TitleEffect of nanofluid concentration on two-phase thermosyphon heat exchanger performance
Journal titleArchives of Thermodynamics
Keywordstwo-phase thermosyphon ; heat exchanger ; nanofluid ; Wilson method
Divisions of PASNauki Techniczne
PublisherThe Committee on Thermodynamics and Combustion of the Polish Academy of Sciences
TypeArtykuły / Articles
IdentifierISSN 1231-0956 ; eISSN 2083-6023
ReferencesShokouhmand (2008), Experimental investigation of shel l and coiled tube heat exchangers using Wilson plots Heat Mass Tran, Int Comm, 35, 84. ; Khandekar (2008), Thermal performance of closed two - phase thermosyphon using nanofluids, Int J Therm Sci, 47, 659, doi.org/10.1016/j.ijthermalsci.2007.06.005 ; Shah (1990), Assessment of modified Wilson plot techniques for obtaining heat exchanger design data In th Heat Transfer Conf, Proc Int, 9, 51. ; Fernandez (2007), A general review of the Wilson plot method and its modifications to determine convection coefficients in heat exchange devices, Appl Therm Eng, 27, 2745, doi.org/10.1016/j.applthermaleng.2007.04.004 ; Pantzali (2009), Investigating the efficacy of nanofluids as coolants in plate heat exchanger, Chem Eng Sci, 64, 3290, doi.org/10.1016/j.ces.2009.04.004 ; Xue (2006), The interface effect of carbon nanotube suspension on the thermal performance of a two - phase closed thermosiphon, J Appl Phys, 100, 104909, doi.org/10.1063/1.2357705 ; Wilson (1915), A basis for rational design of heat transfer apparatus ASME, Trans, 37, 47. ; Incropera (2010), Fundamentals of Heat and Mass Transfer th, Edn, 6. ; van Rooyen (2012), Modified Wilson plots for enhanced heat transfer experiments : Current status and future perspectives Heat Tran, Eng, 33, 342, doi.org/10.1080/01457632.2012.611767 ; Noie (2009), Heat transfer enhancement using / water nanofluid in a two - phase closed thermosyphon Heat and Fluid Flow, Int J, 30, 700. ; Parametthanuwat (2010), A correlation to predict heattransfer rates of a two - phase closed thermosyphon using silver nanofluid at normal operating conditions, TPCT Int J Heat Mass Tran, 53, 4960, doi.org/10.1016/j.ijheatmasstransfer.2010.05.046 ; Cieśliński (2014), Pool boiling of nanofluids on rough and porous coated tubes : Experiment and correlation, Arch Thermodyn, 35, 3, doi.org/10.2478/aoter-2014-0010 ; Cooper (1984), Heat flow in saturated nucleate pool boiling - A wide - ranging examination using reduced properties Heat Tran, Adv, 16, 157. ; Cieśliński (2011), Pool boiling of water - and water - Cu nanofluids on horizontal smooth tubes Nanoscale, Res Lett, 6, 220, doi.org/10.1186/1556-276X-6-220-ISSN1556-276X ; Khodabandeh (2010), Heat transfer , flow regime and instability of a nano - and micro - porous structure evaporator in a two - phase thermosyphon loop, Int J Therm Sci, 49, 1183, doi.org/10.1016/j.ijthermalsci.2010.01.016 ; Briggs (1969), Modified Wilson plot techniques for obtaining heat transfer correlations for shell and tube heat exchangers, AIChE Symp Ser, 65, 35. ; Choi (1995), Enhancing thermal conductivity of fluids with nanoparticles Developments and applications of non - Newtonian flows ASME FED MD, Vol, 66, 231. ; Buschmann (2013), Nanofluids in thermosyphons and heat pipes : Overview of recent experiments and model ling approaches, Int J Therm Sci, 72, 1, doi.org/10.1016/j.ijthermalsci.2013.04.024 ; Murshed (2011), A review of boiling and convective heat transfer with nanofluids Sustainable Energ, Renew Rev, 15, 2342. ; He (2014), Effect of non - condensable gas on steady - state operation of a loop thermosyphon, Int J Therm Sci, 81, 59, doi.org/10.1016/j.ijthermalsci.2014.03.001 ; Gavotti (1999), Thermal control of electronic components by means of two - phase thermosyphons In No Single and Two - Phase Natural Circulation, Proc, 6, 229. ; Yang (2011), Application of functionalized nanofluid in thermosiphon Nanoscale http www nanoscalereslett com / content, Res Lett, 6, 494. ; Huminic (2011), Heat transfer characteristics of a two - phase closed thermosyphons using nanofluids, Exp Therm Fluid Sci, 35, 550, doi.org/10.1016/j.expthermflusci.2010.12.009 ; Huminic (2011), Experimental study of the thermal performance of thermosyphon heat pipe using iron oxide nanoparticles, Int J Heat Mass Tran, 54, 656, doi.org/10.1016/j.ijheatmasstransfer.2010.09.005 ; Cieśliński (2011), The effect of pressure on heat transfer during pool boiling of water - and water - Cu nanofluids on stainless steel smooth tube, Chem Process Eng, 32, 4, doi.org/10.2478/v10176-011-0026-2 ; Liu (2010), Influence of carbon nanotube suspension on the thermal performance of a miniature thermosiphon, Int J Heat Mass Tran, 53, 1914, doi.org/10.1016/j.ijheatmasstransfer.2009.12.065 ; Firouzfar (2011), Energy saving in HVAC systems using nanofluid, Appl Therm Eng, 31, 1543, doi.org/10.1016/j.applthermaleng.2011.01.029 ; Cieśliński (2013), Heat transfer characteristics of a two - phase thermosyphon, Appl Therm Eng, 51, 112, doi.org/10.1016/j.applthermaleng.2012.08.067 ; Mikielewicz (2008), Determination of heat transfer coefficient in evaporator of the ORC using the Wilson method In Heat Transfer and Renewable Sources of Energy Szczecin, Proc XVII Int Conf, 489. ; Bieliński (2016), Application of a two - phase thermosyphon loop with minichannels and a minipump in computer cooling, Arch Thermodyn, 37, 1, doi.org/10.1515/aoter-2016-0001 ; Zhang (2008), The experimental investigation on thermal performance of a flat two - phase thermosiphon, Int J Therm Sci, 47, 1195, doi.org/10.1016/j.ijthermalsci.2007.10.004 ; Kafeel (2014), Simulation of the response of a thermosyphon under pulsed heat input conditions, Int J Therm Sci, 80, 33, doi.org/10.1016/j.ijthermalsci.2014.01.020 ; Mehta (2007), Two - phase closed thermosyphon with nanofluids In th Heat Pipe Conf, Proc Int, 14, 22.