The Author discussed in his article the problem of ethic foundations of promoters of psychohistory. He argues that psychotherapeutic inclinations of scholars resulted in the alienation of this approach within historical sciences, what — in the end — did not prevent psychohistorians from becoming active outside the closed circle of the discipline.
The article is a contribution to the methodology of reading and interpreting Dostoevsky’s famous novels. It owes its genesis to the refl ection upon the evolution of literary theory discourse in XX century and upon transformations in global (mainly Russian and Western) reception and modes of interpreting the oeuvre of the great Russian artist. The aim of the text is to prepare ground for reorienting Polish “dostoevskology” from the dominant reconstructive course onto the more creative, interpretative one. The order of my inquiries presents itself as follows. In the fi rst part of the article I focus on the questions of ideas, the protagonist and narrative techniques in Dostoevsky so that to highlight the specifi city of the writer’s approach to these issues. It will allow me to speak up for the minimum of methodological awareness which implies acknowledgment of the paradigm of polyphony, polysemy and complexity of Dostoevsky’s text. Perhaps it will also become possible to reveal some gaps in the hitherto existing state of research, debunk several stereotypes still functioning in Polish “dostoevskology”, and draw attention to still unrecognized interpretative clues in context of those crucial aspects of Dostoevsky’s work. In the second part I will reconstruct several most popular approaches to Dostoevsky’s text which differ in terms of understanding of what the relation between the reader and the text should comprise of. I will try to determine the benefi ts they can bring but also to sensitize to pitfalls they may entail. In the fi nal, third part of the study I will propose a project of a new interpretative approach which would rise to the challenge of Dostoevsky’s “spirit” as well as the spirit of his text the way it is construed by the most advanced contemporary critical studies and as I have learnt to perceive it.
Previous onomastic research into proper names in the Internet has typically been based on traditional and classic onomastic methodology. As a result, researchers have focused on the classification of names, the analysis of their structure, etymology, or function. In this paper, this traditional approach is compared with the new possibilities afforded by medioonomastics, a fast growing method which is combining the onomastic tradition and mediolinguistics. This paper provides only an outline and is only preliminary, although some analysis is also presented. It reviews onomastic techniques and the medioonomastic analysis of the names that function within the various types of texts in the Internet. Some examples are taken from Internet memes, as well as from Facebook profiles. One of these names is the Polish given name, Janusz, which is a brilliant example of the specific new functions, connotations and general semantic values generated by the Internet. This name has gained a new meaning: ‘a typical Polish man’, ‘unfashionable man’, ‘a redneck’. Another name is the title of the Facebook profile Chujowa Pani Domu, based on the TV-series Perfekcyjna Pani Domu, as a kind of semantic and pragmatic re-construction of the latter name. In the conclusion, the necessity of considering not only the type of object-named, but also the medium and especially the Internet, is emphasized. Such studies may offer a correct procedure for analysis which include the new medioonomastic methodology.
The article presents relationship between history and management. Methodological inspirations between these disciplines have been shown and also the achievements carried out within the history of business and organizational theory have been described. The author has characterized the “historical turn” in organizational researches in the 1990s of XX century. In the subsequent part of the article, three methodological approaches have been characterized, namely: narrative research and storytelling, business history, and historical perspective in organizational research. The achievements of Polish researchers in the distinguished areas of research were taken into account. At the end, barriers to greater interest of using the historical perspective in the research of organizations, conducted by Polish researchers, have been presented. They are as follows: small share of historical knowledge in the education of management adepts, domination of a historical paradigms in organization and management research, the lack of continuity in the development of Polish organizations and scientific reflection on organizations and management in the 20th century and low historical awareness of Polish entrepreneurs and managers.
Marc Bloch — one of the most distinguished 20th Century historians – is the author of Strange Defeat: A Statement of Evidence Written in 1940. Serving as a staff offi cer, Bloch witnessed the fall of France in 1940 from the front line. This book is so interesting from the methodological point of view, because we are presented here with a historical source created by a historian, who additionally knows how an ideal type of historical evidence ought to be written. This French historian thought that history is also written to give contemporaries lessons on how to avoid the mistakes of the past. This is an important message of Strange Defeat.
