear affects and the extent of their influence. For this purpose, various acoustic parameters were obtained from speech records containing fear and neutral emotions. The change according to the emotional states of these parameters was analyzed using statistical methods, and the parameters and the degree of influence that the fear emotion affected were determined. According to the results obtained, the majority of acoustic parameters that fear affects vary according to the used data. However, it has been demonstrated that formant frequencies, mel-frequency cepstral coefficients, and jitter parameters can define the fear emotion independent of the data used.
Ultrasonic pulse echo technique was used to study cupric oxide (CuO) thin films. CuO thin films were prepared using sol gel technique. They were doped with Lithium (Li) (1%, 2% and 4%). Thin films’ thickness (d) and band gap energy (Eg) were measured. In addition, elastic moduli (longitudinal (L), shear (G), bulk (K) and Young’s (E)) and Poisson’s ratio (v) were determined to estimate the microstructure properties of the prepared films. The study ameliorated the used transducers to overcome their dead zone and beam scattering; wedges were developed. The results showed the effectiveness of these wedges. They enhanced transducers’ sensitivity by changing the dead zone, beam diameter, beam directivity and waves’ transmission. Also, the study noted that Li doping caused the improvement of CuO thin films to be more useful in solar cell fabrication. Li-CuO thin films had narrower band gap. Thus, they acquired a high quantum yield for the excited carriers; also they gained more efficiency to absorb solar light.
The paper presents a comparative study of music features derived from audio recordings, i.e. the same music pieces but representing different music genres, excerpts performed by different musicians, and songs performed by a musician, whose style evolved over time. Firstly, the origin and the background of the division of music genres were shortly presented. Then, several objective parameters of an audio signal were recalled that have an easy interpretation in the context of perceptual relevance. Within the study parameter values were extracted from music excerpts, gathered and compared to determine to what extent they are similar within the songs of the same performer or samples representing the same piece.
Five models and methodology are discussed in this paper for constructing classifiers capable of recognizing in real time the type of fuel injected into a diesel engine cylinder to accuracy acceptable in practical technical applications. Experimental research was carried out on the dynamic engine test facility. The signal of in-cylinder and in-injection line pressure in an internal combustion engine powered by mineral fuel, biodiesel or blends of these two fuel types was evaluated using the vibro-acoustic method. Computational intelligence methods such as classification trees, particle swarm optimization and random forest were applied.
This paper proposes a comprehensive study on machine listening for localisation of snore sound excitation. Here we investigate the effects of varied frame sizes, and overlap of the analysed audio chunk for extracting low-level descriptors. In addition, we explore the performance of each kind of feature when it is fed into varied classifier models, including support vector machines, k-nearest neighbours, linear discriminant analysis, random forests, extreme learning machines, kernel-based extreme learning machines, multilayer perceptrons, and deep neural networks. Experimental results demonstrate that, wavelet packet transform energy can outperform most other features. A deep neural network trained with subband energy ratios reaches the highest performance achieving an unweighted average recall of 72.8% from four types for snoring.
Nowadays, resonators are widely used in automobile, industrial applications, aerospace engineering, and some other fields. One of the unique characteristics of resonators which made them highly convenient is their acoustic capability to attenuate noise without having to use any acoustic absorptive material. The device acts by manipulating the sound waves to create mismatch impedance. Recent studies also suggest that the typical bulk size resonator with narrow frequency bandwidth is not the only option anymore, since there are newly designed resonators that are capable of having wide attenuation bandwidth and are smaller in size. Numerical and experimental measures were executed accordingly with the same purpose to obtain efficient noise attenuation results from varying resonators’ and mufflers’ configuration in terms of quantity, types, and geometry. The aim of this review is to summarize recent developments on resonator study and to try highlighting some noteworthy issues that need to be unraveled by future research. Helmholtz resonator, Quarter wave tube, Herschel-Quincke tube and helicoidal resonator are part of the numerous resonator studies that will be covered in this paper.
To design breast ultrasound scanning systems or to test new imaging methods, various computer models are used to simulate the acoustic wave field propagation through a breast. The computer models vary in complexity depending on the applied approximations. The objective of this paper is to investigate how the applied approximations affect the resulting wave field. In particular, we investigate the importance of taking three-dimensional (3-D) spatial variations in the compressibility, volume density of mass, and attenuation into account. In addition, we compare four 3-D solution methods: a full-wave method, a Born approximation method, a parabolic approximation method, and a ray-based method. Results show that, for frequencies below 1 MHz, the amplitude of the fields scattering off the compressibility or density contrasts are at least 24 dB higher than the amplitude of the fields scattering off the attenuation contrasts. The results also show that considering only speed of sound as a contrast is a valid approximation. In addition, it is shown that the pressure field modeled with the full-wave method is more accurate than the fields modeled using the other three methods. Finally, the accuracy of the full-wave method is location independent whereas the accuracy of the other methods strongly depends on the point of observation.
