Nauki Techniczne

Archives of Control Sciences

Zawartość

Archives of Control Sciences | 2017 | No 4

Abstrakt

Abstract In the paper construction of a Lyapunov functional for time delay system with both lumped and distributed delay is presented. The Lyapunov functional is determined by means of the Lyapunov matrix. The method of determination of the Lyapunov matrix for time delay system with both lumped and distributed delay is presented. It is given the example illustrating the method.
Przejdź do artykułu

Autorzy i Afiliacje

Jozef Duda

Abstrakt

Abstract This research work proposes a new three-dimensional chaotic system with a hidden attractor. The proposed chaotic system consists of only two quadratic nonlinearities and the system possesses no critical points. The phase portraits and basic qualitative properties of the new chaotic system such as Lyapunov exponents and Lyapunov dimension have been described in detail. Finally, we give some engineering applications of the new chaotic system like circuit simulation and control of wireless mobile robot.
Przejdź do artykułu

Autorzy i Afiliacje

Sundarapandian Vaidyanathan
Aceng Sambas
Mustafa Mamat
Mada Sanjaya Ws

Abstrakt

Abstract This paper investigates the problem of adaptive robust simultaneous stabilization (ARSS) of two dissipative Hamiltonian systems (DHSs), and proposes a number of results on the controller parameterization design. Firstly, an adaptive H∞ control design approach is presented by using the dissipative Hamiltonian structural for the case that there are both external disturbances and parametric uncertainties in two DHSs. Secondly, an algorithm for solving tuning parameters of the controller is proposed using symbolic computation. The proposed controller parameterization method avoids solving Hamilton-Jacobi-Issacs (HJI) equations and the obtained controller is easier as compared to some existing ones. Finally, an illustrative example is presented to show that the ARSS controller obtained in this paper works very well.
Przejdź do artykułu

Autorzy i Afiliacje

Zhong Cao
Xiaorong Hou
Wenjing Zhao

Abstrakt

Abstract Offset-free model predictive control (MPC) algorithms for nonlinear state-space process models, with modeling errors and under asymptotically constant external disturbances, is the subject of the paper. The main result of the paper is the presentation of a novel technique based on constant state disturbance prediction. It was introduced originally by the author for linear state-space models and is generalized to the nonlinear case in the paper. First the case with measured state is considered, in this case the technique allows to avoid disturbance estimation at all. For the cases with process outputs measured only and thus the necessity of state estimation, the technique allows the process state estimation only - as opposed to conventional approach of extended process-and-disturbance state estimation. This leads to simpler design with state observer/filter of lower order and, moreover, without the need of a decision of disturbance placement in the model (under certain restrictions), as in the conventional approach. A theoretical analysis of the proposed algorithm is provided, under applicability conditions which are weaker than in the conventional approach. The presented theory is illustrated by simulation results of nonlinear processes, showing competitiveness of the proposed algorithms.
Przejdź do artykułu

Autorzy i Afiliacje

Piotr Tatjewski

Abstrakt

Abstract This paper presents the dynamically consistent Jacobian inverse for non-holonomic robotic system, and its application to solving the motion planning problem. The system’s kinematics are represented by a driftless control system, and defined in terms of its input-output map in accordance with the endogenous configuration space approach. The dynamically consistent Jacobian inverse (DCJI) has been introduced by means of a Riemannian metric in the endogenous configuration space, exploiting the reduced inertia matrix of the system’s dynamics. The consistency condition is formulated as the commutativity property of a diagram of maps. Singular configurations of DCJI are studied, and shown to coincide with the kinematic singularities. A parametric form of DCJI is derived, and used for solving example motion planning problems for the trident snake mobile robot. Some advantages in performance of DCJI in comparison to the Jacobian pseudoinverse are discovered.
Przejdź do artykułu