The article discusses the issue of the increase of young researcher's self-awareness. Author points out that young scientists have no awareness of their ignorance. They have insufficient need of self-criticism. The thought „it is possible that I don’t know” is the condition of the increase of self-awareness and courage to be criticized.
The paper presents the methodology for designing the teeth conjunction of planetary gears in the planetary roller screw mechanism. A function of the planetary gears is to synchronize an operation of rollers in order to avoid axial displacements. A condition of the correct operation is no axial movement of rollers in relation to the nut. The planetary gears are integral parts of rollers and therefore an operation of the gear transmissions has a direct impact on cooperation of the screw, rollers and the nut. The proper design of gear engagements is essential for reducing slippage on surfaces of the cooperating threaded elements. For this purpose, in a designing method, both the limitations of operation and kinematic conditions of rollers’ operation have to be taken into account.
The phenolic compounds are known as priority pollutants, even in low concentrations, as a result of their toxicity and non-biodegradability. For this reason, strict standards have been established for them. In addition, chlorophenols are placed in the 38th to 43th in highest priority order of toxic pollutants. As a consequence, contaminated water or wastewaters with phenolic compounds have to be treated before discharging into the receiving water. In this study, Response Surface Methodology (RSM) has been used in order to optimize the effect of main operational variables responsible for the higher 4-chlorophenol removal by Activated Carbon-Supported Nanoscale Zero Valent Iron (AC/NZVI). A Box-Behnken factorial Design (BBD) with three levels was applied to optimize the initial concentration, time, pH, and adsorbent dose. The characterization of adsorbents was conducted by using SEM-EDS and XRD analyses. Furthermore, the adsorption isotherm and kinetics of 4-chlorophenol on AC and AC/NZVI under various conditions were studied. The model anticipated 100% removal efficiency for AC/NZVI at the optimum concentration (5.48 mg 4-chlorophenol/L), pH (5.44), contact time (44.7 min) and dose (0.65g/L). Analysis of the response surface quadratic model signified that the experiments are accurate and the model is highly significant. Moreover, the synthetic adsorbent is highly efficient in removing of 4-chlorophenol.
This research was conducted to study the adsorption of ammonium ions onto pumice as a natural and low-cost adsorbent. The physico-chemical properties of the pumice granular were characterized by X-ray diffraction (XRD), Fourier transforms infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Modeling and optimization of a NH4+ sorption process was accomplished by varying four independent parameters (pumice dosage, initial ammonium ion concentration, mixing rate and contact time) using a central composite design (CCD) under response surface methodology (RSM). The optimum conditions for maximum removal of NH4+ (70.3%) were found to be 100 g, 20 mg/l, 300 rpm and 180 min, for pumice dosage, initial NH4+ ion concentration, mixing rate and contact time. It was found that the NH4+ adsorption on the pumice granular was dependent on adsorbent dosage and initial ammonium ion concentration. NH4+ was increased due to decrease the initial concentration of NH4 and increase the contact time, mixing rate and amount of adsorbent.
Jesuits arrived in the land of the New Kingdom of Grande (Colombia) at the beginning of the 17th century. They founded colleges in all most important towns and began the mis-sionary service among Indians, according to the scheme of so-called ‘doctrinas’, i.e. villages inhabited by autochthons. During the years 1605-1660 they worked in a few doctrines on Altiplano in the surroundings of Bogota and Tunja and on eastern slopes of the Andes. Their service was usually very effective and carried out according to the established methodology of the missionary work. They were appealing to the following rules: systematic and regular religious education, knowledge of the local languages by missionaries, development of the educational system including study of the singing and the music, practising solemn liturgy based on solid and well equipped churches. The past experience of the work in ‘doctrinas’ was used in the second half of the 17th century during the establishment of Jesuits’ reductions in Casanare, Meta and Orinoko.
