Details

Title

Selected studies of flow maldistribution in a minichannel plate heat exchanger

Journal title

Archives of Thermodynamics

Yearbook

2017

Issue

No 3

Authors

Keywords

pressure drop ; minichannel ; plate ; heat exchanger ; flow maldistribution ; channel blockage

Divisions of PAS

Nauki Techniczne

Coverage

135-148

Publisher

The Committee of Thermodynamics and Combustion of the Polish Academy of Sciences and The Institute of Fluid-Flow Machinery Polish Academy of Sciences

Date

2017

Type

Artykuły / Articles

Identifier

DOI: 10.1515/aoter-2017-0020

Source

Archives of Thermodynamics; 2017; No 3; 135-148

References

MikielewiczD (2016), Pressure drop of during flow condensation in minichannels, Int J Refrig, 7000, doi.org/10.1016/j.ijrefrig.2016.03.005 ; SturgisJ (1999), Assessment of CHF enhancement mechanisms in a curved rectangular channel subjected to concave heating Heat Transfer, null, 121. ; LaClairT (2000), Thermal transients in a capillary evaporator prior to the initiation of boiling, Int J Heat Mass Tran, 13, 3937, doi.org/10.1016/S0017-9310(00)00042-9 ; ReddyS (null), of systems thermal management and efficiency with single phase cooling, review Int J Heat Mass Tran, 14, 2015, doi.org/10.1016/j.ijheatmasstransfer.2015.07.134 ; NielsenK (2012), Degradation of the performance of microchannel heat exchangers due to flow maldistribution, Appl Therm Eng, 236, doi.org/10.1016/j.applthermaleng.2012.02.019 ; MikielewiczD (2013), Flow boiling intensification in minichannels by means of mechanical flow turbulising inserts, Int J Therm Sci, 79, doi.org/10.1016/j.ijthermalsci.2012.10.002 ; MikielewiczD (2008), study of flow boiling heat transfer in minichannels, Arch, 29, 73. ; LalotS (1999), Flow maldistribution in heat exchangers, Appl Therm Eng, 19, 847. ; TuckermanD (1981), performance heat sinking for Device, VLSI IEEE, 126, doi.org/10.1109/EDL.1981.253672 ; OrnatskiiA (1965), Heat transfer crisis in a forced flow of under - heated water in small - bore tubes Temp, null, 441. ; TuoH (2013), Effect of the header pressure drop induced flow maldistribution on the microchannel evaporator performance, Int J Refrig, 31, 2176. ; TengJ (2012), in, Fluid Dynamics, 403, doi.org/10.1002/97835276314453 ; MudawarI (2011), Two - phase microchannel heat sinks theory applications limitations, Electron, 11, 133. ; Ramos (2011), CFD study of liquid - cooled heat sinks with microchannel flow field configurations for electronics cells and concentrated solar cells, fuel Appl Therm Eng, 25, 2494, doi.org/10.1016/j.applthermaleng.2011.04.015 ; BassiounyM (1984), Flow distribution and pressure drop in plate heat exchangers - II type arrangement, Chem Eng Sci, 27, 39, doi.org/10.1016/0009-2509(84)80177-3 ; MudawarI (1985), Boiling heat transfer and critical heat flux in high - speed rotating liquid films, Int J Heat Mass Tran, 28, 795, doi.org/10.1016/0017-9310(85)90230-3 ; MinqiangP (2009), CFD - based study of velocity distribution among multiple parallel microchannels, Comput, 11, 1133, doi.org/10.4304/jcp.4.11.1133-1138 ; WangJ (2011), Theory of flow distribution in manifolds, Chem Eng J, 22, 168, doi.org/10.1016/j.cej.2011.02.050 ; MehendaleS (2000), Fluid flow and heat transfer at micro - and meso - scales with application to heat exchanger design, Appl Mech Rev, 53. ; KandlikarS (2005), High flux heat removal with microchannels A roadmap of challenges and opportunities Transfer, Heat Eng, 19, 5, doi.org/10.1080/01457630591003655 ; HuangL (2014), computational fluid dynamics and effectiveness - NTU based co - simulation approach for flow mal - distribution analysis in microchannel heat exchanger headers, Appl Therm Eng, 447, doi.org/10.1016/j.applthermaleng.2014.01.046 ; WenJ (2004), Study of flow distribution and its improvement on the header of plate - fin heat exchanger, Cryogenics, 21, 823, doi.org/10.1016/j.cryogenics.2004.04.009 ; BejanA (1997), Deterministic tree networks for fluid flow : geometry for minimal flow resistance between a volume and one point, Fractals, 24, 685, doi.org/10.1142/S0218348X97000553 ; AcrivosA (1959), Flow distributions in manifolds, Chem Eng Sci, 29, 112. ; ZhangZ (2003), CFD simulation on inlet configuration of plate - fin heat exchangers, Cryogenics, 12, 673, doi.org/10.1016/S0011-2275(03)00179-6 ; ManojSivaV (2014), DasS Effect of flow maldistribution on the thermal performance of parallel microchannel cooling systems, Int J Heat Mass Tran, 73, doi.org/10.1016/j.ijheatmasstransfer.2014.02.017 ; MudawarI (2001), Assessment of high - heat - flux thermal management schemes, IEEE Trans Technol, 24, 122. ; MuellerA (1988), of various types of flow maldistribution in heat exchangers Heat, Review Eng, 20, 36, doi.org/10.1080/01457638808939664 ; MudawarI (2009), Two - phase spray cooling of hybrid vehicle Components, electronics IEEE Trans Technol, 15, 501, doi.org/10.1109/TCAPT.2008.2006907 ; HallD (1999), Ultra - high critical heat flux for subcooled water flow boiling II high - CHF database and design equations, Int J Heat Mass Transf, 1429. ; Manag (null), Numerical investigations on characteristics of methane catalytic combustion in micro - channels with a concave or convex wall cavity, Energy Convers, 16, 2015, doi.org/10.1016/j.enconman.2015.03.058 ; WangJ (2001), Analytical solution of flow coefficients for a uniformly distributed porous channel, Chem Eng J, 30, 1, doi.org/10.1016/S1385-8947(00)00263-1 ; BajuraR (1971), model for flow distribution in manifolds, Eng Power, 28, 1. ; AmadorC (2004), Flow distribution in different microreactor scale - out geometries and the effect of manufacturing tolerances and channel blockage, Chem Eng J, 23, 101, doi.org/10.1016/j.cej.2003.11.031 ; BassiounyM (1984), Flow distribution and pressure drop in plate heat exchangers type arrangement, Chem Eng Sci, 26, 39, doi.org/10.1016/0009-2509(84)80176-1 ; MikielewiczD (2010), thermodynamic criterion for selection of working fluid for subcritical and supercritical domestic micro, Appl Therm Eng, 9, 2357, doi.org/10.1016/j.applthermaleng.2010.05.035 ; KumaranR (2011), KumaraguruparanG numerical and experimental investigation of flow maldistribution in a microchannel heat sink, Int Commun Heat Mass, 37, 1349. ; KimS (2014), of databases and predictive methods for heat transfer in condensing and boiling mini / micro - channel flows, Review Int J Heat Mass Tran, 18, 77, doi.org/10.1016/j.ijheatmasstransfer.2014.05.036 ; AnbumeenakshiC (2016), Experimental investigation of header shape and inlet configuration on flow maldistribution in microchannel, Exp Therm Fluid Sci, 39, doi.org/10.1016/j.expthermflusci.2016.02.004 ; JimenezP (1994), multi - kilowatt immersion - cooled standard electronic clamshell module for future aircraft avionics, Electron, 12, 116. ; KandlikarS (2003), of microchannel flow passages - thermohydraulic performance and fabrication technology Heat, Evolution Eng, 24, 1, doi.org/10.1080/014576303040405 ; BerthierJ (null), Whole blood spontaneous capillary flow in narrow groove microchannels, Sensors Chem, 17, 206, doi.org/10.1016/j.snb.2014.09.040

