@ARTICLE{Jamrozowicz_Ł._Influence_2018, author={Jamrozowicz, Ł. and Kolczyk, J. and Wojtuń, P.}, volume={vol.18}, number={No 1}, journal={Archives of Foundry Engineering}, howpublished={online}, year={2018}, publisher={The Katowice Branch of the Polish Academy of Sciences}, abstract={Measurements of the hardening process course of the selected self-hardening moulding sands with the reclaimed material additions to the matrix, are presented in the hereby paper. Moulding sands were produced on the „Szczakowa” sand (of the Sibelco Company) as the matrix of the main fraction FG 0,40/0,32/0,20, while the reclaim was added to it in amounts of 20, 50 and 70%. Regeneration was performed with a horizontal mechanical regenerator capacity of 10 t/h. In addition, two moulding sands, one on the fresh sand matrix another on the reclaimed matrix, were prepared for comparison. Highly-fluid urea-furfuryl resin was used as a binder, while paratoluensulphonic acid as a hardener. During investigations the hardening process course was determined, it means the wave velocity change in time: cL = f(t). The hardening process kinetics was also assessed (dClx/dt = f(t)). Investigations were carried out on the research stand for ultrasound tests. In addition strength tests were performed.}, type={Artykuły / Articles}, title={Influence of the Reclaim Addition into the Matrix on the Hardening Process Kinetics of the Moulding Sand with Furfuryl Resin}, URL={http://www.czasopisma.pan.pl/Content/103370/PDF/AFE%201_2018_08.pdf}, keywords={Loose self-setting sands, Reclaim, Hardening kinetics, Ultrasound investigations}, }