TY - JOUR N2 - Improvement of Al-Si alloys properties in scope of classic method is connected with change of Si precipitations morphology through: using modification of the alloy, maintaining suitable temperature of overheating and pouring process, as well as perfection of heat treatment methods. Growing requirements of the market make it necessary to search after such procedures, which would quickly deliver positive results with simultaneous consideration of economic aspects. Presented in the paper shortened heat treatment with soaking of the alloy at temperature near temperature of solidus could be assumed as the method in the above mentioned understanding of the problem. Such treatment consists in soaking of the alloy to temperature of solutioning, keeping in such temperature, and next, quick quenching in water (20 0 C) followed by artificial ageing. Temperature ranges of solutioning and ageing treatments implemented in the adopted testing plan were based on analysis of recorded curves from the ATD method. Obtained results relate to dependencies and spatial diagrams describing effect of parameters of the solutioning and ageing treatments on HB hardness of the investigated alloy and change of its microstructure. Performed shortened heat treatment results in precipitation hardening of the investigated 320.0 alloy, what according to expectations produces increased hardness of the material. L1 - http://www.czasopisma.pan.pl/Content/87957/PDF/06_paper.pdf L2 - http://www.czasopisma.pan.pl/Content/87957 PY - 2014 IS - No 2 DO - 10.2478/afe-2014-0031 KW - Aluminum alloys KW - ATD KW - heat treatment KW - HB hardness A1 - Pezda, J. PB - The Katowice Branch of the Polish Academy of Sciences DA - 2014 T1 - Effect of Shortened Heat Treatment on the Hardness and Microstructure of 320.0 Aluminium Alloy UR - http://www.czasopisma.pan.pl/dlibra/publication/edition/87957 T2 - Archives of Foundry Engineering ER -