TY - JOUR N2 - There are presents the internal recycling in anode furnace, in addition to mainly blister copper and converter copper. During the process there arise the two types of semi-finished products intended for further pyro metallurgical processing: anode copper and anode slag. The stream of liquid blister copper enters into the anode furnace treatment, in which the losses are recovered, e.g. copper, resulting from oxidation and reduction of sulfides, oxides and the oxidation of metallic compounds of lead, zinc and iron. In the liquid phase there are still gaseous states, which gives the inverse relationship relating to the solid phase, wherein the gases found an outlet in waste gas or steam. The results of chemical analysis apparently differ from each other, because crystallite placement, the matrix structure and the presence of other phases and earth elements are not compared, which can be regained in the process of electrorefining. One should not interpret negatively smaller proportion of copper in the alloy, since during the later part of the production more elements can be obtained, for example from sludge, such as platinum group metals and lanthanides. According to the research the quality of blister copper, to a large extent, present in the alloy phase to many other elements, which can be recovered. L1 - http://www.czasopisma.pan.pl/Content/101999/PDF/afe-2017-0042.pdf L2 - http://www.czasopisma.pan.pl/Content/101999 PY - 2017 IS - No 2 DO - 10.1515/afe-2017-0042 KW - recycling KW - Slag KW - Copper recovery A1 - Bydałek, A.W. A1 - Schlafka, P. A1 - Grządko, K. A1 - Wołczyński, W. A1 - Kwapisiński, P. A1 - Wędrychowicz, M. PB - The Katowice Branch of the Polish Academy of Sciences VL - vol. 17 DA - 2017 T1 - Structural Analysis of the Selected Products From the Suspension Furnace Produced in the Internal Recycling UR - http://www.czasopisma.pan.pl/dlibra/publication/edition/101999 T2 - Archives of Foundry Engineering ER -