Applied sciences

Archives of Control Sciences

Content

Archives of Control Sciences | 2020 | vol. 30 | No 3

Download PDF Download RIS Download Bibtex

Abstract

Many nonlinear dynamical systems can present a challenge for the stability analysis in particular the estimation of the region of attraction of an equilibrium point. The usual method is based on Lyapunov techniques. For the validity of the analysis it should be supposed that the initial conditions lie in the domain of attraction. In this paper, we investigate such problem for a class of dynamical systems where the origin is not necessarily an equilibrium point. In this case, a small compact neighborhood of the origin can be estimated as an attractor for the system. We give a method to estimate the basin of attraction based on the construction of a suitable Lyapunov function. Furthermore, an application to Lorenz system is given to verify the effectiveness of the proposed method.

Go to article

Authors and Affiliations

M.A. Hammami
N.H. Rettab
Download PDF Download RIS Download Bibtex

Abstract

In this paper, a parallel multi-path variant of the well-known TSAB algorithm for the job shop scheduling problem is proposed. Coarse-grained parallelization method is employed, which allows for great scalability of the algorithm with accordance to Gustafon’s law. The resulting P-TSAB algorithm is tested using 162 well-known literature benchmarks. Results indicate that P-TSAB algorithm with a running time of one minute on a modern PC provides solutions comparable to the ones provided by the newest literature approaches to the job shop scheduling problem. Moreover, on average P-TSAB achieves two times smaller percentage relative deviation from the best known solutions than the standard variant of TSAB. The use of parallelization also relieves the user from having to fine-tune the algorithm. The P-TSAB algorithm can thus be used as module in real-life production planning systems or as a local search procedure in other algorithms. It can also provide the upper bound of minimal cycle time for certain problems of cyclic scheduling.

Go to article

Authors and Affiliations

Jarosław Rudy
Jarosław Pempera
Czesław Smutnicki
Download PDF Download RIS Download Bibtex

Abstract

In this paper, a new set of intuitionistic fuzzy aggregation operators have been introduced under the environment of intuitionistic fuzzy sets (IFSs). For this, firstly focused on some existing aggregation operators and then new operational rules known as Dombi operation have been pro- posed which make the advancement of flexibility behavior with the parameter. Based on Dombi operation laws, some new averaging and geometric aggregation operators namely, intuitionistic fuzzy Dombi weighted averaging, ordered weighted averaging and hybrid weighted averaging operator, classified as IFDWA, IFDOWA and IFDHWA operators respectively and intuitionistic fuzzy Dombi geometric, ordered weighted geometric and hybrid weighted geometric operators, labeled as IFDWG, IFDOWG and IFDHWG operators respectively have been proposed. Further, some properties such as idempotency, boundedness, monotonicity and commutative are investigated. Finally, a multi-attribute decision-making model has been developed for the proposed operators to select the best mutual fund for investment. The execution of the comparative study has been examined with the existing operators in this environment.

Go to article

Authors and Affiliations

Chiranjibe Jane
Madhumangal Pal
Guiwu Wei
Download PDF Download RIS Download Bibtex

Abstract

Electromagnetic mill installation for dry grinding represents a complex dynamical system that requires specially designed control system. The paper presents model-based predictive control which locates closed loop poles in arbitrary places. The controller performs as gain scheduling prototype where nonlinear model – artificial recurrent neural network, is parameterized with additional measurements and serves as a basis for local linear approximation. Application of such a concept to control electromagnetic mill load allows for stable performance of the installation and assures fulfilment of the product quality as well as the optimization of the energy consumption.

