TY - JOUR N2 - The current work presents the research results of abrasion wear and adhesive wear at rubbing and liquid friction of new austenitic, austenitic-ferritic (“duplex”) cast steel and gray cast iron EN-GJL-250, spheroidal graphite iron EN-GJS-600-3, pearlitic with ledeburitic carbides and spheroidal graphite iron with ledeburitic carbides with a microstructure of the metal matrix: pearlitic, upper bainite, mixture of upper and lower bainite, martensitic with austenite, pearlitic-martensitic-bainitic-ausferritic obtained in the raw state. The wearing quality test was carried out on a specially designed and made bench. Resistance to abrasion wear was tested using sand paper P40. Resistance to adhesive wear was tested in interaction with steel C55 normalized, hardened and sulfonitrided. The liquid friction was obtained using CASTROL oil. It was stated that austenitic cast steel and “duplex” are characterized by a similar value of abrasion wear and adhesive wear at rubbing friction. The smallest decrease in mass was shown by the cast steel in interaction with the sulfonitrided steel C55. Austenitic cast steel and “duplex” in different combinations of friction pairs have a higher wear quality than gray cast iron EN-GJL250 and spheroidal graphite iron EN-GJS-600-3. Austenitic cast steel and “duplex” are characterized by a lower wearing quality than the spheroidal graphite iron with bainitic-martensitic microstructure. In the adhesive wear test using CASTROL oil the tested cast steels and cast irons showed a small mass decrease within the range of 1÷2 mg. L1 - http://www.czasopisma.pan.pl/Content/86830/PDF/42_paper.pdf L2 - http://www.czasopisma.pan.pl/Content/86830 PY - 2012 IS - No 2 DO - 10.2478/v10266-012-0067-0 KW - New Materials and Technologies KW - Austenitic Cast Steel KW - “Duplex” Cast Iron KW - Abrasion Wear KW - Adhesive Wear A1 - Pietrowski, S. PB - The Katowice Branch of the Polish Academy of Sciences DA - 2012 T1 - Wearing Quality of Austenitic, Duplex Cast Steel, Gray and Spheroidal Graphite Iron UR - http://www.czasopisma.pan.pl/dlibra/publication/edition/86830 T2 - Archives of Foundry Engineering ER -