The article discusses Nicholas Rescher’s metaphilosophical view of orientational pluralism. In his essay Philosophical Disagreement: An Essay towards Orientational Pluralism in Metaphilosophy Rescher explains a substantial difference between philosophy and science—namely, that philosophers—differently than scientists— continuously propose and undermine various solutions to the same old problems. In philosophy it is difficult to find any consensus or convergence of theories. According to Rescher, this pluralism of theoretical positions is caused by holding by philosophers different sets and hierarchies of cognitive values, i.e. methodological orientations. These orientations are chosen in virtue of some practical postulates, they are of axiological, normative, but not strictly theoretical character. Different methodological orientations yield different evaluations of philosophical theses and arguments. This article shows that Rescher’s account does not determine clearly acceptable cognitive values. If there are no clear criteria of evaluation of methodological orientations, then the described view seems to be identical to relativism adopting the everything goes rule. In addition, accepting orientational pluralism it is hard to avoid the conclusion that discussions between various philosophical schools are futile or can be reduced to non-rational persuasion.
Investigating human emotions empirically is still considered to be challenging, mostly due to the questionable validity of the results obtained when employing individual types of measures. Among the most frequently used methods to study emotional reactions are self-report, autonomic, neurophysiological, and behavioral measures. Importantly, previous studies on emotional responding have rarely triangulated the aforementioned research methods. In this paper we discuss main methodological considerations related to the use of physiological and self-report measures in emotion studies, based on our previous research on the processing of emotionally-laden narratives in the native and non-native language, where we employed the SUPIN S30 questionnaire as a self-report tool, and galvanic skin response (GSR) as a physiological measure (Jankowiak & Korpal, 2018). The findings revealed a more pronounced reaction to stimuli presented in the native relative to the non-native language, which was however reflected only in GSR patterns. The lack of correlation between GSR and SUPIN scores might have resulted from a number of methodological considerations, such as social desirability bias, sensitive questions, lack of emotional self-awareness, compromised ecological validity, and laboratory anxiety, all of which are thoroughly discussed in the article.
In recent years, due to the growing importance of eco-design and tightening EU regulations entrepreneurs are required to implement activities related to environmental protection. It influences the development of methods and tools enabling the implementation of eco-design into practice, which are increasingly used by modern information technologies. They are based on intelligent solutions that allows them to better match the requirements of designers and allows for the automation of processes, and in some cases they are able to do the work themselves, replacing designers. Details are useful in areas that require calculations, comparisons and making choices, which is the process of eco-design. The paper describes methodology of pro-ecological product design oriented towards recycling, based on agent technology, enables the design of environmentally friendly products including recycling. The description of the methodology was preceded by a literature analysis on the characteristics of tools supporting eco-design and the process of its development was presented. The proposed methodology can be used at the design stage of devices to select the best product in terms of ecology. It is based on the original set of recycling indicators, used to evaluate the recycling of the product, ensure the ability to operate in a distributed design environment, and the use of data from various CAD systems, allows full automation of calculations and updates (without user participation).
The AISI 430 stainless steel with ferritic structure is a low cost material for replacing austenitic stainless steel because of its higher yield strength, higher ductility and also better polarisation resistance in harsh environments. The applications of AISI 430 stainless steel are limited due to insignificant ductility and some undesirable changes of magnetic properties of its weld area with different microstructures. In this research, a study has been done to explore the effects of parameters of laser welding process, namely, welding speed, laser lamping current, and pulse duration, on the coercivity of laser welded AISI 430 stainless steel. Vibrating sample magnetometery has been used used to measure the values of magnetic properties. Observation of microstructural changes and also texture analysis were implemented in order to elucidate the change mechanism of magnetic properties in the welded sections. The results indicated that the laser welded samples undergo a considerable change in magnetic properties. These changes were attributed to the significant grain growth which these grains are ideally oriented in the easiest direction of magnetization and also formation of some non-magnetic phases. The main effects of the above-mentioned factors and the interaction effects with other factors were evaluated quantitatively. The analysis considered the effect of lamping current (175-200 A), pulse duration (10-20 ms) and travel speed (2-10 mm/min) on the coercivity of laser welded samples.
