TY - JOUR N2 - In the paper, we demonstrate the feasibility of interdigital electrodes fabrication with the usage of inkjet printing technology. The emphasis was put to obtain better shape quality and lower spacing between electrodes with respect to typical printing process. The paper presents an analysis of the main factors that have an influence on the dimension and quality of printed structures and proposes two methods that allow eliminating the main problems. The first proposed method is based on controlling the time between patterning of successive drops. While the second method is based on changing the design methods considering printing orientation. Both methods do not require any additional technological processes or the use of any special surface preparation methods. Finally, the obtained results and conclusions were presented and discussed. L1 - http://www.czasopisma.pan.pl/Content/118194/PDF/107_3018_Tarapata_skl_NEW.pdf L2 - http://www.czasopisma.pan.pl/Content/118194 PY - 2020 IS - No 4 EP - 799 DO - 10.24425/ijet.2020.135205 KW - technology KW - inkjet printing KW - resolution KW - design method KW - interdigital electrodes A1 - Marzęcki, Michał A1 - Tarapata, Grzegorz PB - Polish Academy of Sciences Committee of Electronics and Telecommunications VL - vol. 66 DA - 2020.12.02 T1 - Low Cost Design Methods to Enhance Resolution and Dimensions for Printed Electrodes SP - 793 UR - http://www.czasopisma.pan.pl/dlibra/publication/edition/118194 T2 - International Journal of Electronics and Telecommunications ER -