Autorzy i Afiliacje

Joanna Ratajczak
Krzysztof Tchoń

Abstrakt

Abstract This article presents a control algorithm for nonholonomic mobile manipulators with a simple, geometric holonomic constraint imposed on the robot’s arm. A mathematical model in generalized, auxiliary and linearized coordinates is presented, as well as the constrained dynamics of the robotic system. A position-force control law is proposed, both for the fully known robot’s model, as well as for the model with parametric uncertainty in the dynamics. Theoretical considerations are supported by the results of computer simulations.
Przejdź do artykułu

Autorzy i Afiliacje

Mirela Kaczmarek
Wojciech Domski
Alicja Mazur

Abstrakt

Abstract The paper mitigates the existing conditions reported in the previous literature for control design of discrete-time linear positive systems. Incorporating an associated structure of linear matrix inequalities, combined with the Lyapunov inequality guaranteing asymptotic stability of discrete-time positive system structures, new conditions are presented with which the state-feedback controllers and the system state observers can be designed. Associated solutions of the proposed design conditions are illustrated by numerical illustrative examples.
Przejdź do artykułu

Autorzy i Afiliacje

Dušan Krokavec
Anna Filasová

Instrukcja dla autorów

Each paper submitted is subject to a review procedure, and the publication decision is based on reviers' comments on the paper. To avoid delay, please prepare the manuscript carefully following the suggestions listed below.

Computer file of the manuscript may be sent by e-mail to the address of Assistant Editor or acs@polsl.pl. Preferred text processors is TeX or LaTeX, however Word and other processors are also acceptable. In case of difficulties in processing the text, the author may be asked to supply the ASCII export of the original file.

Manuscripts sent via ordinary post should be typewritten double-spaced on one side of a standard size (A4) paper. Left side margin should be approximately 3cm (1.2'') wide. Each page should contain approximately 30 lines of 60 characters each. The manuscript including figures and tables together with their captions should be submitted. A separate signed letter giving the Author's preferred address for correspondence and return of proofs should be enclosed. Manuscript is the basis for editorial work.

First page should include the title of the paper, first name(s) and surname(s) of the Author(s), and a short summary (abstract), not longer than 20 lines.

Keywords of max. 5 - 7 items should be included in manuscript.

Numeration. All chapters, including the introduction, should be numbered in arabic numerals. Equations, tables and figures as well as theorems, corollaries, examples etc., should be numbered consecutively throughout the paper in arabic numerals, except in appendices. Appendices should be numbered with capital letters, and numeration should be closed within individual appendices.

If the manuscript is not prepared with TeX, mathematical expressions should be carefully written so as not to arouse confusion. Care should be taken that subscripts and superscripts are easily readable.

Tables and figures should be placed as desired by the Author within the text or on separate sheets with their suggested location indicated by the number of table or figure in the text. Figures, graphs and pictures (referred to as Fig. in the manuscript) should be numbered at the beginning of their caption following the figure. All figures should be prepared as PostScript EPS files or LaTeX picture files; in special cases, bitmaps of figure are also acceptable. The numbers and titles of tables should be placed above the main body of each table.

References should be listed alphabetically at the end of the manuscript. They should be numbered in ascending order and the numbers should be inserted in square brackets. References should be organized as follows. First initial(s), surname(s) of the author(s) and title of article or book. Then, for papers: title of periodical or collective work, volume number (year of issue), issue number, and numbers of the first and the last page; for books: publisher's name(s), place and year of issue. Example:

  1. R. E. Kalman: Mathematical description of linear dynamical system. SIAM J. Control. 1(2), (1963), 152-192.
  2. F. C. Shweppe: Uncertain dynamic systems. Prentice-Hall, Englewood Cliffs, N.J. 1970.


Please, give full titles of journals; only common words like Journal, Proceedings, Conference, etc. may be abbreviated ( to J., Proc., Conf., ... respectively). References to publications in the body of the manuscript should be indicated by the numbers of the adequate references in square brackets. When the paper is set in TeX the preferable form of preparing references is Bib TeX bib database.

Footnotes should be placed in the manuscript, beginning with "Received..." (date to be filled in by Editor), the author's institutional affiliation and acknowledgement of financial support,

Ta strona wykorzystuje pliki 'cookies'. Więcej informacji