The article presents the effect of rotational and travelling speed and down force on the spindle torque acting on the tool in Friction Stir Processing (FSP) process. The response surface methodology (RSM) was applied to find a dependence combining the spindle torque acting on the tool with the rotational speed, travelling speed and the down force. The linear and quadratic models with interaction between parameters were used. A better fitting was achieved for a quadratic model. The studies have shown that the increase in rotational speed causes a decrease in the torque while the increase in travelling speed and down force causes an increase in the torque. The tests were conducted on casting aluminium alloy AlSi9Mg. Metallography examination has revealed that the application of FSP process results in a decrease in the porosity in the modified material and microstructure refining in the stir zone. The segregation of Si and Fe elements was evident in the parent material, while in the friction stir processed area this distribution was significantly uniform.
Removal of mercury(II) (Hg(II)) from aqueous media by a new biosorbent was carried out. Natural Polyporus squamosus fungus, which according to the literature has not been used for the purpose of Hg(II) biosorption before, was utilized as a low-cost biosorbent, and the biosorption conditions were analyzed by response surface methodology (RSM). Medium parameters which were expected to affect the biosorption of Hg(II) were determined to be initial pH, initial Hg(II) concentration (Co), temperature (T (°C)), and contact time (min). All experiments were carried out in a batch system using 250 mL fl asks containing 100 mL solution with a magnetic stirrer. The Hg(II) concentrations remaining in fi ltration solutions after biosorption were analyzed using Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). Based on the RSM results, the optimal conditions were found to be 5.30, 47.39 mg/L, 20°C and 254.9 min for pH, Co, T (°C), and contact time, respectively. Under these optimal conditions, the maximum biosorbed amount and the biosorption yield were calculated to be 3.54 mg/g and 35.37%, respectively. This result was confi rmed by experiments. This result shows that Polyporus squamosus has a specifi c affi nity for Hg ions. Under optimal conditions, by increasing the amount of Polyporus squamosus used, it can be concluded that all Hg ions will be removed
In the article the author discusses peculiarities of three areas of psychologists’ professional activity: conducting scientific research, educating new generations of psychologists, and having a private practice. He particularly stresses the significance of empirical testability of theories for correct and ethical assessment practice (according to Evidence-Based Assessment standard) and therapeutic practice (according to Evidence-Based Practice in Psychology standard). The author also explores the cultural immersion of psychological activity.
This biographical dictionary includes 226 biograms of editors in chief journalists executive editors and co-workers that were also described as editors. It is based on research data as well as records in ecclesiastical and state archives, libraries and registry offices. The individual lives are presented in accordance with the customary biogram template.
This paper focuses on the radio direction finding (DF) in multipath environments. Based on the measurement results presented in the open literature, the authors analyse the influence of environment transmission properties on the spread of the signal reception angle. Parameters that define these properties are rms delay and angle spreads. For these parameters, the mutual relationship is determined. This relationship is the basis for assessment of the required number of bearings that minimize the influence of the environment on the accuracy of DF procedure. In the presented analysis, the statistical properties of the signal reception angle are approximated by the normal distribution. The number of bearings versus the rms delay spread is presented as the main objective of this paper. In addition, a methodology of the bearings’ spatial averaging that provides better estimation of the reception angle is shown.
Flowability of fine, highly cohesive calcium carbonate powder was improved using high energy mixing (dry coating) method consisting in coating of CaCO3 particles with a small amount of Aerosil nanoparticles in a planetary ball mill. As measures of flowability the angle of repose and compressibility index were used. As process variables the mixing speed, mixing time, and the amount of Aerosil and amount of isopropanol were chosen. To obtain optimal values of the process variables, a Response Surface Methodology (RSM) based on Central Composite Rotatable Design (CCRD) was applied. To match the RSM requirements it was necessary to perform a total of 31 experimental tests needed to complete mathematical model equations. The equations that are second-order response functions representing the angle of repose and compressibility index were expressed as functions of all the process variables. Predicted values of the responses were found to be in a good agreement with experimental values. The models were presented as 3-D response surface plots from which the optimal values of the process variables could be correctly assigned. The proposed, mechanochemical method of powder treatment coupled with response surface methodology is a new, effective approach to flowability of cohesive powder improvement and powder processing optimisation.
