TY - JOUR N2 - The results of researches of sorption processes of surface layers of components of sand moulds covered by protective coatings are presented in the hereby paper. Investigations comprised various types of sand grains of moulding sands with furan resin: silica sand, reclaimed sand and calcined in temperature of 700oC silica sand. Two kinds of alcoholic protective coatings were used – zirconium and zirconium – graphite. Tests were performed under condition of a constant temperature within the range 30 – 35oC and high relative air humidity 75 - 80%. To analyze the role of sand grains in sorption processes quantitavie moisture sorption with use of gravimetric method and ultrasonic method were used in measurements. The tendency to moisture sorption of surface layers of sand moulds according to the different kinds of sand grains was specified. The effectiveness of protective action of coatings from moisture sorption was analyzed as well. Knowledge of the role of sand grains from the viewpoint of capacity for moisture sorption is important due to the surface casting defects occurrence. In particular, that are defects of a gaseous origin caused by too high moisture content of moulds, especially in surface layers. L1 - http://www.czasopisma.pan.pl/Content/101973/PDF/afe-2017-0016.pdf L2 - http://www.czasopisma.pan.pl/Content/101973 PY - 2017 IS - No 1 DO - 10.1515/afe-2017-0016 KW - Castings defects KW - Moisture sorption KW - Surface layer KW - Furan moulding sands KW - Sand grains A1 - Kaźnica, N. A1 - Zych, J. PB - The Katowice Branch of the Polish Academy of Sciences VL - vol. 17 DA - 2017 T1 - Role of Sand Grains in Sorption Processes by Surface Layers of Components of Sand Moulds UR - http://www.czasopisma.pan.pl/dlibra/publication/edition/101973 T2 - Archives of Foundry Engineering ER -