@ARTICLE{Jaromin_M._Influence_2019, author={Jaromin, M. and Dojka, R. and Jezierski, J. and Dojka, M.}, volume={vol. 19}, number={No 1}, journal={Archives of Foundry Engineering}, pages={35-40}, howpublished={online}, year={2019}, publisher={The Katowice Branch of the Polish Academy of Sciences}, abstract={The article is a case study of the steel milling ring casting of about 6 tonnes net weight. The casting has been cast in the steel foundry the authors have been cooperating with. The aim was to analyse the influence of the shape of the chills and the material which was used to make them on the casting crystallization process. To optimally design the chills the set of the computer simulation has been carried out with 3 chills’ shape versions and 3 material’s versions and the results have been compared with the technology being in use (no chills). The proposed chills were of different thermal conductivity from low to high. Their shapes were obviously dependant on the adjacent casting surface geometry but were the result of the attempt to optimise their effect with the minimum weight, too. The chills working efficiency was analysed jointly with the previously designed top feeders system. The following parameters have been chosen to compare their effectiveness and the crystallization process: time to complete solidification and so-called fed volume describing the casting feeding efficiency. The computer simulations have been carried out with use of MagmaSoft v. 5.2 software. Finally, the optimisation has led to 15% better steel yield thanks to 60% top feeders weight reduction and 40% shorter solidification time. The steel ring cast with use of such technology fulfil all quality criteria.}, type={Ahead of print}, title={Influence of Type and Shape of the Chillon Solidification Process of Steel Casting}, URL={http://www.czasopisma.pan.pl/Content/109228/PDF/AFE%201_2019_06.pdf}, doi={10.24425/afe.2018.125188}, keywords={solidification process, Crystallization process, computer simulation, steel castings, chill}, }