The wear behaviour of Cr3C2-25% NiCr laser alloyed nodular cast iron sample were analyzed using a pin-on-disc tribometer. The influence of sliding velocity, temperature and load on laser alloyed sample was focused and the microscopic images were used for metallurgical examination of the worn-out sites. Box-Behnken method was utilised to generate the mathematical model for the condition parameters. The Response Surface Methodology (RSM) based models are varied to analyse the process parameters interaction effects. Analysis of variance was used to analyse the developed model and the results showed that the laser alloyed sample leads to a minimum wear rate (0.6079×10–3 to 1.8570×10–3 mm3/m) and coefficient of friction (CoF) (0.43 to 0.53). From the test results, it was observed that the experimental results correlated well with the predicted results of the developed mathematical model.
The present investigation has been made to assess the influence of B4C reinforced with Ti-6Al-4V matrix prepared by powder metallurgy route. High energy ball milling was used to prepare the composites. Cylindrical preforms were prepared using suitable die set assembly. The green preforms were sintered in the muffle furnace at 900°C for 1 h. Further the preforms were cooled inside the furnace till the room temperature has attained. SEM with EDS mapping analysis was used to evaluate the morphology and elemental confirmation of the prepared composite. The density and hardness of the samples are determined using Archimedes principle and Rockwell hardness testing machine. The wear resistance of the samples was determined by employing a pin on disc apparatus. The hardness of the composites (Ti-6Al-4V /10B4C) was increased while comparing to the base material (Ti-6Al-4V) which is attributed to the presence of hard ceramic phase. Response Surface Methodology (RSM) five level central composite design approach was accustomed and it minimised the amount of experimental conditions and developed mathematical models among the key process parameters namely wt. % of B4C, applied load and sliding distances to forecast the abrasive response of Specific Wear Rate (SWR) and Coefficient of Friction (CoF). Analysis of variance was used to check the validity of the developed model. The optimum parameters of specific wear rate and coefficient of friction were identified.
The development of industry is determined by the use of modern materials in the production of parts and equipment. In recent years, there has been a significant increase in the use of nickel-based superalloys in the aerospace, energy and space industries. Due to their properties, these alloys belong to the group of materials hard-to-machine with conventional methods. One of the non-conventional manufacturing technologies that allow the machining of geometrically complex parts from nickel-based superalloys is electrical discharge machining. The article presents the results of experimental investigations of the impact of EDM parameters on the surfaces roughness and the material removal rate. Based on the results of empirical research, mathematical models of the EDM process were developed, which allow for the selection of the most favourable processing parameters for the expected values of the surface roughness Sa and the material removal rate.
The dry sliding wear behavior of heat-treated super duplex stainless steel AISI 2507 was examined by taking pin-on-disc type of wear-test rig. Independent parameters, namely applied load, sliding distance, and sliding speed, influence mainly the wear rate of super duplex stainless steel. The said material was heat treated to a temperature of 850°C for 1 hour followed by water quenching. The heat treatment was carried out to precipitate the secondary sigma phase formation. Experiments were conducted to study the influence of independent parameters set at three factor levels using the L27 orthogonal array of the Taguchi experimental design on the wear rate. Statistical significance of both individual and combined factor effects was determined for specific wear rate. Surface plots were drawn to explain the behavior of independent variables on the measured wear rate. Statistically, the models were validated using the analysis of variance test. Multiple non-linear regression equations were derived for wear rate expressed as non-linear functions of independent variables. Further, the prediction accuracy of the developed regression equation was tested with the actual experiments. The independent parameters responsible for the desired minimum wear rate were determined by using the desirability function approach. The worn-out surface characteristics obtained for the minimum wear rate was examined using the scanning electron microscope. The desired smooth surface was obtained for the determined optimal condition by desirability function approach.