Editorial Board

International Advisory Board

J. Bataille, Ecole Central de Lyon, Ecully, France

A. Bejan, Duke University, Durham, USA

W. Blasiak, Royal Institute of Technology, Stockholm, Sweden

G. P. Celata, ENEA, Rome, Italy

L.M. Cheng, Zhejiang University, Hangzhou, China

M. Colaco, Federal University of Rio de Janeiro, Brazil

J. M. Delhaye, CEA, Grenoble, France

M. Giot, Université Catholique de Louvain, Belgium

K. Hooman, University of Queensland, Australia

D. Jackson, University of Manchester, UK

D.F. Li, Kunming University of Science and Technology, Kunming, China

K. Kuwagi, Okayama University of Science, Japan

J. P. Meyer, University of Pretoria, South Africa

S. Michaelides, Texas Christian University, Fort Worth Texas, USA

M. Moran, Ohio State University, Columbus, USA

W. Muschik, Technische Universität Berlin, Germany

I. Müller, Technische Universität Berlin, Germany

H. Nakayama, Japanese Atomic Energy Agency, Japan

A. Nenarokomov, Moscow Aviation Institute, Russia

S. Nizetic, University of Split, Croatia

H. Orlande, Federal University of Rio de Janeiro, Brazil

M. Podowski, Rensselaer Polytechnic Institute, Troy, USA

A. Rusanov, Institute for Mechanical Engineering Problems NAS, Kharkiv, Ukraine

M. R. von Spakovsky, Virginia Polytechnic Institute and State University, Blacksburg, USA

A. Vallati, Sapienza University of Rome, Italy

H.R. Yang, Tsinghua University, Beijing, China



×