Most of sound sources are complex vibroacoustic objects consist of numerous elements. Some coupled vibrating plates of different shapes and sizes can be easily found in urban environments. The main aim of this study is to determine the sound radiation of coupled plates system of practical importance. The investigated vibroacoustic system consist of a thin circular plate coupled with a thick flat baffle with a circular hole. The circular plate has been mounted to the baffle’s hole using screws and two steel rings. The measurement setup was located inside a semi-anechoic chamber to assure the free field conditions. It was necessary to take into account the whole system surface to obtain the radiation efficiency based on the Hashimoto’s method. Such an approach can be troublesome and time-consuming. Therefore, the criterion has been proposed which allows the vibration velocity measurements and calculations to be performed only for the thin plate’s area. An alternative approach has been proposed based on the classical Rayleigh integral formula. Its advantage is a simpler implementation in a computer code. The obtained results have been compared with the theoretical results obtained for the elastically supported circular plate. A good agreement has been obtained at low frequencies.
A questionnaire survey was conducted in the residential quarters of Guangzhou, for which 582 elderly people over 60 years old were randomly recruited. The hearing impairment of the participants was evaluated using the Hearing Handicap Inventory for the Elderly (HHIE), The participants’ subjective responses to the acoustical environment of their living place and the impact of the living acoustical environment (LAE) on the participants were investigated. The results show that the participants with a low HHIE score and no hearing impairment evaluated their LAE more favourably, and they considered that the effect of the LAE on their daily life was weak. However, those with a high HHIE score and severe hearing impairment evaluated their LAE poorly, and considered its effect on their daily lives to be significant. For the elderly, the worse the hearing is, the higher their demand for a better LAE. Traffic, construction, residential quarters, and noise from next door or upstairs neighbours were the main noise sources in the elderly’s living places, and traffic noise, construction noise, and noise from next door and upstairs were the most influential sources. 28.9% of the respondents had trouble hearing what their family said in their living place. The elderly without hearing impairment considered that continuous noise was the main reason that they could not hear what their family said in their living place, while those with hearing impairment believed that their own hearing problem was a contributing factor.
A new method for determining optimum dimension ratios for small rectangular rooms has been presented. In a theoretical model, an exact description of the room impulse response was used. Based on the impulse response, a frequency response of a room was calculated to find changes in the sound pressure level over the frequency range 20–200 Hz. These changes depend on the source and receiver positions, thus, a new metric equivalent to an average frequency response was introduced to quantify the overall sound pressure variation within the room for a selected source position. A numerical procedure was employed to seek a minimum value of the deviation of the sound pressure level response from a smooth fitted response determined by the quadratic polynomial regression. The most smooth frequency responses were obtained when the source was located at one of the eight corners of a room. Thus, to find the best possible dimension ratios, in the numerical procedure the optimal source position was assumed. Calculation results have shown that optimum dimension ratios depend on the room volume and the sound damping inside a room, and for small and medium volumes these ratios are roughly 1 : 1.48 : 2.12, 1 : 1.4 : 1.89 and 1 : 1.2 : 1.45. When the room volume was suitably large, the ratio 1 : 1.2 : 1.44 was found to be the best one.
The article presents the results concerning the use of clustering methods to identify signals of acoustic emission (AE) generated by partial discharge (PD) in oil-paper insulation. The conducted testing featured qualitative analysis of the following clustering methods: single linkage, complete linkage, average linkage, centroid linkage and Ward linkage. The purpose of the analysis was to search the tested series of AE signal measurements, deriving from three various PD forms, for elements of grouping (clusters), which are most similar to one another and maximally different than in other groups in terms of a specific feature or adopted criteria. Then, the conducted clustering was used as a basis for attempting to assess the effectiveness of identification of particular PD forms that modelled exemplary defects of the power transformer’s oil-paper insulation system. The relevant analyses and simulations were conducted using the Matlab estimation environment and the clustering procedures available in it. The conducted tests featured analyses of the results of the series of measurements of acoustic emissions generated by the basic PD forms, which were obtained in laboratory conditions using spark gap systems that modelled the defects of the power transformer’s oil-paper insulation.
IIn this short communication, we revise a correlation for the saturated liquid isothermal compressibility based on the data available in DIPPR (Postnikov, 2016) which considers the molecular non-sphericity and addresses a problem of predicting speeds of sound in saturated long-chained alkanes. In addition, we correct a misprint appeared in the cited work and provide programming code used for the realisation of the proposed calculations.