Go to article

Authors and Affiliations

Szymon Ogonowski
Dariusz Bismor
ORCID: ORCID
Zbigniew Ogonowski
Download PDF Download RIS Download Bibtex

Abstract

This paper proposes a design procedure for observer-based controllers of discrete-time switched systems, in the presence of state’s time-delay, nonlinear terms, arbitrary switching signals, and affine parametric uncertainties. The proposed switched observer and the state- feedback controller are designed simultaneously using a set of linear matrix inequalities (LMIs). The stability analysis is performed based on an appropriate Lyapunov–Krasovskii functional with one switched expression, and in the meantime, the sufficient conditions for observer-based stabilization are developed. These conditions are formulated in the form of a feasibility test of a proposed bilinear matrix inequality (BMI) which is a non-convex problem. To make the problem easy to solve, the BMI is transformed into a set of LMIs using the singular value decomposition of output matrices. An important advantage of the proposed method is that the established sufficient conditions depend only on the upper bound of uncertain parameters. Furthermore, in the proposed method, an admissible upper bound for unknown nonlinear terms of the switched system may be calculated using a simple search algorithm. Finally, the efficiency of the proposed controller and the validity of the theoretical results are illustrated through a simulation example.

Go to article

Authors and Affiliations

N.A. Baleghi
M.H. Shafiei
Download PDF Download RIS Download Bibtex

Abstract

Consider the semilinear system defined by

x(i+1) = Ax(i) + f(x(i)), i≥ 0

x(0) = x0 ϵ ℜn

and the corresponding output signal y(i)=Cx(i), i ≥ 0, where A is a n x n matrix, C is a p x n matrix and f is a nonlinear function. An initial state x(0) is output admissible with respect to A, f, C and a constraint set Ω in ℜp if the output signal (y(i))i associated to our system satisfies the condition y(i) in Ω, for every integer i ≥ 0. The set of all possible such initial conditions is the maximal output admissible set Γ(Ω). In this paper we will define a new set that characterizes the maximal output set in various systems (controlled and uncontrolled systems). Therefore, we propose an algorithmic approach that permits to verify if such set is finitely determined or not. The case of discrete delayed systems is taken into consideration as well. To illustrate our work, we give various numerical simulations.

Go to article

Authors and Affiliations

Amine El Bhih
Youssef Benfatah
ORCID: ORCID
Mostafa Rachik
ORCID: ORCID
Download PDF Download RIS Download Bibtex

Abstract

In this paper we have studied the driftless control system on a Lie group which arises due to the invariance of Black-Scholes equation by conformal transformations. These type of studies are possible as Black-Scholes equation can be mapped to one dimensional free Schrödinger equation. In particular we have studied the controllability, optimal control of the resulting dynamics as well as stability aspects of this system.We have also found out the trajectories of the states of the system through two unconventional integrators along with conventional Runge-Kutta integrator.

Go to article

Authors and Affiliations

Archana Tiwari
Debanjana Bhattacharyya
K.C. Pati
Download PDF Download RIS Download Bibtex

Abstract

A new 4-D dynamical system with hyperchaos is reported in this work. It is shown that the proposed nonlinear dynamical system with hyperchaos has no equilibrium point. Hence, the new dynamical system exhibits hidden hyperchaotic attractor. An in-depth dynamic analysis of the new hyperchaotic system is carried out with bifurcation transition diagrams, multistability analysis, period-doubling bubbles and offset boosting analysis. Using Integral Sliding Mode Control (ISMC), global hyperchaos synchronization results of the new hyperchaotic system are described in detail. Furthermore, an electronic circuit realization of the new hyperchaotic system has been simulated in MultiSim software version 13.0 and the results of which are in good agreement with the numerical simulations using MATLAB.

