@ARTICLE{Li_Yukun_Modification_2018, author={Li Yukun and Du Xiaodong and Fu Junwei and Zhang Ya and Zhang Zhen and Zhou Shiang and Yucheng Wu}, volume={vol.18}, number={No 2}, journal={Archives of Foundry Engineering}, howpublished={online}, year={2018}, publisher={The Katowice Branch of the Polish Academy of Sciences}, abstract={In this study, the modification mechanism and growth process of Al3(Sc, Zr) particles in as-cast Al-Si-Mg-Cu based alloy with addition of Sc and Zr were systematically investigated. It was found that 0.57 wt-%Sc addition caused a significant refinement in the average grain size of the investigated alloy, which brought about a remarkable transformation in as-cast microstructure, from thick dendritic shape to fine equiaxed structure. A large amount of primary Al3(Sc, Zr) particles with the dimension of around 5-6 μm were also observed within the equiaxed grain. Due to the identical orientation and similar crystal structure between primary Al3(Sc, Zr) particles and α-Al matrix, the primary particles always served as heterogeneous nucleus for the α-Al matrix. In addition, these cusped cubic primary Al3(Sc, Zr) particles showed triangle, star, rhomboid morphologies are generated from sectioning the particle in (111), (100) and (110) planes, respectively. Particularly, the typical eutectic structure which contained odd number-layer (Al3(Sc, Zr)+α-Al+  +Al3(Sc, Zr)) was observed within the investigated particles.}, type={Ahead of print}, title={Modification Mechanism and Growth Process of Al3 (Sc, Zr) Particles in As-cast Al-Si-Mg-Cu-Zr-Sc Alloy}, URL={http://www.czasopisma.pan.pl/Content/106779/PDF/AFE%202_2018_10.pdf}, doi={10.24425/122502}, keywords={solidification process, metallography, Al3(Sc, Zr), three-dimensional morphology, eutectic growth}, }