Go to article

Authors and Affiliations

Sundarapandian Vaidyanathan
Irene M. Moroz
Aceng Sambas
Download PDF Download RIS Download Bibtex

Abstract

Many real-time systems can be described as cascade space-state models of different orders. In this paper, a new predefined controller is designed using a Strongly Predefined Time Sliding Mode Control (SPSMC) scheme for a cascade high-order nonlinear system. The proposed control scheme based-on SMC methodology is designed such that the system states reach zero within a determined time prior to performing numerical simulation. Moreover, Fixed Time Sliding Mode Control (FSMC) and Terminal Sliding Mode Control (TSMC) schemes are presented and simulated to provide a comparison with the proposed predefined time scheme. The numerical simulation is performed in Simulink/MATLAB for the proposed SPSMC and the other two existing methods on two examples: second and of third order to demonstrate the effectiveness of the proposed SPSMC method. The trajectory tracking of the ship course system is addressed as an example of a second-order system. Synchronization of two chaotic systems, Genesio Tesi and Coullet, is considered as an example of a third-order system. Also, by using two performance criteria, a thorough comparison is made between the proposed predefined time scheme, SPSMC, and the two no predefined time schemes, FSMC and TSMC.

Go to article

Authors and Affiliations

Ali Soltani Sharif Abadi
Pooyan Alinaghi Hosseinabadi
Saad Mekhilef
Andrzej Ordys

Instructions for authors

Each paper submitted is subject to a review procedure, and the publication decision is based on reviers' comments on the paper. To avoid delay, please prepare the manuscript carefully following the suggestions listed below.

Computer file of the manuscript may be sent by e-mail to the address of Assistant Editor or acs@polsl.pl. Preferred text processors is TeX or LaTeX, however Word and other processors are also acceptable. In case of difficulties in processing the text, the author may be asked to supply the ASCII export of the original file.

Manuscripts sent via ordinary post should be typewritten double-spaced on one side of a standard size (A4) paper. Left side margin should be approximately 3cm (1.2'') wide. Each page should contain approximately 30 lines of 60 characters each. The manuscript including figures and tables together with their captions should be submitted. A separate signed letter giving the Author's preferred address for correspondence and return of proofs should be enclosed. Manuscript is the basis for editorial work.

First page should include the title of the paper, first name(s) and surname(s) of the Author(s), and a short summary (abstract), not longer than 20 lines.

Keywords of max. 5 - 7 items should be included in manuscript.

Numeration. All chapters, including the introduction, should be numbered in arabic numerals. Equations, tables and figures as well as theorems, corollaries, examples etc., should be numbered consecutively throughout the paper in arabic numerals, except in appendices. Appendices should be numbered with capital letters, and numeration should be closed within individual appendices.

If the manuscript is not prepared with TeX, mathematical expressions should be carefully written so as not to arouse confusion. Care should be taken that subscripts and superscripts are easily readable.

Tables and figures should be placed as desired by the Author within the text or on separate sheets with their suggested location indicated by the number of table or figure in the text. Figures, graphs and pictures (referred to as Fig. in the manuscript) should be numbered at the beginning of their caption following the figure. All figures should be prepared as PostScript EPS files or LaTeX picture files; in special cases, bitmaps of figure are also acceptable. The numbers and titles of tables should be placed above the main body of each table.

References should be listed alphabetically at the end of the manuscript. They should be numbered in ascending order and the numbers should be inserted in square brackets. References should be organized as follows. First initial(s), surname(s) of the author(s) and title of article or book. Then, for papers: title of periodical or collective work, volume number (year of issue), issue number, and numbers of the first and the last page; for books: publisher's name(s), place and year of issue. Example:

  1. R. E. Kalman: Mathematical description of linear dynamical system. SIAM J. Control. 1(2), (1963), 152-192.
  2. F. C. Shweppe: Uncertain dynamic systems. Prentice-Hall, Englewood Cliffs, N.J. 1970.


Please, give full titles of journals; only common words like Journal, Proceedings, Conference, etc. may be abbreviated ( to J., Proc., Conf., ... respectively). References to publications in the body of the manuscript should be indicated by the numbers of the adequate references in square brackets. When the paper is set in TeX the preferable form of preparing references is Bib TeX bib database.

Footnotes should be placed in the manuscript, beginning with "Received..." (date to be filled in by Editor), the author's institutional affiliation and acknowledgement of financial support,

This page uses 'cookies'. Learn more